SBS FAST SKIN User manual

1
Operationmanual

2
Index
Introduction
Turning on and off
Machine calibration
Cutting a FastSkinfilm
Filmapplication
Maintenance
Troubleshooting
4
12
15
23
33
44
50
FAST SKIN -OPERATION MANUAL

3
Introduction

Introduction
This operation manual is made for people that are using the Fast Skin system in a store
and is meant to help in day-to-day operations of the machine as well as areminder of the
correctfilm-applicationtechniques.
In case of issues that are not foreseen in this manual, do not hesitate to contact our
support at [e-mail].
Don’t panic: Fast Skin machine will always guide you with detailed and easy to
understand on-screen instructions.
Before starting:The correct use of Fast Skin requires that the machine is positioned on a
stable and levelled surface such as atable or aworkbench with enough room around it to
be able to insert cutting materials and operate the machine normally.
4FAST SKIN -OPERATION MANUAL

5
FastSkinMachine Parts 1 - FastSkinmachine
2 - Bladeholder
3 - Cuttingstrip
4 - Mainscreen
5 - Power button
6 - Filmlocking lever
7- SIM card slot
2
1
4
7
5
6
3
FAST SKIN -OPERATION MANUAL

6
FastSkinMachine Parts 7- Filmlocking lever
9
8
8 Power input
9Ethernetport
7
FAST SKIN - OPERATION MANUAL

FastSkinStarterKit
1 - Skidproofapplication mat
2 – Spatula L
3 – SpatulaXL
4- Tabletspatula
5 - Cleaningcloth
6 - Cleaning liquid
7 - Hotairgun
8– Standard sheet
9- Tweezers
10 – Tool
11– Power cord and power supply
12 – BladeHolder
13 – Spare blades
14 - Screwdriver
1
23
4
6
7
8
9
10
12
14
13
11
5
FAST SKIN -OPERATION MANUAL
7

FastSkinfilm composition
1
2
3
4
Installation layer: this layer adhers to the installation
site and holds the film in place during the application.
This layer has a cut in the middle that is used to first
install onehalf of thefilm andthantheother.
1Protection layer:this layer protectsthefilm layer
during installation. Optional, used for transparent film
only.
2Film layer: this is the part that remains on the device
after the installation.
3
4Bottom layer: this layer holds the film together while
cutting it in themachine. It should remainmostly intact
during cutting.
FAST SKIN -OPERATION MANUAL
8

On-screencommands
3
1
1 2
3
Refreshbutton:reloads all available
cuts at once
9
2Menubutton:opensthemenu
List of device brands
3
FAST SKIN -OPERATION MANUAL

On-screencommands
4
4
5
6
5
6
7
8
7
8
Search:lets you search for a
device
10
Materials:configures the
machine to usedifferent Fast
Skinmaterials
Calibration:startsmachine
calibration procedure
Send a new support request
Disconnectthemachine.You
will have to log-in again to use
themachineafterthis
FAST SKIN -OPERATION MANUAL

1
1
Turning on and off

Turningon and off
12
Before turning FastSkinon, make sure to:
1Insertthe power connectorintotheappropriateport on the FastSkinmachine.
2Connectthe power cable to the powersupplier.
3Insertthe power cableintothemains.
FAST SKIN -OPERATION MANUAL

Turningon and off
Pressthe powerbuttonandhold it until you see
SBSlogoappear on thescreen
Pressthe powerbuttonandhold it until «Reboot»
and «Power off»menuappears on thescreen.
Choose «Power off».
Turningon Turning off
FAST SKIN -OPERATION MANUAL
13

1
4
Machine calibration

Machinecalibration
FastSkinmachineneeds to be calibrated
Calibration is also suggested when issues during machine operation are encountered.
The calibration is guided by the machine and requires carefuly following the on-screen
instructions. The calibration may also be manually started up through the menu.
Uponfirst usethe calibration is required before startingnormaloperation
After a longperiod of inactivity
Aftereachbladechange
FAST SKIN -OPERATION MANUAL
15

Machinecalibration
Insert a sheet of standard materialandlock it in place.
1
FAST SKIN -OPERATION MANUAL
16

Machinecalibration
You’re asked to position the bladeholder in such a way that you can
change itssettingeasily without having to unmountit
2
17 FAST SKIN -OPERATION MANUAL

Machinecalibration
Theon-screeninstructionsask you to settheblade to 5 by turningthe
blade holder cup.
3
18 FAST SKIN -OPERATION MANUAL

Machinecalibration
Start a calibrationcut.
4
19 FAST SKIN -OPERATION MANUAL

Machinecalibration
You have to evaluate the cut the machine has
performed and choose one of the three video
representations of the result that best resemblesthe
result.
The appropriate result is when youcan easily take
out the square cut, leaving the bottom layer of the
film intact. If that’s what you have obtained you have
to choose the centralvideo.
In case the cut is too shallow, choose the top video.
In case the cut is too deep and all four layers of the
film are being pierced, choose the bottom video.
At this pointyou’re asked to inspect the
calibration cut performed by themachine
5
20 FAST SKIN -OPERATION MANUAL