sauter CT P1 Instruction Manual

Sauter GmbH
Ziegelei 1
D-72336 Balingen
E-Mail: [e-mail]
Tel.: +49-[0]7433- 9933-0
Fax: +49-[0]7433-9933-149
Internet: www.sauter.eu
Instruction Manual / Data sheet
CT P1 / CT P2
V. 1.0
12/2018
GB
CT P1 / CT P2 -BA-e-1810

2 CT P1 / CT P2 -BA-e-1810
GB
SAUTER CT P1 / CT P2
V. 1.0 12/2018
Instruction Manual / Data sheet
Summarize:
1Short description........................................................................................... 3
2Available models............................................................................................ 3
2.1 Models CT P1............................................................................................................................ 3
2.2 Models CT P2............................................................................................................................ 3
3Introduction.................................................................................................... 3
4Warning notes................................................................................................ 3
5Warranty......................................................................................................... 4
6Detailed specifications.................................................................................. 4
7Wiring.............................................................................................................. 5
7.1 4-wire diagram .......................................................................................................................... 5
7.2 6-wire diagram (option on request) ........................................................................................ 5
8Dimensions in mm......................................................................................... 5
9Certificate of Compliance.............................................................................. 6

CT P1 / CT P2 -BA-e-1810 3
1 Short description
Stainless steel IP67 (acc. to EN 60529) shear beam load cell
Suitable platform, hopper, bed and other weighing
adhesive sealed
Accuracy OIML R60 C3
OIML certificated
RoHS conform
Option on request: EX, Accuracy C4 / C5, 6 Conductor cable
2 Available models
2.1 Models CT P1
Capacity
Model
500kg
CT 500-3P1
1000kg
CT 1000-3P1
1500kg
CT 1500-3P1
2500kg
CT 2500-3P1
3000kg
CT 3000-3P1
5000kg
CT 5000-3P1
10000kg
CT 10000-3P1
2.2 Models CT P2
with adjusted characteristic value (when ordering more than one cell, this saves time
by reducing the effort required for corner adjustment)
Capacity
Model
500kg
CT 500-3P2
1000kg
CT 1000-3P2
3000kg
CT 3000-3P2
5000kg
CT 5000-3P2
10000kg
CT 10000-3P2
3 Introduction
Please pay attention to the notes of the operating manual: read these operating
manual carefully before commissioning, even if you already have experience with
SAUTER measuring cells.
After receiving the measuring cell, it should be checked in advance whether no
transport damage has occurred, whether the outer packaging or other parts or even
the article itself has been damaged. If any damage is evident, please inform
SAUTER GmbH immediately.
4 Warning notes
Observe the national accident prevention regulations.
Not correct executed use of the measuring cell can lead to serious injuries, death,
material damage and personal injuries. Use only by trained and experienced people.
Never load more than the max. capacity to a measuring cell. Overloaded measuring
cells no longer have the required accuracy. Overloaded or deformed measuring cells
are no longer allowed to use and must be changed quickly.

4 CT P1 / CT P2 -BA-e-1810
Never step under suspended loads.
Always fasten overload- or break security to your construction.
Pay attention to the allowed static and dynamic loads of the used equipment.
Let the measuring cells calibrate at regular intervals.
Only load the measuring cell in its specified load direction. Avoid lateral forces.
Control the measuring cells to deformations and cracks.
Measuring cells with 4-Conductor cable will change their characteristic value when
shortened or extended the cable length.
5 Warranty
The warranty expires at:
Disregard of the specifications of the operating manual
Modification or opening the measuring cell
Overload
Mechanical damages
Damage caused by liquids or media
Natural loss
Not correct installation
6 Detailed specifications
Output sensitivity ( FS )
mV/V
3.0 ± 0.003
Maximum capacity ( Emax )
kg
500, 1000, 1500, 2500, 3000, 5000, 10000
Max.number of load cell
intervals
nLC
3000
Ratio of min. LC verification
interval
Y = Emax /
vmin
10000
Combined Error
%FS
≤± 0.023
Minimum dead load
Of Emax
0%
Safe overload
of Emax
150 %
Ultimate overload
of Emax
300 %
Zero balance
of FS
< ± 1.0 %
Excitation, recommended
voltage
V
5 ~ 12
Excitation maximum
V
18
Input resistance
Ω
350 ± 3.5
Output resistance
Ω
350 ± 3.5
Insulation resistance
MΩ
≥5000 ( at 50VDC )
Compensated temperature
°C
-10 ~+40
Operating temperature
°C
-35 ~ +65
Storage temperature
°C
-40 ~ +80
Recommended torque on
fixation bolts
Nm
M12: 75 M18:500 M24:750

CT P1 / CT P2 -BA-e-1810 5
7 Wiring
Shielded, 4 cable. Shield not connected to element.
Cable diameter: Ø5mm.
Standard cable length for 500kg –1000kg: 4m
Standard cable length for 1500kg –10000kg: 6m
7.1 4-wire diagram
Input(+)
Output(-)
Input (-)
Output(+)
Red
White
Black
Green
7.2 6-wire diagram (option on request)
Input(+)
Sense(+)
Output(-)
Sense(-)
Input(-)
Output(+)
Red
Blue
White
Yellow
Black
Green
8 Dimensions in mm
Dimension
Capacity
L
L1
L2
L3
L4
B
B1
H
H1
H2
H3
H4
ØD
M

6 CT P1 / CT P2 -BA-e-1810
9 Certificate of Compliance
The Certificate of Compliance can be downloaded from the website www.sauter.eu
500kg –
1500kg
130
15.8
25.4
76.2
54.2
31.8
34
31.8
15.8
14.5
15.8
4.8
13.5
M
12
x 1.75
2500kg –
5000kg
171.5
19.1
38.1
95.3
77.2
38.1
40
38.1
18.8
17.5
18.8
4.8
19.8
M
18
x 1.5
10000kg
222.3
25.4
50.8
120.7
101.6
50.8
52.4
50.8
25.4
-
-
-
26
M
24 x 2