SeaLevel HUB7i User manual

Sealevel Systems, Inc.
Sealevel.com
Phone [phone]
User Manual
Item# HUB7i

©Sealevel Systems, Inc. HUB7i Manual 2
SL9178 05/2012
Safety Instructions........................................................................................................................................3
Electrostatic Discharges (ESD).................................................................................................................3
Grounding Methods .................................................................................................................................3
Introduction..................................................................................................................................................4
Features ....................................................................................................................................................4
Before You Get Started.................................................................................................................................5
Advisory Conventions..............................................................................................................................5
What’s Included........................................................................................................................................5
Optional Items..........................................................................................................................................6
Installation ....................................................................................................................................................7
Windows 98/ME/2000/XP/Vista/7™Operating Systems ......................................................................7
Linux Support...........................................................................................................................................7
Hardware Description ..................................................................................................................................8
Optical Isolation .......................................................................................................................................8
High-Retention Type B USB Connector ...................................................................................................8
Status LEDs...............................................................................................................................................8
Technical Specifications...............................................................................................................................9
Power Requirements ................................................................................................................................9
Dimensions ..............................................................................................................................................9
Weight.......................................................................................................................................................9
Environmental Specifications ..................................................................................................................9
Manufacturing ..........................................................................................................................................9
Appendix A –Troubleshooting .................................................................................................................10
Appendix B –How to Get Assistance ........................................................................................................11
Technical Support ..................................................................................................................................11
Appendix C –Silk Screen –HUB7i PCB......................................................................................................12
Appendix D –HUB7i Board Mounting Outline..........................................................................................13
Appendix E –Compliance Notices ............................................................................................................14
Federal Communications Commission Statement ...............................................................................14
EMC Directive Statement .......................................................................................................................14
Warranty......................................................................................................................................................15
Warranty Policy.......................................................................................................................................15
Non-Warranty Repair/Retest..................................................................................................................15
How to Obtain an RMA (Return Merchandise Authorization) ..............................................................15
Trademarks ............................................................................................................................................15

©Sealevel Systems, Inc. HUB7i Manual 3
SL9178 05/2012
Electrostatic Discharges (ESD)
A sudden electrostatic discharge can destroy sensitive components. Proper packaging and
earthing rules must therefore be observed. Always take the following precautions.
Transport boards and cards in electrostatically secure containers or bags.
Keep electrostatically sensitive components in their containers, until they arrive at an
electrostatically protected workplace.
Only touch electrostatically sensitive components when you are properly earthed.
Store electrostatically sensitive components in protective packaging or on anti-static
mats.
Grounding Methods
The following measures help to avoid electrostatic damages to the device:
Cover workstations with approved antistatic material. Always wear a wrist strap
connected to workplace as well as properly grounded tools and equipment.
Use antistatic mats, heel straps, or air ionizers for more protection.
Always handle electrostatically sensitive components by their edge or by their casing.
Avoid contact with pins, leads, or circuitry.
Turn off power and input signals before inserting and removing connectors or
connecting test equipment.
Keep work area free of non-conductive materials such as ordinary plastic assembly aids
and Styrofoam.
Use field service tools such as cutters, screwdrivers, and vacuum cleaners which are
conductive.
Always place drives and boards PCB-assembly-side down on the foam.

©Sealevel Systems, Inc. HUB7i Manual 4
SL9178 05/2012
Once associated only with desktop peripherals, USB I/O devices are now commonly found in
industrial and OEM applications. The voltage spikes, power surges, and ground loops that affect
traditional serial interfaces also affect USB devices. Sealevel’s HUB7i is an optically isolated USB
hub that connects up to seven USB peripherals and protects the host computer from voltages
up to 4000 VAC.
The HUB7i is powered by an industrial grade wall-mount power supply that provides up to 3000
VAC isolation. For medical and other specialized applications, an optional medical grade power
supply is available that increases the isolation to 4000 VAC, which offers the highest level of
protection available from any USB hub manufacturer.
Status LEDs on the HUB7i indicate external power, connection to the host, and fault conditions.
The hub is housed in a rugged plastic enclosure and is USB 1.1 compliant and USB 2.0
compatible. The HUB7i integrates a high-retention USB type "B" connector that prevents
accidental disconnection of the USB cable, while the seven type "A" connectors provide a full
500mA to each attached USB peripheral.
Features
Provides 3000 VAC isolation on upstream USB port
Optional 4000 VAC isolation (with optional medical grade power supply)
High-retention USB type “B” connector prevents accidental disconnection of the upstream
USB cable
Includes seven powered downstream USB ports with 500mA available per port
Status LEDs indicate external power, connection to host, and fault conditions
USB 1.1 compliant and 2.0 compatible
Housed in rugged, attractive plastic enclosure

©Sealevel Systems, Inc. HUB7i Manual 5
SL9178 05/2012
Advisory Conventions
Warning –The highest level of importance used to stress a condition where damage
could result to the product or the user could suffer serious injury.
Important –The middle level of importance used to highlight information that might
not seem obvious or a situation that could cause the product to fail.
Note –The lowest level of importance used to provide background information,
additional tips, or other non-critical facts that will not affect the use of the product.
What’s Included
The HUB7i is shipped with the following items. If any of these items is missing or damaged,
please contact Sealevel for replacement.
HUB7i –Sealevel 7-Port Isolated USB Hub
CA179 –72” USB ‘A’ to ‘B’ Device Cable
TR124 –Wall-mount AC power supply (5VDC @ 4A), locking DC connector
Sealevel Software CD –Manual Only

©Sealevel Systems, Inc. HUB7i Manual 6
SL9178 05/2012
Optional Items
Depending upon your application, you are likely to find one or more of the following items
useful with the HUB4PH. All items can be purchased from our website (www.sealevel.com) or by
calling [phone].
5VDC @ 4A Desktop Power Supply (Item# TR129)
For medical and other specialized applications, this medical grade
power supply increases the isolation to 4000 VAC, providing the highest
level of protection in the industry.
USB Type A to USB Type A, 3 Meter Extension Cable (Item# CA214)
The CA214 is a fully rated USB extension cable that adds three meters
to any existing USB cable (maximum 5 meters). The CA214 has a type A
male connector on one end and a type A female connector on the other
end.
USB Type A to USB Type B, 5 Meter Device Cable (Item# CA215)
The CA215 is a fully rated 5 meter device cable that connects USB
peripherals with a type B connector to the type A connector on a host
PC. This cable provides the maximum 5 meters (16 feet) for a USB
connection.

©Sealevel Systems, Inc. HUB7i Manual 7
SL9178 05/2012
Windows 98/ME/2000/XP/Vista/7™Operating Systems
1. The HUB7i is fully supported as a generic USB hub device in WINDOWS
98/ME/2000/XP/VISTA/7™operating systems and requires no separate driver. The
Sealevel Software CD is included only for distribution of the user manual and other
literature.
2. Simply connect the included wall-mount power supply to the HUB7i and then connect to
an AC outlet.
3. Using the included USB device cable, plug the HUB7i into an available USB port on your
host system.
4. The ‘Found New Hardware’ screen will appear and the hub will be automatically
recognized as a generic USB hub device.
5. The hub is ready to use when you see the screen ‘Your USB hub is installed and ready to
use.’
Windows NT is not USB aware and thus cannot support this device
Linux Support
USB devices are supported in Linux kernel v2.4 or better. Refer to the help files included with
your Linux distribution for specific instructions on adding generic USB hub devices.

©Sealevel Systems, Inc. HUB7i Manual 8
SL9178 05/2012
Optical Isolation
To protect the host computer from voltage spikes, power surges, and ground loops, the HUB7i
and the included wall-mount power supply provides 3000 VAC isolation on the upstream USB
port. With the optional medical grade power supply (Item# TR129), the isolation is increased to
4000 VAC. Power is supplied to the hub via 2.1mm barrel connector on the rear of the device.
High-Retention Type B USB Connector
The upstream port integrates a high-retention type B connector that prevents accidental
disconnection of the USB cable. Seven powered downstream USB ports provide 500mA per port.
Status LEDs
Status LEDs are also included on the front of all SeaI/O modules to indicate the following
information:
ENABLE (Yellow) –Indicates that the hub is successfully communicating with the host
computer.
FAULT (Red) –Lights when there is a problem with a downstream USB port. Disconnect
the USB peripherals from the hub one at a time until the issue is isolated.
EXT PWR (Green) –Indicates that the hub is properly connected to an external power
source.

©Sealevel Systems, Inc. HUB7i Manual 9
SL9178 05/2012
Power Requirements
Power is supplied to the hub via a locking 2.1mm barrel connector on the rear of the device.
+5VDC @ 4A (3000 VAC Isolation)
+5VDC @ 4A (4000 VAC Isolation)
4000 VAC isolation with optional medical grade power supply (Item# TR129)
Dimensions
Length
Width
Height
9.2”
5.3”
1.7”
23.32cm
13.34cm
4.25cm
Weight
0.8 lbs./0.4 kg
Environmental Specifications
Specification
Operating
Storage
Temperature Range
0°C –70°C
(32°F –158°F)
-50°C –105°C
(-58°F –221°F)
Humidity Range
10 to 90% R.H.
Non-Condensing
10 to 90% R.H.
Non-Condensing
Manufacturing
All Sealevel Printed Circuit boards are built to UL 94V0 rating and are 100% electrically tested.
These printed circuit boards are solder mask over bare copper or solder mask over tin nickel.

©Sealevel Systems, Inc. HUB7i Manual 10
SL9178 05/2012
The HUB7i is a generic USB hub and should provide years of trouble-free service. Should the
device appear to not be functioning correctly, the following tips can eliminate most common
problems without the need to call Technical Support.
1. Make sure the power supply is connected to the hub and to a live AC power outlet. The
green LED on the front of the unit will light, indicating the hub is properly powered.
Inspect the power supply or call for a replacement if the green LED does not light after
connecting to power.
2. Make sure the hub is connected to a USB port using the included USB cable or a quality
replacement USB cable. The yellow LED will light when the hub is successfully
communicating with the host system.
3. The hub is supported in any USB aware operating system that supports generic USB hub
devices, including Windows 98/ME/2000/XP/Vista/7™operating systems and Linux
(kernel v2.4 or better). No additional drivers are required. Verify that USB support is
enabled in the host system BIOS and the hub is functioning properly in the operating
system. You can verify the hub is working properly in Windows using Device Manager.
4. If the red LED lights, there is a fault condition with one of the downstream USB ports.
Disconnect your USB peripherals one at a time until the red LED goes out. Inspect the
problem USB peripheral and replace, if necessary. Try connecting a different USB
peripheral to the problem port. If the red LED lights on the same USB port with a
different device, contact technical support for further assistance.

©Sealevel Systems, Inc. HUB7i Manual 11
SL9178 05/2012
When calling for technical assistance, please have the device installed and ready to run
diagnostics. If possible, have your user manual and current settings ready.
The Sealevel website is an excellent resource. The most current software updates
and user manuals are available via our homepage by clicking on the 'Drivers' or 'Manuals' links
located under ‘Technical Support.’ Manuals and software can also be downloaded from the
product page for your device.
The FAQ section of our website answers many common questions. Refer to this helpful resource
by visiting http://www.sealevel.com/faq.asp.
Technical Support
Monday –Friday
8:00 am to 5:00 pm EST
Phone: [phone]
Email: [e-mail]
Web: www.sealevel.com
RETURN AUTHORIZATION MUST BE OBTAINED FROM SEALEVEL SYSTEMS, INC. BEFORE
RETURNED MERCHANDISE WILL BE ACCEPTED. AUTHORIZATION CAN BE OBTAINED BY
CALLING SEALEVEL AND REQUESTING A RETURN MERCHANDISE AUTHORIZATION (RMA)
NUMBER.

©Sealevel Systems, Inc. HUB7i Manual 12
SL9178 05/2012

©Sealevel Systems, Inc. HUB7i Manual 13
SL9178 05/2012

©Sealevel Systems, Inc. HUB7i Manual 14
SL9178 05/2012
Federal Communications Commission Statement
FCC - This equipment has been tested and found to comply with the limits for Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in such case the user will be required to correct the interference
at the users expense.
EMC Directive Statement
Products bearing the CE label fulfill the requirements of the EMC directive
(89/336/EEC) and of the low-voltage directive (73/23/EEC) issued by the
European Commission.
To obey these directives, the following European standards must be met:
EN55022 Class A –“Limits and methods of measurement of radio
interference characteristics of information technology equipment”
EN55024 –“Information technology equipment Immunity characteristics
Limits and methods of measurement”.
EN60950 (IEC950) –“Safety of information technology equipment, including
electrical business equipment”
This is a Class A Product. In a domestic environment, this product may cause radio
interference in which case the user may be required to take adequate measures to
prevent or correct the interference.
Always use cabling provided with this product if possible. If no cable is provided or if an
alternate cable is required, use high quality shielded cabling to maintain compliance with
FCC/EMC directives.

©Sealevel Systems, Inc. HUB7i Manual 15
SL9178 05/2012
Sealevel's commitment to providing the best I/O solutions is reflected in the Lifetime Warranty
that is standard on all Sealevel manufactured I/O products. Relio™ industrial computers are
warranted for a period of two years and the R9 family is warranted for a five year period from
date of purchase. We are able to offer this warranty due to our control of manufacturing quality
and the historically high reliability of our products in the field. Sealevel products are designed
and manufactured at its Liberty, South Carolina facility, allowing direct control over product
development, production, burn-in and testing. Sealevel achieved ISO-9001:2000 certification in
2002.
Warranty Policy
Sealevel Systems, Inc. (hereafter "Sealevel") warrants that the Product shall conform to and
perform in accordance with published technical specifications and shall be free of defects in
materials and workmanship for the warranty period. In the event of failure, Sealevel will repair
or replace the product at Sealevel's sole discretion. Failures resulting from misapplication or
misuse of the Product, failure to adhere to any specifications or instructions, or failure resulting
from neglect, abuse, accidents, or acts of nature are not covered under this warranty.
Warranty service may be obtained by delivering the Product to Sealevel and providing proof of
purchase. Customer agrees to insure the Product or assume the risk of loss or damage in
transit, to prepay shipping charges to Sealevel, and to use the original shipping container or
equivalent. Warranty is valid only for original purchaser and is not transferable.
This warranty applies to Sealevel manufactured Product. Product purchased through Sealevel
but manufactured by a third party will retain the original manufacturer's warranty.
Non-Warranty Repair/Retest
Products returned due to damage or misuse and Products retested with no problem found are
subject to repair/retest charges. A purchase order or credit card number and authorization
must be provided in order to obtain an RMA (Return Merchandise Authorization) number prior
to returning Product.
How to Obtain an RMA (Return Merchandise Authorization)
If you need to return a product for warranty or non-warranty repair, you must first obtain an
RMA number. Please contact Sealevel Systems, Inc. Technical Support for assistance:
Available Monday –Friday, 8:00AM to 5:00PM EST
Phone [phone]
Email [e-mail]
Trademarks
Sealevel Systems, Incorporated acknowledges that all trademarks referenced in this manual are
the service mark, trademark, or registered trademark of the respective company.