schwankgroup.com/schwankair
3 Electrical heat - [IP20]
Model Output
[kW]
Airflow*1
[CFM]
Sound
power*2
[dB[A]]
Sound
Pressure
[dB[A]]
FLA [full load
amperage]*3
[A]
Motor
power
[W]
Amperage
motor
[A]
Voltage [V]
Amperage
[A] [heat]
Weight
[lb]
AC-TE36-20 4/7 1150 73 55 21 135 0.86 208V3~/19 57
AC-TE60-20 7/10 1600 72 54 29 147 0.94 208V3~/28 82
AC-TE72-20 8/13 2250 75 57 39 270 1.71 208V3~/36 112
AC-TE36-48 4/8 1150 73 55 11 135 0.86 480V3~/10 57
AC-TE60-48 6/12 1600 72 54 16 147 0.94 480V3~/15 82
AC-TE72-48 8/16 2250 75 57 21 270 1.71 480V3~/20 112
AC-TE36-60 4/8 1150 73 55 9 135 0.86 600V3~/8 57
AC-TE60-60 6/12 1600 72 54 13 147 0.94 600V3~/12 82
AC-TE72-60 8/16 2250 75 57 17 270 1.71 600V3~/16 112
1 Ambient, no heat - [IP21]
Model Output
[MBH]
Airflow*1
[CFM]
Sound power*2
[dB[A]]
Sound Pressure
[dB[A]]
Motor
power [W]
Voltage
motor [V]
Amperage
motor [A]
Weight [lb]
AC-TA36-23 0 1150 73 55 135 208V~ 0.86 49
AC-TA60-23 0 1600 72 54 147 208V~ 0.94 71
AC-TA72-23 0 2250 75 57 270 208V~ 0.72 93
Model Output*4
[MBH]
Airflow*1
[CFM]
Sound
power*2
[dB[A]]
Sound
Pressure
[dB[A]]
Motor
power
[W]
Voltage
motor
[V]
Amperage
motor
[A]
Water
volume
[US gal]
Weight
[lb]
AC-TW36-23 27 1050 72 54 109 208V~ 0.71 0.34 57
AC-TW60-23 48 1550 72 54 135 208V~ 0.86 0.55 79
AC-TW72-23 65 2150 74 56 218 208V~ 1.42 0.71 106
2 Water heat - [IP21]
1. Highest airow at 3 fan speed.
2. Values shown are for total sound power levels for Installation Type A: free inlet, free outlet.
3. The Sound power level ratings shown are in decibels, referred to 10-12 watts, calculated per AMCA
Standard 301.
4. FLA: total amperage for motor and heat.
5. Applicable at water temperature 140/104F, air temperature, in +64F.
Above table is valid for 208V/1ph/60Hz. Also approved for 230V/1ph/60Hz. Product performance for
230V/1ph/60Hz will differ from stated data.
Protection class for units with electrical heating: [TE] IP20.
Protection class for units without electric heating and units with water heating: [TW] IP21.
The air curtains shown herein are licensed to bear the AMCA Seal. The ratings shown are based on tests and
procedures performed in accordance with AMCA Publication 211 and AMCA Publication 311 and comply
with the requirements of the AMCA Certied Ratings Program. The AMCA Certied Ratings Seal applies to
airow rate, average outlet velocity, outlet velocity uniformity, velocity projection and power rating at free
delivery only.
Technical Specification
