Sceptre SE4200 User manual

- 1-
www.SCEPTRE.com
SCEPTRE SE4200 Series User Manual
Dear Sceptre Customer,
Congratulations on your new SCEPTRE SE4200 series wireless microphone
mixer purchase. Thank you for your support. To ensure safety and many
years of trouble free operation of your product, please read the manual
carefully before making any adjustments, and keep them in a safe place for
future references. We hope you enjoy your new SCEPTRE SE4200.
For technical assistance, please call 1800-788-2878 and select option 3 or
email our tech support group at [e-mail].
For all other inquiries, please call 1800-788-2878 and select option 4 or
email our customer service group at [email protected]m.
Live Chat also available during business hours M-F 8:30AM-5:30PM (PST).
We recommend you register your SCEPTRE product at our online website
http://www.sceptre.com/registration.html.

- 2-
www.SCEPTRE.com
SCEPTRE SE4200 Series User Manual
IMPORTANT INFORMATION
SAFETY INSTRUCTIONS
Electricity is used to perform many useful functions, but it can also cause
personal injuries and property damage if improperly handled. This product
has been engineered and manufactured with the highest priority on safety.
However, improper use can result in electric shock and / or fire. In order to
prevent potential danger, please observe the following instructions when
installing, operating and cleaning the product. To ensure your safety and
prolong the service life of your product, please read the following precautions
carefully before using the product.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.

- 3-
www.SCEPTRE.com
SCEPTRE SE4200 Series User Manual
9. Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The
wide blade and the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at
the plugs, convenience receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury from
tip-over.
13. Unplug this apparatus during lightening storms or when unused for long
periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.

- 4-
www.SCEPTRE.com
SCEPTRE SE4200 Series User Manual
Package Contents
For SE4200
Audio Central Unit x 1
AC Adapter x 1
3.5mm Audio Cable x 1
6.5mm Audio Cable x 1
Mini-USB to USB Cable x 1
User Manual x 1
For SE4210
Audio Central Unit x 1
Wireless Microphone x 1
AC Adapter x1
3.5mm Audio Cable x 1
6.5mm Audio Cable x 1
Mini-USB to USB Cable x 1
User Manual x 1
For SE4220
Audio Central Unit x 1
Wireless Microphone x 2
AC Adapter x 1
3.5mm Audio Cable x 1
6.5mm Audio Cable x 1
Mini-USB to USB Cable x 1
User Manual x 1
Features
•2.4 GHz technology for wireless microphone with extreme energy saving. 2 x
AA batteries last up to 30 hours.
•Volume adjuster built into wireless microphone for ease of use and
convenience.
•Audio central unit comes built in with voice echo for people who would like to
use the unit for Karaoke.
•Audio central unit down mixes microphone voice and background music
automatically.

- 5-
www.SCEPTRE.com
SCEPTRE SE4200 Series User Manual
Audio Central Unit
Front View
1. POWER BUTTON – This button turns on the audio central unit. Press and
hold for 2 seconds to turn on the receiver. Press and hold for 2 seconds to
turn off the receiver.
2. POWER INDICATOR LIGHT – The light turns green when the audio central
unit is turned on and red when the audio central unit is turned off.
3. PAIRING BUTTON 1 – This button is used to match the audio central unit
with the wireless microphones. Press the match button on the microphone
first then press the button on the audio central unit in order to link up.
4. PAIRING BUTTON 2 – This button is used to match the audio central unit
with the wireless microphones. Press the match button on the microphone
first then press the button on the audio central unit in order to link up.

- 6-
www.SCEPTRE.com
SCEPTRE SE4200 Series User Manual
Rear View
1. DC IN – This connection is used for connecting the power supply (AC
adapter).
2. MINI USB – Connect to a PC in order to switch between previous page and
next page from the wireless microphone’s built in buttons.
3. MIC OUT (6.5mm mini-jack) – Connect to a mixer or power amplifier for
speaker output.
4. ECHO – This knob controls the level of echo effects. Turn the knob to
increase or decrease the echo effect.
5. LINE IN (3.5mm mini-jack) – Connect your music output into this port with a
3.5mm mini-jack in order to mix in the microphone voice with the music.
6. LINE OUT (3.5mm mini-jack) – Use a 3.5mm mini-jack to connect this port to
an amplified receiver or self-powered speaker to output the down mixed
microphone voice and music.

- 7-
www.SCEPTRE.com
SCEPTRE SE4200 Series User Manual
Wireless Microphone
1. MICROPHONE HEAD – This location picks up any voice close to it and sends the signal to the
audio central unit for output.
2. VOLUME STATUS LIGHT – This light shows you the level of the microphone volume.
3. + / – / ◄/►BUTTONS – (+/–) increases or decreases the microphone volume. ◄/►
buttons let the user use the page up and page down function when the audio central unit is
connected to a computer via USB cable.
4. POWER INDICATOR LIGHT – This light turns green when the microphone is powered on.
This light turns red when you need to replace the batteries.
5. POWER SWITCH – Switch up to turn on the microphone and down to turn off the microphone.

- 8-
www.SCEPTRE.com
SCEPTRE SE4200 Series User Manual
Installing Batteries to the Remote Control
1. Twist the bottom of the microphone counter clockwise in order to remove the shell.
2. Insert 2 x AA batteries. Be sure to match the (+) and (-) symbols when you insert the
batteries.
3. Install the bottom shell again and twist clockwise to tighten the shell to the body of the
microphone.
Please note:
•Only use AA batteries.
•Do not mix new and old batteries. This may result in cracking or leakage that may
pose a fire risk or lead to personal injury.
•Inserting the batteries incorrectly may also result in cracking or leakage that may
pose a fire risk or lead to personal injury.
•Dispose the batteries in accordance with local laws and regulations.
•Keep the batteries away from children and pets.
•If the microphone is not used for a long time, remove the batteries.
•Keep the microphone away from moisture, sunlight, and high temperatures.

- 9-
www.SCEPTRE.com
SCEPTRE SE4200 Series User Manual
Connection Suggestion
Below is a connection suggestion chart utilizing a Sceptre TV outputting music from the
TV to the audio central unit using a 3.5mm mini-jack cable. The audio central unit is
already paired with the microphones. The audio central unit is also connected to a
Sceptre self powered speaker sound bar for audio output. The user can use the
wireless microphones to sing along with the TV music.

- 10 -
www.SCEPTRE.com
SCEPTRE SE4200 Series User Manual
Installation / Operation
The audio central unit and the wireless microphones need to be setup in order for them to work
properly.
CONNECTING POWER TO THE AUDIO CENTRAL UNIT
1. From the package contents, obtain the AC adapter. Connect the plug end into a surge
protector or a wall socket.
2. Connect the other end (round plug) into the back of the audio central unit labeled DC IN.
3. The indicator light should be lit up red if there is power going to the unit.
PAIRING THE WIRELESS MICROPHONES TO THE AUDIO CENTRAL UNIT
1. If you have the SE4210 or SE4220, the microphones should be already paired
automatically to the unit.
2. If the microphones are not paired already, please do the following. If you have the
SE4210 or SE4220, obtain the wireless microphone and insert the batteries.
3. Before you close up the battery cover look at the opposite side of where the batteries are
installed. There should be a red button there.
4. Press the red button once and see the power light flashing.
5. Press the PAIRING 1 or 2 light on the audio central unit to pair up the wireless
microphone.
CONNECTING TO A PC FOR PRESENTATION
1. Setup the audio central unit and the microphones according to the instructions above.
2. Connect a mini-USB to USB cable from the audio central unit to the PC.
3. Connect a 3.5mm mini-jack cable from the PC’s speaker out to the audio central unit’s
LINE IN.
4. Connect a 3.5mm mini-jack cable to a powered speaker and to the audio central unit’s
LINE OUT.
5. You can start you presentation!!
6. You can use the wireless microphone’s left and right button to page up or page
down your presentation slides.
CONNECTING TO A TV FOR KARAOKE
1. Setup the audio central unit and the microphones according to the instructions above.
2. Connect a 3.5mm mini-jack cable from the TV’s headphone out to the audio central unit’s
LINE IN.
3. Connect a 3.5mm mini-jack cable to a powered speaker or audio receiver and to the
audio central unit’s LINE OUT.
4. Time to Karaoke!!
5. You can use the echo knob to turn your voice echo up or down.