SC&T HE02EIXP User manual

Smart Cabling & Transmission Corp.
V1.0_190815B
HDMI over HDBaseT Extender
User Manual
Model : HE02EIXP
4K 60Hz 4:4:4 HDMI & IR/R232/POH CAT5e Extender 70M

1
User Manual
HE02EIXP
Introduction
HE02EIXP is a 4K HDMI over HDBaseT™ extender that can use an Ethernet cable to send uncompressed
HDMI and bi-directional IR signals with resolution up to 4K@60Hz 4:4:4 and transmission distance up to
70M. The extender also supports PoH (Power over HDBaseT), designed to provide power from one side
(TX/ RX) to another.
Features
Resolution up to 4K@60Hz 4:4:4.
Signal extension up to 70M over CAT5e/6 cable.
Supports PoH (Power over HDBaseT™), power from either TX or RX.
Supports bi-directional IR, RS232 transmission.
Support CEC pass through, EDID management.
Installation view
Cable
Link cable recommend use high quality CAT5e, CAT6, CAT6a, CAT7 UTP / STP or FTP cable. Poor quality
cable or network connection or improper construction will cause unstable connection, video or sound
disruptions, picture noise appears.
HDBaseT Distance Chart by Different Cable
Cable Type
Range
Supported Video
CAT5e / CAT6
60m
Up to
1080p 60Hz 12bit
CAT6e / CAT7
70m
CAT5e / CAT6
35m
Up to 4096x2160@60Hz 4:4:4
CAT6a / CAT7
40m
If connection through the wall socket, the cable length must less 5 meters between HDMI extender and
wall jack, as below drawing

2
User Manual
HE02EIXP
MAX 70M
5M MAX 5M MAX
RJ45 Define
Video Link (TIA/EIA-568-B)
1. Orange-white DATA0 +
2. Orange DATA0 -
3. Green-white DATA1 +
4. Blue DATA2 +
5. Blue-white DATA2 -
6. Green DATA1 -
7. Brown-white DATA3 +
8. Brown DATA3 -
Panel view
HE02EIXPT HE02EIXPR
LED Instruction
Color
Status
HE02EIXPT
HE02EIXPR
HE02EIXPT
Wall Jack
HE02EIXPR
Wall Jack

3
User Manual
HE02EIXP
Firmware updated Switch
1. Reserved
2. FW1 updated
3. FW2 updated
4. FW3 updated
RS232 Define
DB9 FEMALE DB9 MALE
RS232
RS232
Footprint
Define
Footprint
Define
Pin 2
TX
Pin 2
RX
Pin 3
RX
Pin 3
TX
Pin 5
GND
Pin 5
GND
Package Include
HE02EIXPT x 1
HE02EIXPR x 1
DC12V 1.5A Adapter x 1
IR Receiver Cable x 1
IR Emitter Cable x 1
Mounting Screw pack x 2
Trouble Shooting
1. The wiring must away from any equipment with electromagnetic wave, i.e.: mobile phone, microwave,
radio equipment, fluorescent lamp, high voltage power lines.
2 Under HDMI 2.0 mode, must use Premium certified HDMI cable.
3. Under HDCP 2.2 mode: any one monitor HDCP authorization failed will cause no video status, other
connecting monitors will be also failed. Then monitor testing must be one by one to find which monitor
HDCP failed.
GREEN
LINK
ON: HDBaseT Linking
BLUE
N/A
Reversed
RED
FW UP
ON: Firmware Update
Color
Status
HE02EIXT
HE02EIXR
GREEN
ON
ON: Power normal
BLUE
IR RX
ON: Receiving IR signal
RED
IR TX
ON: Sending IR signal

4
User Manual
HE02EIXP
4. This device HDBaseT port is not general Ethernet signal; do not connect with Network devices to avoid
damage.
5. IR transmitter do not put near from receiver to avoid mutual interference.
Specification
ITEM NO.
HE02EIXPT
HE02EIXPR
Support
Compliance
HDMI 2.0, HDCP 2.2, 1.4, DVI
Max. Video Resolution
4K@60Hz 4:4:4
Max. Transmission Distance
70M at 1080p@60Hz, 40M at 4K@60Hz 4:4:4
Video Bandwidth
10.2 Gbps
Audio Format
LPCM 7.1 192KHz, Dolby Trued, DTS-HD MA
IR Support
30-60Khz, ±15°, 5M, Bi-directional
30-60Khz, ±55°, 5M,
Bi-directional
RS232 Baud Rate
115200 bps/ Full Duplex
Ports & Interfaces
Video Input
1 x HDMI Type A
1 x HDBaseT
Video Output
1 x HDBaseT
1 x HDMI Type A
RS232 Interface
1 x DB9 Female
1 x DB9 Male
IR Interface
1 x 3.5mm Phone Jack
1 x 3.5mm Phone Jack
Power
Power Supply
DC 24V 1.5A
DC 24V 1.5A
Power Consumption
5.4W
7.32W
Ambient Temperature
Operation
0 to 55℃
Storage
-20 to 85℃
Humidity
up to 90%
Physical Characteristics
Dimensions
109.6 x 109.5 x 30mm
109.6 x 109.5 x 30mm
Weight
260g
275g