SC&T DP02U-4K6G User manual

Smart Cabling & Transmission Corp. V1.0
V1.0
DisplayPort Extender Series
User Manual
Model : DP02U-4K6G
4K 60Hz DisplayPort KVM Extender with USB 2.0

1
User Manual
DP02U-4K6G
Overview
DP02U-4K6G is a DisplayPort over HDBaseT KVM Extender which is able to send uncompressed video,
digital & analog audio, RS232, and USB signals, with resolution up to 4096/ 3840 x2160 @60Hz 4:4:4 and
transmission distance up to 100M. It uses the Valens Stello VS3000 chipset, which is the only solution for
long-range distribution of uncompressed video, with zero latency. The 4 built-in USB ports at the RX unit
can connect multiple USB 2.0 devices, such as keyboards, mouses, flash drives, USB cameras, and touch
panels.
Features
Resolution up to 4096/ 3840 x2160@60Hz 4:4:4.
HDBaseT for transmission of uncompressed UHD video at almost zero latency.
Signal extension up to 100m for 4096 x 2160@60Hz.
Built-in 4 ports USB2.0 at the RX unit for USB cameras, flash drives, keyboards/mouses, etc.
Supports bi-directional RS232 transmission.
Supports DisplayPort audio and 3.5mm input/output at Tx or Rx. (For more information, see the Audio
Transmission, P5.)
HDCP compliant.
Installation View

2
User Manual
DP02U-4K6G
Panel View
DP02UT-4K6G (Transmitter)
No
Interface
Description
1
Power Input
To input 12V 1.5A power
2
USB Micro-B
Firmware Upgrade
3
3.5mm Jack RS232
RS232 for control signals extension
4
HDBaseT Output
To connect a CAT6A for transmission up to 100M
5
DisplayPort Input
Video Input up to 4096*2160@60Hz
6
3.5mm Jack Audio Output
Analog audio line out
7
3.5mm Jack Audio Input
Analog audio line in
8
USB Type-B
USB2.0 for host connection
9
Link LED Indicator
LED for visual link indicator
10
Activity LED Indicator
LED for visual data transfer indicator
11
Power LED Indicator
LED for visual power indicator

3
User Manual
DP02U-4K6G
DP02UR-4K6G (Receiver)
No
Interface
Description
1
Power Input
To input 12V 1.5A power
2
USB Micro-B
Firmware Upgrade
3
3.5mm Jack RS232
RS232 for control signals extension
4
HDBaseT Input
To connect a CAT6A for transmission up to 100M
5
DisplayPort Output
Video Output up to 4096 x 2160@60Hz
6
3.5mm Jack Audio Output
Analog audio line out
7
3.5mm Jack Audio Input
Analog audio line in
8
USB Type-A
USB2.0 for device connection
9
Link LED Indicator
LED for visual link indicator
10
Activity LED Indicator
LED for visual data transfer indicator
11
Power LED Indicator
LED for visual power indicator

4
User Manual
DP02U-4K6G
LED Indication
LED
LED Light
Status
ON
Green/Off
Power on/off
LINK
Blue/Off
Connected/Disconnected
Resolution and Distance
Resolution
DP02U-4K6G transmits Displayport KVM and USB2.0 signals at up to 4096/ 3840 x2160@60Hz resolution and
can extend the distance for a maximum of 100m at a lower resolution. For the detailed transmission
distances, see the next chapter.
Transmission Distance
Table of Distance
At 4096x2160@60Hz 4:4:4, using an HDBaseT 3 certified CAT6A cable can extend the signal for 100m and a
COMMSCOPE CAT6A cable for 80m, after tests. See the table below for information about the transmission
distance.
Cable Type
Maximum Distance
Resolution
CAT6A (HDBaseT3 Certified)
100m
4096/ 3840 x2160 60Hz
CAT6A (COMMSCOPE)
100m
4096/ 3840 x2160 30Hz
1920x1080 60Hz
80m
4096/ 3840 x2160 60Hz
CAT5e
40m
4096/ 3840 x2160 30Hz
1920x1080 60Hz

5
User Manual
DP02U-4K6G
Setting up
Wall socket
If the Ethernet cable passes through the wall socket, the length of the cable between DP02U and Wall Jack
must be fewer than 3 meters as connection diagram shown below:
Cable used
We recommend using high-quality CAT6, CAT6a, CAT7 UTP/STP, or FTP cables to connect DP02UT-4K6G and
DP02UR-4K6G. Poor quality cables and any improper connection will cause video or audio disruptions and
picture noise.
Audio Transmission
DP Audio
DP02U-4K6G transmits DP audio. DP audio input can only be played from DP output.
Sound Channel
DP02U-4K6G has an independent 3.5mm sound channel at the transmitter and receiver, which can be
connected to a microphone or speaker. Tx 3.5mm audio input can only be played at Rx output. Rx 3.5mm
audio input can only be played at Tx output.
Independent 3.5mm sound channel which can be connected to a microphone or speaker at either Tx or
Rx.

6
User Manual
DP02U-4K6G
RS232 Transmission
DP02U-4K6G supports RS232 transmission via a 3.5mm connector. If your RS232 device uses a DB9
connector, you will need a DB9 to 3.5mm adapter cable to connect the device to Tx and Rx.
RS232 Definition
DP02U-4K6G has 3.5mm for RS232 transmission. See the pictures and tables below for detailed
connections.
RS232(DB9 Female)
3.5 mm Phone Jack
Pin
Definition
Pin
Definition
Pin 2
TX
Pin 1
RX
Pin 3
RX
Pin 2
TX
Pin 5
GND
Pin 3
GND
RS232(DB9 Male)
3.5 mm Phone Jack
Pin
Definition
Pin
Definition
Pin 2
RX
Pin 1
RX
Pin 3
TX
Pin 2
TX
Pin 5
GND
Pin 3
GND

7
User Manual
DP02U-4K6G
Caution
Using a certified Premium HDMI cable to transfer high-resolution video is recommended.
Using a certified HDBaseT3 CAT6A U/FTP cable to transmit up to 100m is needed.
The maximum power provided from each USB port is 500mA, and the total maximum power from
the 4 ports is approximately 1700mA. It can also work with a DC5V 3000mA adapter to increase the
total maximum power to 2000mA.
This product is designed for indoor applications. If it is desired for outdoor use, please install
additional equipment for waterproof protection and surge protectors to prevent damage caused
by lighting.
Do not put anything on the power and system cables. Place them where they cannot be stepped
on. Please be sure there is nothing resting on any cables.
Avoid using this product close to water places, or near high-temperature devices such as
radiators, stoves, etc.
Shut down the power supply and unplug all equipment immediately if:
oWater or any kind of liquid has been spilled into the product.
oThe temperature is too high.
oThe product has been damaged by an external force.
oThe product does not operate normally as this manual indicates.
Please contact us for further repair if the above conditions happen.
Package Includes
Item
Amount
DP02UT-4K6G (Transmitter Unit)
1 pc
DP02UR-4K6G (Receiver Unit)
1 pc
DC5V 1.5A Power Adapter
2 pcs
USB A/B Cable
1 pc
Mounting Screw pack
1 bag

8
User Manual
DP02U-4K6G
Specification
Model
DP02UT-4K6G
DP02UR-4K6G
Compliance
Standard
DP1.2
HDCP1.3
USB2.0
Video Resolution
4K@60Hz 4:4:4
Transmission Distance
100M (HDBaseT3 certified CAT6a U/FTP cable)
RS232 Baud Rate
115200 bps/Full Duplex
Ports & Interfaces
Video Input
1 x DisplayPort
1 x HDBaseT
Video Output
1 x HDBaseT
1 x DisplayPort
Audio Input
1 x (3.5mm) Phone Jack
1 x (3.5mm) Phone Jack
Audio Output
1 x (3.5mm) Phone Jack
1 x (3.5mm) Phone Jack
USB Connector
1 x USB Type-B
4 x USB Type-A
RS232
1 x (3.5mm) Phone Jack
1 x (3.5mm) Phone Jack
Console (Firmware Upgrade)
1 x USB Micro-B
1 x USB Micro-B
LED Indicators
3-LED Status:
PWR / HDBaseT Link / HDBaseT
Activity
3-LED Status:
PWR / HDBaseT Link / HDBaseT Activity
Power
Power Supply
12V 1.5A
12V 1.5A
Power Consumption
<10W
<10W
Ambient Temperature
Operation
-20 to 70°C
Storage
-40 to 85°C
Operating Altitude
2000m
Humidity
Up to 95%
Physical Characteristics
Dimension
122 x 124 x 32mm
122 x 124 x 32mm
Weight
340g
355g

9
User Manual
DP02U-4K6G
Installation Guide
Accessory
A
Machine Screw
B
Self-drilling Screw
C
Screw Plug
D
Angle Bracket
E
1U Rack
Installed on a Platform
Step 1 Use machine screws to fix angle brackets on both sides of your product