Seconique Furniture Tortilla Nest of 2 Tables User manual

54998
DO NOT
USE
!
PAGE 1
IMPORTANT
PLEASE READ BEFORE YOU CONTINUE FURTHER
After unpacking this product please keep the original packaging in case it needs to be
returned for any reason.
• Please ensure all fittings and parts are present before commencing with assembly.
• We recommend that you lay a blanket or sheet on the floor to avoid damage to both your
floor and the product.
• We strongly recommend that you keep children away from your work area.
• Assemble this product as close to its final position as possible.
• Never drag or push products as this could cause damage to the joints making it inferior.
• Do not place this product next to a radiator or in direct sunlight.
• Wood is a natural product and may expand if subjected to damp and may shrink or crack
if subjected to heat. Therefore it is recommended that room temperature is maintained,
with no sudden temperature fluctuations.
• Make sure any spillage is wiped o ffimmediately.
• Do not place hot or chilled items directly on to the surface, use a place mat or marking
will occur.
• For general cleaning use a duster, and do not use detergents of any kind. However, the
surface will need to be retreated from time to time. This can be done by using block wax
(unperfumed) and rubbing it over the whole item.
• From time to time it may be necessary to tighten fittings, regular inspections should be
carried out.
CARE AND MAINTENANCE
FOR DOMESTIC USE ONLY
SEC/SH/10/21/PJ1
TORTILLA NEST OF 2 TABLES
ASSEMBLY INSTRUCTIONS

SEC/SH/10/21/PJ1
245mm
500mm
500mm
375mm
375mm
1
2
2
3
3
44
5
5
6
7
78
8
99
10
10
GLUE
Ø4,0 x 40CP
1/+
Wooden Cap
A10 D
E
01
16
B16
C01
1/+
Ø7,0x90
F
8,0x50
2/+ 16
S300-303-017-PJ1-05
S300-303-017-PJ1-06
S300-303-017-PJ1-07
S300-303-017-PJ1-08
S300-303-017-PJ1-09
S300-303-017-PJ1-10
5
6
7
8
21/1
Leg (Large)
Side Panel (Small)
1
2
2
1/1
1/1
1/1
9
10
Leg (Small) (Red Marking) 2
2
1/1
1/1
Top Panel (Small)
Front/Rear Panel (Small)
Leg (Small)
Part Code
Part Number Part Description Quantity Carton
1
2
3
4
S300-303-017-PJ1-01 Top Panel (Large) 11/1
Front/Rear Panel (Large)
Side Panel (Large)
Leg (Large) (Red Marking)
2
2
2
1/1
1/1
1/1
S300-303-017-PJ1-02
S300-303-017-PJ1-03
S300-303-017-PJ1-04
TOOLS REQUIRED
HARDWARE LIST
PAGE 2
PARTS LIST
to help identify them during assembly.
Please Note:
The below parts have been number/colour coded
to help identify them during assembly.

SEC/SH/10/21/PJ1
D
GLUE
Detail 1
F
STEP 2
STEP 1
PAGE 3
TOOLS REQUIRED
D01
GLUE
F16
Ø8,0x50
HARDWARE REQUIRED
2 - x2
FRONT/REAR PANEL (LARGE)
3 -
PARTS REQUIRED
x2
SIDE PANEL (LARGE)
D
GLUE
Detail 1
F
B
Detail 2
Detail 1
Detail 1
Detail 1
Detail 1
Detail 1
Detail 1
Detail 1
Detail 1
2
3
7
8X2
X2
X2
X2
260mm
470mm
245mm
170mm
7 - x2
FRONT REAR PANEL (SMALL)
8 - x2
SIDE PANEL (SMALL)
HARDWARE REQUIRED
PARTS REQUIRED
Detail 2
(Red Marking)
7 - x2
FRONT/REAR PANEL (SMALL)
9 - x2
LEG (SMALL) (RED MARKING)
10- x2
LEG (SMALL)
SMALL
375mm
375mm
X2
7
10
9
D01
GLUE
TOOLS REQUIRED
Ø7,0x70 mm
B04
F04
Ø8,0x50 mm
Detail 2

SEC/SH/10/21/PJ1
SMALL
STEP 4
STEP 3
PAGE 4
HARDWARE REQUIRED
PARTS REQUIRED
8 - x2
SIDE PANEL (SMALL)
D01
GLUE
TOOLS REQUIRED
Ø7,0x70 mm
B04
F04
Ø8,0x50 mm
B
Detail 2
D
F
GLUE
Detail 3 SMALL
A
Detail 4
PARTS REQUIRED
6 - TOP PANEL (SMALL) x1
E
Detail 5
CENTRALIZE
Detail 4
Detail 5
00000PJ
FOR YOUR FUTURE
REFERENCE
ORDER NUMBER
SHOULD BE HERE
HARDWARE REQUIRED
A04
Ø4,0 x 40CP
TOOLS REQUIRED
E08
Wooden Cap
6
Detail 2
Detail 2
Detail 2
Detail 3
8
8
Detail 2

SEC/SH/10/21/PJ1
Detail 2
HARDWARE REQUIRED
PARTS REQUIRED
D01
GLUE
TOOLS REQUIRED
Ø7,0x70 mm
B04
F04
Ø8,0x50 mm
B
Detail 2
D
F
GLUE
Detail 3 SMALL
STEP 6
STEP 5
PAGE 5
D
GLUE
Detail 1
F
B
Detail 2
HARDWARE REQUIRED
PARTS REQUIRED
2 - x2
FRONT/REAR PANEL (LARGE)
4 - x2
LEG (SMALL) (RED MARKING)
5 - x2
LEG (SMALL)
D01
GLUE
TOOLS REQUIRED
Ø7,0x70 mm
B04
F04
Ø8,0x50 mm
Detail 1
Detail 2
(Red Marking)
500mm
500mm X2
4
52
LARGE
Detail 2
Detail 2
Detail 3
Detail 2
3
3
Detail 2
3 - x2
SIDE PANEL (LARGE)