SB SB-PFRDC200S User manual

Owners Manual
and Assembly Guide
SB Fitness Equipment
PEC FLY / REAR DELT COMBO MACHINE
SB-PFRDC200S

1

PARTS LIST AND PART NUMBERS
2

 

$77$&+ THE WEIGHT STACK FRAME ASSEMBLY(5) TO THE MAIN
FRAME ASSEMBLY UPRIGHT AND SEAT MOUNT(1). INSTALL 7+(RUBBER
FOOT 3$'6AT THIS TIME. (OPTIONAL)
3




1.) INSTALL GUIDERODS(7) INTO HOLES LOCATED INSIDE BOTTOM OF WEIGHT STACK FRAME.
2.) SLIDE #32 SPACERS ON FROM TOP OF GUIDE RODS TO HAVE 2 ON EACH GUIDE ROD AT THE BOTTOM.
3.) INSTALL WEIGHT PLATES(29). SMALLEST WEIGHT PLATE IS LAST AS THIS IS THE TOP PLATE.
4.) INSTALL #27 ON TO GUIDE ROD AND INTO TOP PLATE.
5.) INSTALL SELECTOR ROD(28) INTO WEIGHT STACK CENTER HOLE.
6.) SECURE TOP OF GUIDE RODS TO WEIGHT STACK FRAME USING #9 PLATE AND #17 BOLTS.
7.) PLACE SELECTOR PIN(30) INTO WEIGHT STACK.
** REFER TO PAGE 7 & 8 FOR FURTHER ASSISTANCE**
4

     
 

      
+     


5

INSTALL BACK AND SEAT CUSHIONS(27 & 28). INSTALL FRONT AND
REAR WEIGHT STACK GUARDS(25 & 26).
6

7

INSTALL WEIGHT STACK CABLE
8
WARNING: THE SCREWS AT EACH JOINT OF THE
WEIGHT STACK CABLE MUST BE FULLY TIGHTENED

)1!!58
+)8
#%8+#8
1-'%8
1+8)!/8
)+'1/8%#8 8 )8!5++8!/8'#'8#%88
3/8 -/ 8 !8
)+'1/8/1+-8) 8!58%8++8!/
)+'1/8#%-'%-8 
 83848  8!848    8
-5  ,  7/  +  $  *0(,".8#%'+  8%/+'+8!/'  8++8!/'  8/+) : '  8
+'#'-8#'+8%8+'#%'-8#%'+
 81))+8!/--#1-8'+-

PRODUCT DESCRIPTION, SPECS, & FEATURES
SB FITNESS EQUIPMENT / SB-PFRDC200S
9