Savant DigiFlow 6710M-22 User manual

1
Savant DigiFlow 6710M-22, Mini Flow Totalizer and Flow Rate Meter (Liter mode)
SAVANT ELECTRONICS INC.
1670-3, Sec.1, Huanzhong road, Taichung 40761, Taiwan
Tel : [phone] Fax : [phone]
Email : [e-mail]
Website : www.homewaterfilter.com.tw
Features :
Flow totalizing up to 99999 liters
Flow rate display from 1.0 to 15.0 liter/min.
Battery operated, 2 AA batteries
Low battery power alert
Automatic data memorized when battery power is off
Application :
Water cooler
Water dispenser
Cooling system for machinery
1.0 Electrical :
Operating Voltage : 3 DC Volts
Operating Current : 1.0 mA (work), 0.015 mA (sleep)
2.0 Mechanic :
40.5
29.9
77
39.2
12.7
3.0 Application :

2
Installation Method : Horizontal installation ONLY
Flow Direction : One way
Flow Rate : 1.0 – 15.0 liter/min
0° 30°30°
Max. M3x10mm
4.0 General :
Temperature : 0 to 80℃(32 to 170 ℉)
Pressure : Max. 6.0 bar (85 psi)
Weight : 140 g (5.38 oz)
Accuracy : +/- 10%
Connection : 3/8 inch BSP male
Materials : Sensor Body : Acetal Copolymer, TICONA M90
Turbine : Acetal Copolymer, TICONA M90
Stick of Turbine : #304 Stainless Steel
O-Ring : EPDM Rubber
Housing:ABSresin
5.0 Operation Guide
5.1 Install Batteries
Slide off the cover case of the battery room, and put into 2 AA batteries. Then slide the cover case
back.
5.2 Connecting Fitting
The specification of the DigiFlow 6710M-22 Mini Flow connectors is 3/8” BSP male. You could
use any 1/4” BSP male connectors.
5.3 Operating
The DigiFlow 6710M-22 Mini Flow will automatically turn on when there is water flowing through
the sensor. It will automatically turn off in 10 seconds when there is no water flowing.
5.4 Display and Mode Selection :

3
Press the “DISPLAY” button will turn on the LCD of the DigiFlow 6710M-22 Mini Flow . Pressing
the “DISPLAY” button again could choose to display accumulated flowing volume (flow
totalization) or real-time flow rate.
5.5 Reset
Use stick to keep pressing the “RESET” button for 4 seconds, the total measuring volume will be
reset to be zero.
5.6 Low Battery Power Alert
When the battery power lower than normal working level, the buzzer will beep twice to notice and
the battery symbol on the screen will blink to notice user to change the battery. Once the batteries
are replaced, the alert will be released. The data will be kept in memory and stored back when user
replace the batteries.