Sealey CP20VPIW User manual

20V 1/2”SQ DRIVE BRUSHLESS IMPACT
WRENCH 700NM - BODY ONLY
MODEL NO: CP20VPIW
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURYAND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
1.1. GENERAL POWER TOOL SAFETY WARNINGS
WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock,
 reand/orseriousinjury.
9Save all warnings and instructions for future reference.
1.1.1. WORK AREA SAFETY
9Keep work area clean and well lit. Cluttered or dark areas invite accidents.
9Evaluateyourworkingareabeforeusingthetool;e.g.ceilings,oorsandenclosuresmaycontainelectricalitemsorwaterpiping.
8DO NOT operate power tools in explosive atmospheres, such as in the presence of ammableliquids,gasesordust.Powertools
create sparks which may ignite the dust or fumes.
9Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
1.1.2. PERSONAL SAFETY
9Stay alert, watch what you are doing and use common sense when operating a power tool. DO NOT use a power tool while you are
 tiredorundertheinuenceofdrugs,alcoholormedication.Amomentofinattentionwhileoperatingpowertoolsmayresultinserious
 personalinjury.
9 Usepersonalprotectiveequipment.Alwaysweareyeprotection.Protectiveequipmentsuchasdustmask,non-skidsafetyshoes,
 hardhat,orhearingprotectionusedforappropriateconditionswillreducepersonalinjuries.
9 Preventunintentionalstarting.Ensuretheswitchisintheo󰀨-positionbeforeconnectingtopowersourceand/orbatterypack,picking
up or carrying the tool.
9 Carryingpowertoolswithyourngerontheswitchorenergisingpowertoolsthathavetheswitchoninvitesaccidents.
9 Removeanyadjustingkeyorwrenchbeforeturningthepowertoolon.
8DO NOT overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected
situations.
9Dress properly. DO NOT wearlooseclothingorjewellery.Keepyourhair,clothingand gloves away from moving parts. Loose clothes,
 jewelleryorlonghaircanbecaughtinmovingparts.
9If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.
1.1.3. POWER TOOL USE AND CARE
8DO NOT forcethepowertool.Usethecorrectpowertoolforyourapplication.Thecorrectpowertoolwilldothejobbetterandsafer
at the rate for which it was designed.
8DO NOTusethepowertooliftheswitchdoesnotturnitonando󰀨.Anypowertoolthat cannot be controlled with the switch is
dangerous and must be repaired.
WARNING!Disconnecttheplugfromthepowersourceand/orthebatterypackfromthepowertoolbeforemakinganyadjustments,
changing accessories, or storing power tools.
9Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to
 operatethepowertool.Powertoolsaredangerousinthehandsofuntrainedusers.
9 Maintainpowertools.Checkformisalignmentorbindingofmovingparts,breakageofpartsandanyotherconditionthatmaya󰀨ect
the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained
power tools.
9Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions
 andtheworktobeperformed.Useofthepowertoolforoperationsdi󰀨erentfromthoseintendedcouldresultinahazardous 
situation.
1.1.4. SERVICE
9 Haveyourpowertoolservicedbyaqualiedrepairpersonusingonlyidenticalreplacement parts. This will ensure that the safety of
the power tool is maintained.
1.2. SPECIFIC IMPACT DRIVER SAFETY INSTRUCTIONS
8DO NOTholdunsecuredworkpieceinyourhand.Securelooseworkpieceswithaclamp,viceorotheradequateholdingdevice.
CP20VPIWIssue2(2,3)10/06/21
Original Language Version
© Jack Sealey Limited
Refer to
instructions Weareye protection Wearprotective gloves Wearear protection

2. INTRODUCTION
Powerful,lightweightcordlessimpactwrench.Durabledoubleinjectioncompositehousingwithsoftgripforaddedcomfort.Producestorqueof
upto700Nm.Brushlessmotor,whichgivesanimprovedperformanceandrequireslessmaintenancethanthebrushedequivalent,givingyoua
moree󰀩cient,longerlastingtool.Variablespeedtriggerswitchforeasycontrol.Forward,reverseandtrigger-lock.Fittedwithelectronicbrake.
Requirescompatible20Vbatteryandmainscharger,soldseparately.
3. SPECIFICATION
Model No...................................................................... CP20VPIW
Battery............................20V2Ah-6AhLithium-ion(notincluded)
Consumable parts:
CP20VBP2-2AhBattery,CP20VBP4-4AhBattery,
CP20VBP6-6AhBattery
Drive........................................................................... 1/2”SqDrive
Impact rate.................................................................... 0-3250bpm
Max.torque..........................................................................700Nm
Noisepower/pressure................................................. 94/105dB(A)
No-loadspeed ...............................................................0-2750rpm
Replacement parts.........CP20VMC-MainsCharger(notincluded)
Vibration/uncertainty ..................................................29.89/1.5m/s²
4. OPERATION
4.1. USING THE WRENCH
4.2.  Fitthesockettothewrenchbysnappingitontothesquaredrive.Note: Use only impact grade sockets.
4.3. Fit the battery pack to the wrench by aligning the tongue on the battery with the groove in the housing and slide into place.
 Ensurethatthebatterypackisrmlylocated,Aclickwillbeheardwhenithaslockedintoposition.
4.4.  Selecttherequireddirectionofrotation.Tochange direction, turnchange direction, turn thedirectioncontrol(g.1)totheleftorright.DO NOT attempt to
change the direction of rotation whilst trigger is depressed.
4.5.  SpeedcanbecontrolledbyselectingHighorLowbuttonsonbaseandbyvaryingthengerpressureonthetrigger.
Initial pressure will switch on the work light.
4.6.4.6.  Whentightening,takecarenottoover-torquesmallxi Whentightening,takecarenottoover-torquesmallxings.
  Note:Oncriticalfixingsalwayscheckthetorquewithatorquewrenchaccordingtotheproductorvehiclemanufacturer’sguidelines.
5. MAINTENANCE
WARNING:Alwaysdisconnectthebatterybeforecarryingoutanyinspection,maintenanceorcleaning.
5.1. GENERAL INSPECTION
5.1.1. Regularlycheckthatallthexingscrewsaretight.Repairsshouldbecarriedoutbyanauthorisedservicecentre. 
5.2. CLEANING
WARNING: Alwayswearprotectiveequipmentincludingeyeprotection
and gloves when cleaning this tool.
5.2.1. Keepyourtoolcleanatalltimes.Dirtanddustwillcauseinternalpartstowearquickly,andshortenthedevice’sservicelife.
5.2.2. Clean the body of your machine with a soft brush, or dry cloth.
5.2.3. Neverusecausticagentstocleanplasticparts.Ifdrycleaningisnotsu󰀩cient,amilddetergentonadampclothisrecommended.
5.2.4. Watermustnevercomeintocontactwiththetool.Ensurethetoolisthoroughlydrybeforeusingit. 
5.2.5. Ifavailable,useclean,dry,compressedairtoblowthroughtheventilationholes(whereapplicable).
5.3. LUBRICATION
5.3.1. Slightly lubricate all moving parts at regular intervals with a suitable spray lubricant.
5.4. STORAGE
5.4.1. Store this tool carefully in a secure, dry place out of the reach of children.
WARNING! – Risk of Hand Arm Vibration Injury.
This tool may cause Hand Arm Vibration Syndrome if its use is not managed adequately.
 ThistoolissubjecttothevibrationtestingsectionoftheMachineryDirective2006/42/EC.
This tool is to be operated in accordance with these instructions.
Measured vibration emission value (a): 29.890m/s²
Uncertainty value (k): 1.5m/s²
Please note that the application of the tool to a sole specialist task may produce a different average vibration emission. We recommend
that a specific evaluation of the vibration emission is conducted prior to commencing with a specialist task.
 Ahealthandsafetyassessmentbytheuser(oremployer)willneedtobecarriedouttodeterminethesuitabledurationofuseforeach
tool.
NB: StatedVibrationEmissionvaluesaretype-testvaluesandareintendedtobetypical.
 Whilstinuse,theactualvaluewillvaryconsiderablyfromanddependonmanyfactors.
Such factors include; the operator, the task and the inserted tool or consumable.
NB: ensure that the length of leader hoses is sufficient to allow unrestricted use, as this also helps to reduce vibration.
The state of maintenance of the tool itself is also an important factor, a poorly maintained tool will also increase the risk of Hand Arm
Vibration Syndrome.
Health surveillance.
 Werecommendaprogrammeofhealthsurveillancetodetectearlysymptomsofvibrationinjurysothatmanagementprocedures
can be modified accordingly.
Personal protective equipment.
 Wearenotawareofanypersonalprotectiveequipment(PPE)thatprovidesprotectionagainstvibrationinjurythatmayresultfromthe
 uncontrolleduseofthistool.Werecommendasufficientsupplyofclothing(includinggloves)toenabletheoperatortoremainwarm
and dry and maintain good blood circulation in fingers etc.
Original Language Version
© Jack Sealey Limited
g.1
CP20VPIWIssue2(2,3)10/06/21

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 01284 703534 [e-mail] www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycleunwantedmaterialsinsteadofdisposingofthemaswaste.Alltools,accessoriesandpackagingshouldbesorted,takento
arecyclingcentreanddisposedofinamannerwhichiscompatiblewiththeenvironment.Whentheproductbecomescompletely
unserviceableandrequiresdisposal,drainanyfluids(ifapplicable)intoapprovedcontainersanddisposeoftheproductandfluids
according to local regulations.
WEEE REGULATIONS
DisposeofthisproductattheendofitsworkinglifeincompliancewiththeEUDirectiveonWasteElectricalandElectronicEquipment
(WEEE).Whentheproductisnolongerrequired,itmustbedisposedofinanenvironmentallyprotectiveway.Contactyourlocalsolid
waste authority for recycling information.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty:Guaranteeis36monthslabourandtwoyearspartswarrantyfrompurchasedate,proofofwhichisrequiredforanyclaim.
Original Language Version
© Jack Sealey Limited CP20VPIWIssue2(2,3)10/06/21
 Pleasenotethatthemosteffectiveprotectionisprevention,pleaserefertotheCorrectUseandMaintenancesectioninthese 
 instructions.GuidancerelatingtothemanagementofhandarmvibrationcanbefoundontheHSEwebsitewww.hse.gov.uk-Hand-Arm
 VibrationatWork.