Seconique Furniture BERGEN 2327HN User manual

1
BERGEN 1 DOOR 2 DRAWER TV UNIT
OAK EFFECT/WHITE/GREY
ASSEMBLY INSTRUCTIONS
2327HN
2327HN
SEC/AY/12/19/HN1
IMPORTANT
FOR DOMESTIC USE ONLY
PLEASE READ BEFORE YOU CONTINUE FURTHER
CARE AND MAINTENANCE
After unpacking this product please keep the original packaging in case it needs to be returned for any reason.
• Please ensure all fittings and parts are present before commencing with assembly.
• Never drag or push products as this could cause damage to the joints making it inferior.
• We strongly recommend that you keep children away from your work area.
• Assemble this product as close to its final position as possible.
• Do not place this product next to a radiator or in direct sunlight.
• Do not drag or push items across your high gloss furniture as this may cause the surface to scratch.
• Wood is a natural product and may expand if subjected to damp and may shrink or crack if subjected to heat.
Therefore it is recommended that room temperature is maintained, with no sudden temperature fluctuations.
• Make sure any spillage is wiped off immediately.
• Do not place hot or chilled items directly on to the surface, use a place mat or marking will occur.
• For general cleaning use a soft cotton or micro fibre cloth, and do not use detergents of any kind.
• From time to time it may be necessary to tighten fittings, regular inspections should be carried out.
• Do not place on a wet or damp floor as staining may occur to your floor.

*Use of power tools to assemble this product will invalidate
any claim and damage this product making it unsafe!!!
*Please assemble on a clean soft suface to avoid damage.
*Please check contents and read the instructions before commencing assembly.
*Assemble this product following the enclosed instructions carefully.
*Please take care to avoid damaging panels during assembly.
Please Note:
The below parts have all been stamped with the
part number to help identify them during assembly.
PARTS LIST
01
02
03
04
05
06
07
08
09
10
11
12
12 12
12
13
13
14
14
Part Number Part Code Part Description Quantity
01 S300-305-043-HN1-01 Base Panel x1
02 S300-305-043-HN1-02 Left Division Panel x1
03 S300-305-043-HN1-03 Shelf Panel x1
04 S300-305-043-HN1-04 Right Division Panel x1
05 S300-305-043-HN1-05 Left Side Panel x1
06 S300-305-043-HN1-06 Right Side Panel x1
07 S300-305-043-HN1-07 Top Panel x1
08 S300-305-043-HN1-08 Back Panel x1
09 S300-305-043-HN1-09 Door x1
10 S300-305-043-HN1-10 Upper Drawer Front x1
11 S300-305-043-HN1-11 Lower Drawer Front x1
12 S300-305-043-HN1-12 Drawer Side x4
13 S300-305-043-HN1-13 Drawer Bottom x2
14 S300-305-043-HN1-14 Drawer Back Panel x2
2
ITM/S303-
SEC/AY/12/19/HN1

Drawer Runners
Hole Plugs
14x10x14x
FEG
Cam BoltUnion screw 18mm
42x
H
Nail 1/8x23mm
Flat Head Screw
O3,5x10mm
Flat Head Screw
O3,5x40mm Dowel O8x25mm
Flan Head Screw
O3,5x14mm
Cam Nut O15mm
3
ITM/S303-
FITTINGS LIST
TIPS FOR FITTINGS CAM-LOCKS
USE
DO NOT USE
When fitting cam nut. Ensure starting
position is correct before you insert
connecting cam bolt turn clockwise until
secure.
CAMBOLT
Tighten until shoulder in
flush with panel. Do not
overtighten or undertighten
(see example beside).
Shoulder
Panel Panel
Cam bolt head needs to be in centre
CORRECT WRONG
20x34x08x18xCDAB
02x
01x
14xL
O
I
Glue
02x
02xK
J
Hinge
12 mm Hinge Plate
04x01x
MN
Metal Leg Adjustable Leg
!




SEC/AY/12/19/HN1

Pre-Assembly
Detail 2 Detail 17 Detail 18 Detail 19
Detail 1
1
2
3
Detail 1
Detail 1
Detail 1
Detail 2
Detail 2
Detail 2
Detail 2
Detail 18
Detail 18
Detail 17
Detail 18
Perform the adjustment
of the leg (N) at the
moment of fixing it.
Detail 19
Detail 18
Detail 1
01
E
E
E
EE
MM
B
B
B
B
N
N
ITM/S303-
10x
B04x01x MN
Metal Leg Adjustable Leg
10x
E
Union screw 18mm
Male
(Female)
Female
(Male)
(Male)
Flan Head Screw
O3,5x14mm
SEC/AY/12/19/HN1
4

Pre-Assembly
Detail 3
Detail 3
Detail 3
Detail 3
Detail 3
Detail 3
Detail 3
Detail 3
Detail 3
Detail 3
Detail 4
Detail 4
Detail 4
Detail 4
Detail 6
Detail 6
Detail 3
Detail 3
Detail 3
Detail 3
Detail 3
Detail 3
Detail 3
Detail 3 02
03
04
05
06
Detail 3 Detail 4 Detail 6
L
Drawer Runners
2x
2x
DLJ
B
B
C
C
O
PRE-DRILLED HOLE PRE-DRILLED HOLE
Flat Head Screw
O3,5x10mm Dowel O8x25mm
Flan Head Screw
O3,5x14mm
SECOND HOLE
FIRST HOLE (LINE UP WITH PRE-DRILLED HOLE) LAST THIRD HOLE
L
5
ITM/S303-
12x18x
04xCDB O
Glue
02x
J
12 mm Hinge Plate
SEC/AY/12/19/HN1

Pre-Assembly
Detail 3 Detail 7 Detail 8
FB
K
B
OD
6
ITM/S303-
Detail 7
Detail 7
Detail 7
Detail 7
Detail 7
Detail 7
Detail 7
Detail 7
Detail 7
Detail 3
Detail 3
Detail 8
Detail 8
Detail 7
07
09
10
12
14
11
4x
2x
16x
04xDB O
Glue
02x
K
Hinge
14x
F
Cam Bolt
SEC/AY/12/19/HN1
Dowel O8x25mm
Flan Head Screw
O3,5x14mm

1
Detail 9
A
7
ITM/S303-
Detail 3
Detail 3
Detail 3
Detail 3
Detail 9
Detail 20
02
03
04
02x
A01x OP
Glue
SEC/AY/12/19/HN1
Detail 20
A
P
Detail 3
O
Hole Plugs
Flat Head Screw
O3,5x40mm

Detail 9
A
2
8
ITM/S303-
02x
A O
Glue
SEC/AY/12/19/HN1
Detail 3 Detail 3
Detail 3 Detail 3
Detail 9
Detail 9
01
Detail 3
O
Flat Head Screw
O3,5x40mm

3
Detail 9
A
Detail 11
Detail 5
G
Flat Head Screw
O3,5x40mm Cam Nut O15mm
9
ITM/S303-
Detail 9
Detail 9
Detail 5
and 11
Detail 5
Detail 5
Detail 5
and 11
Detail 5
and 11
Detail 5
Detail 3
05
06
04x
A03x OP
Glue
P
06x
G
SEC/AY/12/19/HN1
DD
eettaaiill55
DDeettaaiill55
aa
nn
d
d
1111
07
Detail 3
O
Hole Plugs

4
For your future reference
order number should be here
Nail 1/8x23mm
10
ITM/S303-
xxxxxx
Detail 12
490mm 430mm
2mm
2mm
42x
H
SEC/AY/12/19/HN1
Detail 12
2mm
H
H
H
xxxxxxxxxxxx
49
49
0m0mmm
43430m0mmm
2m
2m
2
2
m
m
08

5
Detail 14
J
K
09
ADJUSTMENTS
Depth Adjustment Height Adjustment Internal Adjustment
Detail 11
11
ITM/S303-
Detail 14
Detail 11
Detail 11
SEC/AY/12/19/HN1
06x
P
Hole Plugs
P

6
Detail 3
O
Detail 5
Detail 5
Detail 3
14
Detail 3
Detail 5
G
04x
G
1°
2°
O
Glue
13
12
12
2x
2x
Cam Nut O15mm
12
ITM/S303-
SEC/AY/12/19/HN1

7ITM/S303-
Detail 11
Detail 3
O
L
Drawer Runners
2x
2x
08x
CO
Glue
FIRST HOLE FIRST HOLE
L
3° 4°
04x
G
Detail 5
G
Detail 16
L
D
D
Detail 16
Detail 5 and 11
Detail 5 and 11
Detail 16
2x 2x
Detail 3
Detail 3
10
11
04x
P
Hole Plugs
P
Flat Head Screw
O3,5x10mm Cam Nut O15mm
13
SEC/AY/12/19/HN1

8
9
ITM/S303-
11
10
12
12
12
12
13
13
14
14
10
11
14
SEC/AY/12/19/HN1