SCRIPTCAST Pro QuattroPod User manual

SCRIPTCAST Pro
QuattroPod User Manual
Screen share on Smartphones / Tablets / Laptops

SCRIPTCAST Pro
QuattroPod
Our SCRIPTCAST QuattroPod system
is the most innovative solution
for conference rooms, enhancing
collaboration by sharing screens
wirelessly!
QuattroPod is fully compatible with
Windows/Mac/Chromebooks and
iOS/Android mobile phones and
tablets. It also supports 4K resolution
for the best visual experience.
What’s in the box?
QuattroPod Receiver 2x QuattroPod Launchers
Hardware Installation
HDMI A to A Mini DP A to A
1x 1m 2x 30cm 2x 30cm
5V Universal Adapter
1Connect to the TV
Plug the QuattroPod Receiver to the
TV using the HDMI cable
2Connect power adapter
Plug the QuattroPod Receiver to the power
adapter using the USB power cable
3Connect to LAN
Plug your Internet cable to the back of the
QuattroPod Receiver
How to use your QuattroPod?
Laptop/PC
1Connect the launcher
Plug the QuattroPod Launcher to your laptop/PC using the HDMI or Mini DP cable
provided in the box
2Power the launcher
Connect the launcher to your laptop/PC using the USB cable at the bottom of the
launcher to power it. You can also plug the USB in an external power source
3Click & Share
Click the main button once to connect to the QuattroPod.
The rst device to connect to the QuattroPod is automatically assigned as a host

Apple iOS
1Connect the launcher
Plug the QuattroPod Launcher to your Apple mobile device using a USB cable and
switch the launcher to ‘Mobile’ mode from the button located next to the USB port
2Powert the launcher
Connect the launcher to an external power source, a laptop/PC, a portable battery or
other power source using the USB cable at the bottom of the launcher
3Click & Share
Click the main button once to connect to the QuattroPod. Conrm your choise in the
pop-up. The rst device to connect to the QuattroPod is assigned as a host
Android OS
1Enable USB debug before using
a) Go to Settings > About Phone > Software Information > click ‘Build Number’ 7 times
to enable the developer options.
b) Go to Developer Options > USB Debugging > ON
2Connect the launcher
a) Plug the QuattroPod Launcher to your Android mobile device using a USB cable and
switch the launcher to ‘Mobile’ mode from the button located next to the USB port;
b) You may also download the QuattroPod app and connect wirelessly with your
Android device by pressing the ‘Connect to’ button and choosing the device.
3Power the launcher
Connect the launcher to an external power source, a laptop/PC, a portable battery or
other power source using the USB cable at the bottom of the launcher
4Click & Share
Click the main button once to connect to the QuattroPod. Conrm your choise in the
pop-up. The rst device to connect to the QuattroPod is assigned as a host

Launcher Guide
Main (Mirror) Button Host Guest
Mirror/Disconnect
Full screen mirror
Send mirror
request
Send full screen
mirror request
-
-
-
Guest
HostSide (Control) Button
Allow guest
to mirror
Deny request
Quit all displays
Single click
Click & hold for 3 seconds
Single click
Double click
Click & hold for 3 seconds
LED Indicators List
LED Status LED Indication
Enable Host without source input
Enable Host and sharing
Guest is on standby without sharing
Main LED blinking red - Guest is requesting to share and
is waiting for allowance
Enable guest and sharing
Main LED blinking white - Transmitter OTA completed
Enable guest wihtout source input
Small LED blinking green - Host received request for sharing
Host is on standby without sharing
Both LEDs blinking red:
a) Under connection
b) Pairing/Transitter OTA download and installation
c) Fail to connect (blinking for 1 minute or more)
Pairing completed
Main LED blinking red - Transmitter OTA failed

SCRIPTCAST
@2019 SCRIPTCAST, MDV Enterprise Ltd. All rights reserved.
253-255 Great Lister St, Birmingham B7 4BS
Phone: [phone]
E-mail: [email protected]