Saveo Scan SAVEO-RV2-RCCD User manual

Operating Elements
Extend retractable
arm
Press button and slide
outwards to extend the
arm
Attaching your smartphone to scanner using the
universal holder
Extend the retractable arm before placing phone in holder and
then pushing it rmly back against the phone.
Secure phone in
holder
Insert phone
Attach your smartphone
12 3
Getting Started
Power Switch
Power switch is located on the
underside of the scanner.
On the underside of the scanner you will nd a small recessed
button.
Use a paper clip or tooth pick to push the button until you hear a
notication sound.
Ensure power switch remains depressed after you release it.
Power on Saveo Scan
Switch on and Charge your Scanner
Please switch on your scanner (as illustrated) and place it in the
cradle to charge for 3~4 hours before rst use.
If you want to charge smartphone and scanner simultaneously,
please switch scanner to right “C” (charge mode) before placing
it in the cradle.
SAVEO-RV2-RCCD
*Please remove the protective sticker from window
before use
Select the Charge & Data model for the device type
by scanning the barcode below:
Trigger/Power
On button
Wrist Strap
Universal Holder
USB Type-C
Micro USB
Exit Window
Optimize Device Charging
LED indicator
Charging Cradle
Switch for Operation Mode
and Charge Mode/Bluetooth
Mode
‘To Device’ Cable
Use the appropiate cable type to
connect to smartphone/tablet
Type-C
Micro USB
For Optimal Charging, please use the original USB
cable & adaptor supplied with your mobile device.
Connect phone to scanner
USB connection typo and port location vary on dierent
models of smartphone, the cable can be congured for
your specic model, Micro USB or USB Type-C. For iOS
devices, please use a Saveo Lightning cable.

Connecting via USB OTG
Switch scanner to Operation Mode (Data trans-
mission via USB OTG)
Switch to left:
Operation Mode/
Data transmission
Conrm scanner is connected
Saveo Scan is detected by your smartphone as an external
keyboard. A message will appear on screen to notify you that a
USB device has been connected.
You are now connected. Start scanning.
Scan the Wired USB OTG Communication
barcodes below
Demo
%W%I%R
Demo
%E%R%A
Connecting via Bluetooth
Enable Bluetooth on your device
Go to your phone’s homescreen and nd “Settings”, then
“Bluetooth” and turn Bluetooth on.
Switch scanner to Charge Mode/Bluetooth Mode
Scan the Wireless BT Communication barcodes
below
Demo
%W%L%T
When Bluetooth is enabled, the LED will remain red until the
scanner has been paired with a Bluetooth device.
Switch to right:
Charge Mode/
Bluetooth
Mode
Demo
%E%R%A
Scan Bluetooth Prole Barcodes below
After you scan the Bluetooth prole barcodes below, your
scanner will become visible to Bluetooth enabled devices within
range.
Demo
%H%I%D
HID Prole
A1
A2
Demo
%B%R%C
Search for devices
Your phone will automatically search for devices, Saveo Scan will
appear as an external keyboard with a unique identier number
(R-xxxxxx).
Select R-xxxxxx
to connect
Please note: devices only need to be paired once. When they are within
Bluetooth range they will automatically attempt to connect to each other. If
you wish to pair to another device it is recommended you rst unpair this
device.
You are now connected. Start scanning.
4 5 6
Please note: The scanner should only be paired with one device
at a time. Before you pair your scanner to another device, please
rst unpair it from the device in use. Otherwise it will appear on
your list of “Available Devices” but will not connect. In this case,
please refer to “Unpairing your device” in this guide.
Select scanner from “Available
Devices”and wait for pairing
process to complete.
Devices are now
paired
Once “Connected” is
displayed, your device is
paired to the scanner. Your
scanner is now ready to use.

There are two operating modes on the scanner, Data transmis-
sion mode and Data Storage Mode.
Scan the appropriate barcodes when switching between these
two modes.
Please note: Switching between modes will wipe the scanner’s
internal memory.
Operating Modes
Data Transmission Mode (Default)
Our Default setting is Data Transmission mode. In this mode data
will be sent to smartphone/tablet directly.
To enter Data Transmission Mode please scan the follwing
barcodes.
Demo
%E%R%A
Demo
%M%A%F
Enter Data Transmission Mode
Green/Orange LED ashes followed by 3 beeps.
Demo
%M%A%N
Data Storage Mode
In this mode, data will be saved directly to scanner’s memory.
Scan Transmit Memory Data to receive data stored on scanner’s
internal memory.
Enter Data Storage Mode
Green/Orange LED ashes followed by 3 beeps.
Demo
%E%R%A
To enter Data Storage Mode please scan the follwing barcodes.
Demo
%E%R%A
Clean Memory Data
Green/Orange LED ashes
followed by 3 beeps.
Demo
%R%E%C
Transmit Memory Data
Green/Orange LED ashes
followed by 3 beeps.
Transmit Memory Data
Scan the following barcode to receive data stored in the
scanner’s internal memory..
After data is transmitted to your device it remains on the
scanner’s internal memory. Scan the following barcode to clear
the memory if you do not wish to send this data again.
When the battery power is too low, the Orange LED will ash
and beep once. Scanner should be charged immediately. If
scanner shuts down it is recommended to charge it fully then
power it back on.
Under power-saving mode, there will not be an LED
indication when charging.
Orange LED ON Full charged
Orange LED (Flashing) Charging / Low battery
Red LED ON Oine / Out of Range
Green LED ON Good read
Orange LED ON Good read (Batch mode)
LED Indicator Information
LED Indicator
Reset to Defaults
Reset Conguration to Defaults (scan from A1to A6)
HID Prole
A1
A2
A3
A4
A5
A6
Demo
W010F01
Demo
WFFD980
Demo
W100900
Demo
WFFD9C3
Demo
W010F00
Demo
%D%F%T
Demo
Current Battery Level
Scan to receive the current
battery level
Scan the following barcode to send battery level information
to your device. The format is outlined in the table below.
%^4^% 80% - 100%
%^3^% 55% - 80%
%^2^% 30% - 55%
%^1^% 10% - 30%
%^0^% under 10%
Battery Level Status
7 8 9

Power saving mode is enabled by default and will put the
scanner to sleep after 1 minutes inactivity. To wake up the
scanner press the trigger.
Demo
%P%D%T00
Disable
Scan to disable power saving
mode
Demo
%P%D%T01
Below are the barcodes to disable/enable power saving mode.
Power Saving ModeTransmission Speed
Transmission speed is dependent on your device. In order not to
lose data please choose the correct speed. Mid Speed is the
default.
Mid Speed
Transmission
(Default)
High Speed
Transmission
Low Speed
Transmission
Demo
%B%T%H
Demo
Demo
%B%T%L
Before connecting the scanner to another device it is
recommended you rst unpair from the current device.
Go to the Bluetooth menu on your phone and select the
option menu for scanner from list of paired devices.
Choose “Forget this Device”/”Unpair”
Unpairing your device
1 Minute
Enter Power Saving Mode
after 1 minutes inactivity
5 Minute
Enter Power Saving Mode
after 5 minutes inactivity
15 Minute
Enter Power Saving Mode
after 15 minutes inactivity
30 Minute
Enter Power Saving Mode
after 30 minutes inactivity
10 11 12
Sound Settings
Scan the barcodes below in order (A1 - A3, B1 - B3) to select
whether or not the decoder issues a beep signal after a good
decode. If selecting Disable, beeper signals are issued during
parameter menu scanning and to indicate errors.
A1
A2
A3
B1
B2
B3
Enable
(default)
Disable
Full Product Manual and Advanced Settings Documents
can be downloaded online at:
www.saveoscan.com/downloads
Optional Product Acccesories and Parts can be purchased
online at: www.saveoscan.com/shop
Further Information

Scanning with Simplicity
www.saveoscan.com
US PH: [phone]
UK PH: [phone]
[e-mail]
SAVEO-RV2-RCCD
Scan Engine Specific
User Manual

Table of Contents
Chapter 1 Getting Started..................................................................................................................................1
Introduction..............................................................................................................................................1
About This Guide.....................................................................................................................................2
Connecting EVK and PC.........................................................................................................................2
Barcode Scanning ...................................................................................................................................2
Configuring the CR2307..........................................................................................................................2
Command Programming ................................................................................................................... 2
Barcode Programming......................................................................................................................3
Enter/Exit Setup ........................................................................................................................3
Programming Barcode Data......................................................................................................3
Factory Defaults ........................................................................................................................4
Chapter 2 Scan Mode.........................................................................................................................................5
Manual Mode...........................................................................................................................................5
Continuous Mode.....................................................................................................................................6
Sense Mode.............................................................................................................................................9
Command Trigger Mode........................................................................................................................13
Chapter 3 Notification......................................................................................................................................14
Good Read Beep...................................................................................................................................14
Decode Result Notification....................................................................................................................15
Other Settings........................................................................................................................................16
Silent Mode.....................................................................................................................................16
Illumination......................................................................................................................................16
Chapter 4 Communication Settings...............................................................................................................17
TTL-232 Interface..................................................................................................................................17
Baud Rate.......................................................................................................................................18
Parity Check ...................................................................................................................................19
Stop Bit ...........................................................................................................................................19
Data Bit...........................................................................................................................................20
USB Interface ........................................................................................................................................22
USB HID-KBW................................................................................................................................22

Standard Keyboard .................................................................................................................23
Emulate ALT+Keypad .............................................................................................................23
Function Key Mapping.............................................................................................................24
ASCII Function Key Mapping Table........................................................................................25
USB Country Keyboard Types................................................................................................26
Inter-Keystroke Delay..............................................................................................................29
Convert Case...........................................................................................................................30
Emulate Numeric Keypad .......................................................................................................31
Access the Engine with Your Program ...................................................................................32
Acquire Scanned Data ............................................................................................................32
VID/PID....................................................................................................................................32
Chapter 5 Data Formatting..............................................................................................................................33
Introduction............................................................................................................................................33
Prefix Sequence ....................................................................................................................................34
Custom Prefix........................................................................................................................................35
Enable/Disable Custom Prefix........................................................................................................35
Set Custom Prefix...........................................................................................................................35
AIM ID Prefix..........................................................................................................................................36
CODE ID Prefix......................................................................................................................................37
Restore All Default Code IDs..........................................................................................................37
Set Code ID....................................................................................................................................37
Custom Suffix ........................................................................................................................................41
Enable/Disable Custom Suffix........................................................................................................41
Set Custom Suffix...........................................................................................................................42
Terminating Character Suffix.................................................................................................................43
Enable/Disable Terminating Character Suffix................................................................................43
Set Terminating Character Suffix...................................................................................................44
Chapter 7 Symbologies ...................................................................................................................................45
Introduction............................................................................................................................................45
Global Settings ......................................................................................................................................45
Enable/Disable All Symbologies.....................................................................................................45
Code 128 ...............................................................................................................................................46
Restore Factory Defaults................................................................................................................46
Enable/Disable Code 128...............................................................................................................46
Set Length Range for Code 128.....................................................................................................47

UCC/EAN-128 .......................................................................................................................................48
Restore Factory Defaults................................................................................................................48
Enable/Disable UCC/EAN-128.......................................................................................................48
Set Length Range for UCC/EAN-128.............................................................................................49
AIM 128..................................................................................................................................................50
Restore Factory Defaults................................................................................................................50
Enable/Disable AIM 128.................................................................................................................50
Set Length Range for AIM 128.......................................................................................................51
EAN-8 ....................................................................................................................................................52
Restore Factory Defaults................................................................................................................52
Enable/Disable EAN-8....................................................................................................................52
Transmit Check Digit ......................................................................................................................52
Add-On Code..................................................................................................................................53
Add-On Code Required..................................................................................................................54
EAN-8 Extension ............................................................................................................................54
EAN-13 ..................................................................................................................................................55
Restore Factory Defaults................................................................................................................55
Enable/Disable EAN-13..................................................................................................................55
Transmit Check Digit ......................................................................................................................55
Add-On Code..................................................................................................................................56
Add-On Code Required..................................................................................................................57
ISSN.......................................................................................................................................................58
Restore Factory Defaults................................................................................................................58
Enable/Disable ISSN......................................................................................................................58
ISBN.......................................................................................................................................................59
Restore Factory Defaults................................................................................................................59
Enable/Disable ISBN......................................................................................................................59
Set ISBN Format.............................................................................................................................60
UPC-E....................................................................................................................................................61
Restore Factory Defaults................................................................................................................61
Enable/Disable UPC-E...................................................................................................................61
Transmit Check Digit ......................................................................................................................61
Add-On Code..................................................................................................................................62
Add-On Code Required..................................................................................................................63
Transmit System Character............................................................................................................63
UPC-E Extension............................................................................................................................64
UPC-A....................................................................................................................................................65

Restore Factory Defaults................................................................................................................65
Enable/Disable UPC-A...................................................................................................................65
Transmit Check Digit ......................................................................................................................66
Transmit Preamble Character ........................................................................................................66
Add-On Code..................................................................................................................................67
Add-On Code Required..................................................................................................................68
Interleaved 2 of 5...................................................................................................................................69
Restore Factory Defaults................................................................................................................69
Enable/Disable Interleaved 2 of 5 ..................................................................................................69
Check Digit Verification ..................................................................................................................70
Set Length Range for Interleaved 2 of 5 ........................................................................................71
ITF-6 ......................................................................................................................................................72
Restore Factory Defaults................................................................................................................72
Enable/Disable ITF-6......................................................................................................................72
ITF-14 ....................................................................................................................................................73
Restore Factory Defaults................................................................................................................73
Enable/Disable ITF-14....................................................................................................................73
Deutsche 14...........................................................................................................................................74
Restore Factory Defaults................................................................................................................74
Enable/Disable Deutsche 14..........................................................................................................74
Deutsche 12...........................................................................................................................................75
Restore Factory Defaults................................................................................................................75
Enable/Disable Deutsche 12..........................................................................................................75
Matrix 2 of 5 (European Matrix 2 of 5)...................................................................................................76
Restore Factory Defaults................................................................................................................76
Enable/Disable Matrix 2 of 5 ..........................................................................................................76
Check Digit Verification ..................................................................................................................77
Set Length Range for Matrix 2 of 5 ................................................................................................78
Industrial 25 ...........................................................................................................................................79
Restore Factory Defaults................................................................................................................79
Enable/Disable Industrial 25...........................................................................................................79
Check Digit Verification ..................................................................................................................80
Set Length Range for Industrial 25.................................................................................................81
Standard 25...........................................................................................................................................82
Restore Factory Defaults................................................................................................................82
Enable/Disable Standard 25...........................................................................................................82
Check Digit Verification ..................................................................................................................83

Set Length Range for Standard 25.................................................................................................84
Code 39 .................................................................................................................................................85
Restore Factory Defaults................................................................................................................85
Enable/Disable Code 39.................................................................................................................85
Check Digit Verification ..................................................................................................................86
Transmit Start/Stop Character........................................................................................................87
Enable/Disable Code 39 Full ASCII ...............................................................................................87
Set Length Range for Code 39.......................................................................................................88
Codabar.................................................................................................................................................89
Restore Factory Defaults................................................................................................................89
Enable/Disable Codabar.................................................................................................................89
Check Digit Verification ..................................................................................................................90
Start/Stop Character.......................................................................................................................91
Set Length Range for Codabar ......................................................................................................92
Code 93 .................................................................................................................................................93
Restore Factory Defaults................................................................................................................93
Enable/Disable Code 93.................................................................................................................93
Check Digit Verification ..................................................................................................................94
Set Length Range for Code 93.......................................................................................................95
Code 11 .................................................................................................................................................96
Restore Factory Defaults................................................................................................................96
Enable/Disable Code 11.................................................................................................................96
Check Digit Verification ..................................................................................................................97
Set Length Range for Code 11.......................................................................................................98
Plessey ..................................................................................................................................................99
Restore Factory Defaults................................................................................................................99
Enable/Disable Plessey..................................................................................................................99
Check Digit Verification ................................................................................................................100
Set Length Range for Plessey......................................................................................................101
MSI-Plessey.........................................................................................................................................102
Restore Factory Defaults..............................................................................................................102
Enable/Disable MSI-Plessey........................................................................................................102
Check Digit Verification ................................................................................................................103
Set Length Range for MSI-Plessey..............................................................................................104
RSS-14 ................................................................................................................................................105
Restore Factory Defaults..............................................................................................................105
Enable/Disable RSS-14................................................................................................................105

Transmit Application Identifier “01”.........................................................................................105
RSS-Limited.........................................................................................................................................106
Restore Factory Defaults..............................................................................................................106
Enable/Disable RSS-Limited........................................................................................................106
Transmit Application Identifier “01”.........................................................................................106
RSS-Expand........................................................................................................................................107
Restore Factory Defaults..............................................................................................................107
Enable/Disable RSS-Expand .......................................................................................................107
Appendix.........................................................................................................................................................108
Factory Defaults Table ........................................................................................................................108
AIM ID Table........................................................................................................................................115
Code ID Table......................................................................................................................................117
ASCII Table .........................................................................................................................................118
Digit Barcodes .....................................................................................................................................122
Save/Cancel Barcodes........................................................................................................................125
F1~F12 ................................................................................................................................................126

** Enter Setup
1Exit Setup
Chapter 1 Getting Started
Introduction
The CR2307 scan engines, armed with computerized image recognition system, bring about a new era of
1D barcode scan engines.
The CR2307's 1D barcode decoder chip ingeniously blends technology and advanced chip design &
manufacturing, which significantly simplifies application design and delivers superior performance and
solid reliability with low power consumption.
The CR2307 supports EAN-13, EAN-8, UPC-A, UPC-E, ISSN, ISBN, Codabar, Code 128, Code 93, ITF-6,
ITF-14, Interleaved 2 of 5, Industrial 2 of 5, Standard 2 of 5, Matrix 2 of 5, GS1 Databar, Code 39, Code
11, MSI-Plessey, Plessey.
This compact engine weighs only 6 grams and fits easily into even the most space-constrained
equipments such as data collectors, meter readers, ticket validators and PDAs. Moreover, the instant
power on/off feature along with ultra low power consumption brings greater efficiency and convenience in
barcode scanning.

** Enter Setup
Exit Setup 2
About This Guide
This guide provides programming instructions for the CR2307. Users can configure the scan engine by
scanning the programming barcodes included in this manual or by sending host commmands to the
device.
The CR2307 has been properly configured for most applications and can be put into use without further
configuration. Users may check the Factory Defaults Table in Appendix for reference. Throughout the
manual, programming barcodes marked with asterisks (**) are factory default values.
Connecting EVK and PC
The EVK tool is provided to assist users in application development for the CR2307. The CR2307 can be
connected to the EVK via a 12-pin flat flexible cable. Either USB connection or RS-232 connection can be
used when connecting the EVK to PC.
Barcode Scanning
Powered by imaging technology, the CR2307 features fast scanning and accurate decoding. Barcodes
rotated at any angle can still be read with ease. When scanning a barcode, simply center the aiming
beam projected by the CR2307 over the barcode.
Configuring the CR2307

** Enter Setup
3Exit Setup
Barcode Programming
The CR2307 can be configured by scanning programming barcodes. All user programmable
features/options are described along with their programming barcodes/commands in the following
sections.
Enter/Exit Setup
** Enter Setup Exit Setup
Programming Barcode Data
** Do Not Transmit Programming Barcode Data Transmit Programming Barcode Data

** Enter Setup
Exit Setup 4
Factory Defaults
Scanning the following barcode can restore the engine to the factory defaults.
You may need to reset your engine when:
1. engine is not properly configured so that it fails to decode barcodes;
2. you forget previous configuration and want to avoid its impact;
3. functions that are rarely used have been enabled for the time being.
Restore All Factory Defaults

** Enter Setup
5Exit Setup
Chapter 2 Scan Mode
Manual Mode
Manual Mode (default):A trigger pull activates a decode session. The decode session continues until the
barcode is decoded or the trigger is released or the decode session timeout expires.
** Manual Mode
Decode Session Timeout: This parameter sets the maximum time decode session continues during a
scan attempt. It is programmable in 1s increments from 1s to 255s. The default timeout is 15s. If the
parameter is set to 0, the decode session timeout is infinite.
Decode Session Timeout
Example: Set the decode session timeout to 5s
1. Scan the Enter Setup barcode.
2. Scan the Decode Session Timeout barcode.
3. Scan the numeric barcode “5”. (See the Digit Barcodes section in Appendix)
4. Scan the Save barcode. (See the Save/Cancel Barcodes section in Appendix)
5. Scan the Exit Setup barcode.

** Enter Setup
Exit Setup 6
Continuous Mode
Continuous Mode: A trigger press activates the engine to scan and decode at user-specified intervals,
i.e. the timeout between decodes. Each decode session lasts until barcode is decoded or the decode
session timeout expires. To suspend/resume the operation, simply press the trigger.
Continuous Mode
Decode Session Timeout: This parameter sets the maximum time decode session continues during a
scan attempt. It is programmable in 1s increments from 1s to 255s. The default timeout is 15s. If the
parameter is set to 0, the decode session timeout is infinite.
Decode Session Timeout
Example: Set the decode session timeout to 5s
1. Scan the Enter Setup barcode.
2. Scan the Decode Session Timeout barcode.
3. Scan the numeric barcode “5”. (See the Digit Barcodes section in Appendix)
4. Scan the Save barcode. (See the Save/Cancel Barcodes section in Appendix)
5. Scan the Exit Setup barcode.

** Enter Setup
7Exit Setup
Timeout between Decodes:This parameter sets the timeout between decode sessions. When a decode
session ends, next session will not happen until the timeout between decodes expires. It is programmable
in 0.1s increments from 0.0s to 25.5s. The default timeout is 1.0s.
Timeout between Decodes
Example: Set the timeout between decodes to 5s
1. Scan the Enter Setup barcode.
2. Scan the Timeout between Decodes barcode.
3. Scan the numeric barcodes “5”and “0”. (See the Digit Barcodes section in Appendix)
4. Scan the Save barcode. (See the Save/Cancel Barcodes section in Appendix)
5. Scan the Exit Setup barcode.

** Enter Setup
Exit Setup 8
Timeout between Decodes (Same Barcode) can avoid undesired rereading of same barcode in a given
period of time. This parameter sets the timeout between decodes for same barcode. It is programmable
in 0.1s increments from 0.1s to 25.5s. The default timeout is 3.0s. If the parameter is set to 0, the timeout
between decodes (same barcode) is infinite.
Note: This parameter is only valid when the Disallow Rereading Same Barcode is enabled.
Timeout between Decodes (Same Barcode)
Allow Rereading Same Barcode: The engine is allowed to re-read same barcode, ignoring the timeout
between decodes (same barcode).
Disallow Rereading Same Barcode: The engine is not allowed to re-read same barcode before the
timeout between decodes (same barcode) expires.
Allow Rereading Same Barcode ** Disallow Rereading Same Barcode
Example: Set the timeout between decodes (same barcode) to 5s
1. Scan the Enter Setup barcode.
2. Scan the Timeout between Decodes (Same Barcode) barcode.
3. Scan the numeric barcodes “5”and “0”. (See the Digit Barcodes section in Appendix)
4. Scan the Save barcode. (See the Save/Cancel Barcodes section in Appendix)
5. Scan the Exit Setup barcode.