Seco SYS-C31-DMV Instructions for use
SYS-C31-DMV
Information subject to change. Please visit www.seco.com to find the latest version of this manual.
Page.1 of 23
1Preliminary information........................................................................................................................................3
1.1 Device description............................................................................................................................................3
1.2 Recipients ............................................................................................................................................................4
1.3 Warranty...............................................................................................................................................................4
2Identification.............................................................................................................................................................5
2.1 Manufacturer identification..........................................................................................................................5
2.2 Device identification........................................................................................................................................5
2.3 Device identification plate.............................................................................................................................5
3Technical specifications.........................................................................................................................................6
3.1 SYS-C31-DMV device hardware specifications....................................................................................6
3.2 Software Specifications ..................................................................................................................................7
3.3 Reference directives ........................................................................................................................................8
3.4 FCC Regulatory Notices.................................................................................................................................9
3.5 ISED Canada Regulatory Notices ............................................................................................................10
4Safety devices ........................................................................................................................................................ 11
4.1 Warnings...........................................................................................................................................................11
4.2 Safety pictograms affixed on the device and used in the manual.............................................13
5Characteristics and components of the device ........................................................................................14
5.1 Measurement layout....................................................................................................................................14
5.2 Components....................................................................................................................................................15
6Permitted environmental conditions............................................................................................................ 17
6.1 Transport and storage environmental conditions............................................................................17
6.2 Operating environmental conditions ....................................................................................................17
7Installation...............................................................................................................................................................19
SYS-C31-DMV
Information subject to change. Please visit www.seco.com to find the latest version of this manual.
Page.2 of 23
7.1 Installing the device......................................................................................................................................19
7.2 Installing the antenna..................................................................................................................................21
8Maintenance...........................................................................................................................................................23
9Waste disposal ......................................................................................................................................................23
SYS-C31-DMV
Information subject to change. Please visit www.seco.com to find the latest version of this manual.
Page.3 of 23
1Preliminary information
1.1 Device description
SYS-C31-DMV is a boxed PC based on SECO SC31-1121-B495-E2 single board computer
with a box designed for this specific application. Current system level part number is SYS-C31-
DMV-01-I0.
SYS-C31-DMV
Information subject to change. Please visit www.seco.com to find the latest version of this manual.
Page.4 of 23
1.2 Recipients
This manual is intended for ordinary people and installers (expert users).
1.3 Warranty
The warranty shall be voided in the event of:
•
failure to comply with safety regulations;
•
tampering with the device;
•
changes to the safety conditions established by the Manufacturer in the device
management software;
•
improper use of the device;
•
use of the device by untrained and/or unauthorized personnel or failure to respect
duties, as indicated in the manual;
•
changes or repairs carried out by the user without written authorization from the
Manufacturer;
•
partial or total failure to comply with the instructions;
•
defects in the mains power supply (electricity, power supply, etc.);
•
poor maintenance;
•
use of non-original spare parts;
•
exceptional events such as floods, fires (if not triggered by the device).
The complete warranty terms are set out in the sales contract.
Important! The user must read this manual before start with any kind of operation.
Important! The Manufacturer is not liable for improper use of the device.
SYS-C31-DMV
Information subject to change. Please visit www.seco.com to find the latest version of this manual.
Page.5 of 23
2Identification
2.1 Manufacturer identification
MANUFACTURER SECO S.P.A.
Via Achille Grandi n°20
52100 Arezzo –Italy
Address Tel: +39 0575 26979
Fax: +39 0575 350210
2.2 Device identification
Device
SYS-C31-DMV
Serial number
YYMMXXXXX
Year of manufacturing
2022
2.3 Device identification plate
The device is equipped with an identification plate located on the side. The plate features the
device identification information to be reported to Seco S.p.A. if necessary.
Caution! It is strictly forbidden to remove the identification plate and/or replace it
with other plates.
Caution! All operations that can make the labels applied on the device not visible /
accessible are strictly forbidden.
SYS-C31-DMV
Information subject to change. Please visit www.seco.com to find the latest version of this manual.
Page.6 of 23
3Technical specifications
3.1 SYS-C31-DMV device hardware specifications
The table below features the board hardware specifications:
Processor
CPU Rockchip RK3399K (2x Cortex-A72 + 4x Cortex-A53)
Mass Storage
2GB LPDDR4 RAM
16GB eMMC
RTC
Network connection
IEEE 802.11 ac/a/b/g/n WLAN
Bluetooth 5.0
LTE Cat 4 with internal LTE modem’s SIM holder
LTE 2nd antenna connector for DIVERSITY mode is available
(Don't connect anything here; it invalidate the certification)
RJ45 Ports x2 for Ethernet LAN connection
Peripherals to be
supported
USB2.0 (x3)
USB3.0
USB type-C
HDMI
RJ45 (x2)
RS232 on D-SUB DB9 MALE (x2)
Video
1x HDMI
1x DP (USB 3.0 Type-C alternate mode)
Operating System
Android 11
Type of installation
Fastening for integration use on industrial machine using
threaded pins directly on the mechanical plate.
Power Supply
Nominal: 12 VDC with 2,5mm jack with lock
Battery model
CR2032 (internal battery not replaceable)
Operating
temperature in user
environment
-20°C/+70°C **
Exposed to limit areas of 2000 m a.s.l.
Humidity
0~95% @40°C non-condensing
SYS-C31-DMV
Information subject to change. Please visit www.seco.com to find the latest version of this manual.
Page.7 of 23
Attention! **The values indicated refer to the maximum temperature of the
environment of use of the device. It is the customer’s responsibility to verify that the
temperature remains within the admissible range indicated in this manual and, if
necessary, adopt any passive cooling solution together with an application-dependent
cooling system that can ensure that the heat sink temperature will not damage the
device itself and/or the connected mechanical parts.
3.2 Software Specifications
C31XXXYY.BBB software version, where:
-
XXX is DMV values customized version
-
YY is the revision
-
BBB is the BIOS version
Software version C31 is released on the SECO website https://www.seco.com and is always
updated and available, even in later versions.
SYS-C31-DMV
Information subject to change. Please visit www.seco.com to find the latest version of this manual.
Page.8 of 23
3.3 Reference directives
SECO S.p.A. places the device on the market, equipping and providing it with:
-
FCC - Part 15 certificate*
-
UL certificate*
-
User manual*
*These documents are available after a request to the manufacturer.
The device also meets the requirements of the following standards:
-
UL 62368-1 3rd edition
SYS-C31-DMV
Information subject to change. Please visit www.seco.com to find the latest version of this manual.
Page.9 of 23
3.4 FCC Regulatory Notices
FCC references to product certification:
- Contains FCC ID: 2ALZB-AW276 and Contains FCC ID: XMR201903EG25G
FCC Regulatory Notices
This device complies with Part 15 of FCC Rules, Operation is Subject to following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received including interference that cause undesired
operation.
Caution: Any changes or modifications to the equipment not expressly approved by the party
responsible for compliance could void user s authority to operate the equipment.
This equipment has been tested and found to comply within the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Re-orient or relocate the receiving antenna • Increase the separation between the
equipment and receiver
• Connect the equipment into an outlet on a different circuit from that to which the receiver is
connected
• Consult the dealer or an experienced radio/TV technician for help.
SYS-C31-DMV
Information subject to change. Please visit www.seco.com to find the latest version of this manual.
Page.10 of 23
3.5 ISED Canada Regulatory Notices
ISED references to product certification:
- Contains IC: 22688-AW276 and Contains IC: 10224A-201903EG25G
- Product Marketing Name (PMN): AWCM276-DMV
- Hardware Version Identification Number (HVIN): AWCM276-DMV
ISED Canada Regulatory Notice
This device is compliant with ISED Canada license-exempt RSS standards.
Operation is authorized under the following two conditions:
1 - the device may not cause harmful interference;
2 - the device must accept any interference received, even if it compromises operation.
RF Exposure information
FCC:
This device complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This device complies with the safety requirements for RF exposure for mobile (>20
cm) use conditions in accordance with FCC rule part 2.1091.
ISED Canada:
This equipment complies with ISED Canada RSS-102 radiation exposure limits set forth for the
general population. This equipment complies with the safety requirements for RF exposure in
accordance with RSS-102 Issue 5 section 2.5.2 for mobile (>20 cm) use conditions.
The minimum compliance distance is 27 cm.
SYS-C31-DMV
Information subject to change. Please visit www.seco.com to find the latest version of this manual.
Page.11 of 23
4Safety devices
4.1 Warnings
Caution! It is the user’s responsibility to apply preventive and protective measures,
in accordance with the legislation of the country of installation and use of the device.
Caution! Only use the accessories supplied by the manufacturer.
Caution! Only connect certified peripherals / devices to the device.
Important! Operations on the device must be carried out by specialized and
authorized personnel only.
Caution! Always disconnect the electrical power supply before carrying out any work
on the device.
Caution! Check that the electrical voltage meets the values indicated in this manual
before connecting the device.
Caution! Disconnect the device from any power source before cleaning.
Warning! The enclosure of the device must be cleaned only with a dry cloth.
Caution! Do not pour liquids of any kind on the device. This may cause fires and/or
electric shocks.
Caution! Keep the device away from exposure to moisture values outside the
admissible range indicated in this manual.
Caution! The device must always be fixed to a machine before proceeding with any
type of operation and/or use.
Caution! This equipment must only be connected to a supply main with protective
earth.
SYS-C31-DMV
Information subject to change. Please visit www.seco.com to find the latest version of this manual.
Page.12 of 23
Caution! It is strictly forbidden to modify the appliance in order not to compromise
the characteristics relating to the declared requirements.
Caution! Make sure that any part of the device cannot come in contact with an
unconscious, anaesthetized or incapacitated patient.
Warning! It is strictly forbidden to cover the device during operation.
Warning! Personnel training is a responsibility of the manufacturer of the device to
which the SYS-C31-DMV will be connected.
Warning! Do not mount the SYS-C31-DMV on machines containing other radio
modules.
Warning! Do not change the antenna of SYS-C31-DMV.
Warning! Install and use the device (antenna) more than 20 cm away from the human
body.
Warning! This equipment complies with FCC and ISED Canada (RSS-102) radiation
exposure limits set forth for extremity SAR and use in contact with it. The highest SAR
value when tested a separation distance of 20cm for extremity use is under the limits.
Warning! The integration of the SYS-C31-DMV in a finished product must be in
compliance with the following rules (reported on the appropriate US and Canadian
government databases, by searching for FCC ID or IC indicated above).
These rules provide in particular the obligation to:
- do not mount the SYS-C31 on machines containing other radio modules
- do not change the antenna
- install and use the device (antenna) more than 16.1 cm away from the human body
- do not install the product in such a way as to cover the labels.
SYS-C31-DMV
Information subject to change. Please visit www.seco.com to find the latest version of this manual.
Page.13 of 23
4.2 Safety pictograms affixed on the device and used in the manual
The device and the manual are equipped with symbols, as indicated in the table below:
PICTOGRAM
DESCRIPTION
UL marking
Caution!
Risks deriving from not reading the instructions.
Symbol used to indicate the need to consult the instruction
manual before using the equipment.
SYS-C31-DMV
Information subject to change. Please visit www.seco.com to find the latest version of this manual.
Page.14 of 23
5Characteristics and components of the device
The SYS-C31-DMV device is a gateway enclosed in a metal box with a heat sink.
Caution! When running, the device can reach very high temperatures, causing the
danger of burns when in contact with the heat sink.
A back cover with 4 universal fastening points is fastened to the connection frame.
The inserts are the only fastening system to integrate the device on any of the customer’s
machines.
5.1 Measurement layout
Length
177 mm
Width
150 mm
Height
26 mm
Centre-to-centre distance of fastening holes A
50 mm
Centre-to-centre distance of fastening holes
on different flanges B
162,8 mm
A
B
SYS-C31-DMV
Information subject to change. Please visit www.seco.com to find the latest version of this manual.
Page.15 of 23
5.2 Components
POS
DESCRIPTION
1
USB 3.0 Type-A
2
USB connector type-C, prot. 3.0
3
HDMI port
4
USB connector type-A, prot. 3.0
5
USB connector type-A, prot. 2.0
6
Ports Ethernet
7
Power supply input
8
Antenna:
•Manufacturer= Dynaflex
•Model= 814_1000RG316_SMMRP
•Cables length= 1000 mm
ORANGE SMA MALE RP connector - LTE CONNECTOR
BLUE SMA MALE RP connector - WiFi/BT Main connector
RED SMA MALE RP connector - WiFi/BT Aux connector
1
2
3
4
5
6
7
8
SYS-C31-DMV
Information subject to change. Please visit www.seco.com to find the latest version of this manual.
Page.17 of 23
6Permitted environmental conditions
6.1 Transport and storage environmental conditions
The table below features permissible environmental conditions for transport and
storage.
Room temperature range
-20 °C ÷ + 70 °C
Relative humidity range
10 % ÷ 95 % @40°C non-condensing
6.2 Operating environmental conditions
Use of the device and of associated control systems that differ from those listed below is not
permitted.
In particular, the installation and operation environment must not be:
-
Exposed to environmental temperatures exceeding -20 °C to + 70 °C;
-
Exposed to limit areas of 2000 m.a.s.l.;
-
Exposed to excessive humidity (10~95% @40°C non-condensing) and rapid changes
in relative humidity (above 0.005 p.u./h);
-
Exposed to corrosive fumes;
-
Exposed to excessive dust;
-
Exposed to abrasive dust;
-
Exposed to oil vapours;
-
Exposed to powder or gas explosive mixtures;
-
Exposed to salt air;
-
Exposed to vibrations, impacts or abnormal shocks;
-
Exposed to weather conditions beyond the limits permitted or dripping;
-
Exposure to unusual transport or storage conditions;
-
Exposure to high or rapid thermal changes (above 5K/h);
-
Presence of nuclear radiation.
SYS-C31-DMV
Information subject to change. Please visit www.seco.com to find the latest version of this manual.
Page.18 of 23
Caution! Environmental conditions that differ from those specified may seriously
damage the device. Positioning the device in environments that do not correspond to
those indicated shall render the warranty null and void for the parts to be replaced.
SECO S.p.A. shall not be held liable if these instructions are not complied with.
SYS-C31-DMV
Information subject to change. Please visit www.seco.com to find the latest version of this manual.
Page.19 of 23
7Installation
7.1 Installing the device
The device does not generate system messages, error messages or fault messages.
Warning! Be sure to fix the device by fastening the screws (if it will be mounted on
machine).
Warning! It’s forbidden to install the device on wall.
In order to install the device, make sure that the incoming electrical power supply
complies with
the following values:
Power supply
Only power supplies certified for the target market and
complying with the regulations in force for this specific
application must be used.
+ 12 V DC
Maximum electrical current deliverables
to the device = 5 A
Minimum power required 20 W
To install the device properly on machine, follow the procedure below:
1
Make sure the electric connection on the destination machine is off and the electric
power supply is disconnected from the device;
2
Prepare the machine /sheet/other making 4 holes of 4mm each, spaced according
to the hole spacing;
3
Fix device to the machine, using 4 screws that will be screwed in matching holes
in the plate with the 4 holes made in step 2;
4
Proceed to connect the electric supply to the device. Once inserted, turn the
connector clockwise in order to lock it in place;
5
Proceed to electrically connect the destination machine.
This manual suits for next models
1
Table of contents
Other Seco Single Board Computer manuals
