AREA DISPLAYED ON SCREEN
The image displayed on the screen is an approximation only.
INFORMATION
The area displayed on the screen may vary
according to vehicle orientation or road
conditions.
The area detected by the camera is
limited. The camera does not detect
objects which are close to either corner
of the bumper or under the bumper.
CAUTION
The image on the screen is different from actual conditions. Depicted distances between
objects and flat surfaces will differ from actual distance. If you back up looking only at
the screen monitor, you may hit an object, vehicle or person.
Use your own eyes to confirm the vehicle’s surroundings, as the displayed image may
become faint or dark, and moving images will be distorted or not entirely visible when
the outside temperature is low.
Refer to Scion.com to download the Owner‘s Manual for more details on this system.
The back up camera is located as shown in the illustration.
BACK UP CAMERA
*Smear effect
A phenomenon that occurs when a bright light (for example, sunlight reflected off
the vehicle body) is picked up by the camera; when transmitted by the camera,
the light source appears to have a vertical streak above and below it.
INFORMATION
If a bright light (for example, sunlight reflected off the vehicle body) is picked up
by the camera, a Smear effect* may occur.
INFORMATION
The camera uses a special lens. The distance of the image that appears on the
screen differs from the actual distance.
When the camera is used under fluorescent lights, sodium lights or mercury lights
etc., the lights and the illuminated areas may appear to flicker.
In the following cases, it may become difficult to see the images on the screen,
even when the system is functioning:
• In the dark (for example, at night)
• When the temperature near the lens is high or low
• When water droplets are adhering to the camera, or when humidity is
high (for example, when it rains)
• When foreign matter (for example, snow or mud) is adhering to the camera
• When the camera has scratches or dirt on it
• When the sun or the beam of headlights is shining directly into the camera
lens
The back up camera is located near the license plate. To adjust the image on the
rear view monitor screen, press the setup button “ ” on the left side of screen
and select “Display” on the setup screen. Then select “Camera” to adjust the
screen brightness and contrast.
INFORMATION
If the camera lens becomes dirty, it cannot transmit a clear image. If water
droplets, snow or mud adhere to the lens rinse with water and wipe with a soft
clean cloth. If the lens is extremely dirty, wash it with a mild cleaner and rinse
immediately.
22016 FR-S Back Up Camera 2016 FR-S Back Up Camera 3
FEATURES/OPERATIONS
