SC&T HE03 User manual

Smart Cabling & Transmission Corp.
HDMI over IP Extender
User Manual
Model : HE03
HDMI CAT5e Extender with HDMI Loop Out 150M

1
User Manual
HE03
Introduction
HE03 is an HDMI extender that can use a cost-effective Ethernet cable to send HDMI signal for up to 150M
with resolution up to 1080p@60Hz. Its TX unit has a loop out port that can connect an extra HDMI display.
The extender applies AV over IP technology, which can work with Ethernet switches to split an HDMI signal
into multiple ones.
Features
Resolution up to 1080p@60Hz.
Signal extension up to 150M over CAT5e (or greater) cable.
Built-in local loop-out port for an extra HDMI display at TX side.
Workable with Ethernet switches for point to many HDMI transmission.
Workable with SR01X (IP repeater) for longer distance.
Installation view
Optional Model: SR01 Signal Repeater (order separately)
Extend data signal for an additional 120meters.
Application for HE03T signals for extra-long range transmission.
Ability to cascade connection with multiple SR01 for long range transmission
Built in LED status indication.
External power required.
Plug and play for easy installation.
Work with HE03 CAT5e Extender

2
User Manual
HE03
Economic HDMI over IP Extender, support point to many connections via network
switch
LED Indication
Power
GREEN
on (power)
Link
BLUE
on (linking)
Flash
(low-power mode)
Panel View
1. Transmitter
2. Receiver
LED Indication Status
Green LED: ON Power on
RJ45 LED: Orange Flash (Data transmission)
Green on (linking)
Cable
Link Cable use high quality Cat.5e UTP/STP/FTP or Cat.6 UTP cable

3
User Manual
HE03
RJ45 Define
Link Cable (TIA/EIA-568-B)
1. Orange-white Data 1 +
2. Orange Data 1 -
3. Green-white Data 2 +
4. Blue Data 3 +
5. Blue-white Data 3 -
6. Green Data 2 -
7. Brown-white Data 4 +
8. Brown Data 4 -
Computer IP Address Setting
System default IP address is 192.168.168.55 for HE03T, 192.168.168.56 for HE03R (subnet mask 255.255.255.0),
Your computer must set in same subnet mask to enter the web setup page.
To change the IP address of computer please follow below step: (based on Windows XP):
Right click on “My Network Place” “Properties” then right click on “Local Area Connection” “Properties”
then double click on “Internet Protocol (TCP/IP)” to setting as below:
(IP address 192.168.168.1, sub mask 255.255.255.0)
Login in to the web
Use CAT5e cable to connect transmitter/receiver RJ45 port to PC LAN port, enter the IP address of TX/RX in
the web browser.
After login to the web, click System Settings you can change IP address, Subnet Mask, MAC address at
System page, then click Apply to finish setting.

4
User Manual
HE03
Specification
ITEM NO.
HE03T
HE03R
Support
Compliance
HDMI 1.3b, HDCP
Max. Video Resolution
1080p@60Hz
Max. Transmission Distance
150M over CAT5e, 160M over CAT6 cable
Ports & Interfaces
Video Input
1 x HDMI Type A
1 x RJ45
Video Output
1 x RJ45
1 x HDMI Type A
Video Loop-out
1 x HDMI Type A
Power
Power Supply
DC 5V 2A
DC 5V 2A
Power Consumption
1200mA
700mA
Ambient Temperature
Operation
-20 to 60℃
Storage
-20 to 85℃
Humidity
up to 95%
Physical Characteristics
Dimensions
67 x 170 x 27mm
67 x 130 x 27mm
Weight
250g
195g