
Adjustment:
EQ : Cable length EQ adjustment for picture sharpness, clockwise turning to enhance
signal, counter-clockwise to lower signal.
Gain: Video signal gain adjustment for picture brightness, clockwise turning to enhance
signal, counter-clockwise to lower signal.
Skew Select ←→: Press ←→2 buttons together to start the Skew adjustment mode.
Under skew adjustment mode: Press ←→2 buttons together again
to switch the color (RGB) you want to adjust.
Skew Select ←: reduce delay time (color move to left side)
Skew Select →: increase delay time (color move to right side)
Note: 1. Under Skew adjustment mode without any setting in 30 seconds,
it will be auto off skew adjustment mode.
2. EQ, Gain, Skew adjustment also influence the picture quality of Loop Out.
LED Indication:
Blue LED: Power on/off
Vertical 3 x LED: Under skew adjustment mode, to indicate the color you adjust
R = Red, G = Green, B = Blue.
Link Cable Connector:
Green LED: Audio signal lock (LED on)
Caution:
The cabling must away from any equipment with electromagnetic wave, i.e.: microwave,
radio equipment, high voltage lines.
Specification:
3.5mm Stereo Phone jack x 1
Coaxial RCA x 1 (75Ω),Optical x 1
Rev. B