Seconique Furniture CORONA 5 User manual

DO NOT
USE
!
PAGE 1
54271-DS
ASSEMBLY INSTRUCTIONS
IMPORTANT
PLEASE READ BEFORE YOU CONTINUE FURTHER
After unpacking this product please keep the original packaging in case it needs to be
returned for any reason.
• Please ensure all fittings and parts are present before commencing with assembly.
• We recommend that you lay a blanket or sheet on the floor to avoid damage to both your
floor and the product.
• We strongly recommend that you keep children away from your work area.
• Assemble this product as close to its final position as possible.
• Never drag or push products as this could cause damage to the joints making it inferior.
• Do not place this product next to a radiator or in direct sunlight.
• Wood is a natural product and may expand if subjected to damp and may shrink or crack
if subjected to heat. Therefore it is recommended that room temperature is maintained,
with no sudden temperature fluctuations.
• Make sure any spillage is wiped o ffimmediately.
• Do not place hot or chilled items directly on to the surface, use a place mat or marking
will occur.
• For general cleaning use a duster, and do not use detergents of any kind. However, the
surface will need to be retreated from time to time. This can be done by using block wax
(unperfumed) and rubbing it over the whole item.
• From time to time it may be necessary to tighten fittings, regular inspections should be
carried out.
CARE AND MAINTENANCE
CORONA 5' DINING BENCH
SEC/SH/09/20/DS2
FOR DOMESTIC USE ONLY

GLUE
Part Code
Part Number Part Description Quantity Carton
1
2
3
4
5
6
S400-420-002-DS1-01 Bench Top 11/2
Leg
Long Support Bar
Long Crossbar
Short Support Bar
Short Crossbar
S400-420-002-DS1-02
S400-420-002-DS1-03
S400-420-002-DS1-04
4
2
1
2
2
2/2
1/2
1/2
1/2
S400-420-002-DS1-05
S400-420-002-DS1-06
TOOLS REQUIRED
1/2
A12 D
E
01
01
B04
HARDWARE LIST
Ø4,0 x 40CP
PAGE 2
PARTS LIST
C10
1/+
1/+
02
2
2
2
3
4
5
5
6
6
01
3
1/+
Ø7,0x80
Ø7,0x50
SEC/SH/09/20/DS2
1
2

GLUE
A
D
X2
E
A
D
Detail 1 Detail 2 Detail 3
B
D
Detail 1
HARDWARE REQUIRED
PARTS REQUIRED
3 - x2
LONG SUPPORT BAR
TOOLS REQUIRED
STEP 2
D01
HARDWARE REQUIRED
2 - x4
LEG
5 - x2
SHORT SUPPORT BAR
STEP 1
PARTS REQUIRED
PAGE 3
6 - x2
SHORT CROSSBAR
TOOLS REQUIREDTOOLS REQUIRED
2
5
6
Ø7,0x80
A08
D01
Ø7,0x80
A04
E01
Ø7,0x50
B04
4 - x1
LONG CROSSBAR
Detail 1
Detail 1
x2
Detail 1
Detail 2
Detail 3
3
3
4
SEC/SH/09/20/DS2

STEP 4
HARDWARE REQUIRED
STEP 3
PAGE 4
C10
Ø4,0x40 CP
TOOLS REQUIRED
c
Detail 4
SEC/SH/09/20/DS2
Detail 4
Detail 4
CENTRALIZE
FOR YOUR FUTURE
REFERENCE
ORDER NUMBER
SHOULD BE HERE
00000DS
1 - x1
BENCH TOP
PARTS REQUIRED
11