Seconique BLACK WOOD GRAIN LISBON Quick start guide

BLACK WOOD GRAIN
DO NOT
USE
LISBON 3 DRAWER BEDSIDE
ASSEMBLY INSTRUCTIONS
SEC/SH/01/21/EU2
Page 01
IMPORTANT
FOR DOMESTIC USE ONLY
PLEASE READ BEFORE YOU CONTINUE FURTHER
THE PRODUCT YOU HAVE PURCHASED WILL GIVE YOU MANY
YEARS OF SERVICE IF YOU FOLLOW THE GUIDELINES FOR ITS
SAFE ASSEMBLY AND PERIODIC MAINTENANCE AND CLEANING.
ASSEMBLE ON A SOFT CLEAN SURFACE.
DO NOT USE ANY TOOLS OTHER THAN THOSE SHOWN.
ANY SPANNERS OR ALLEN KEYS REQUIRED ARE INCLUDED WITH
THE FITTINGS KIT.
DO NOT FOR ANY REASON USE A POWER TOOL TO ASSEMBLE
THIS PRODUCT. ITS USE WILL INVALIDATE ANY CLAIM YOU MAY
HAVE AND COULD MAKE THIS PRODUCT UNSAFE.
DEPENDING ON THE AMOUNT OF USE THIS PRODUCT RECEIVES
IT MAY BE NECESSARY TO TIGHTEN UP THE FIXINGS FROM TIME
TO TIME. THIS IS COMPLETELY NORMAL FOR ANY FLAT PACK
FURNITURE. DO NOT OVERTIGHTEN FIXING.
FOR CLEANING, YOU MAY USE A DAMP CLOTH (NOT WET) DO NOT
USE POLISH, DETERGENT OR CHEMICAL CLEANERS.
THE SURFACE OF THIS ITEM IS NOT HEAT RESISTANT. ALWAYS
USE A PLACE MAT UNDER HOT OR COLD ITEMS TO PREVENT
MARKING.

PART LIST
SEC/SH/01/21/EU2
Page 02
2
3
4
5
6Back Panel
Top Panel
Right Side Panel
Back Crossbar
Base Front Apron 1
1
1
1
1
1/1
1/1
1/1
1/1
1/1
Part Number Part Code Part Description Quantity Carton
1S100-103-037-EU1-01 Left Side Panel 11/1
5
1
6
4
11
7
8
9
10
11
1/1
1/1
1/1
1/1
1/1
S100-103-037-EU1-02
S100-103-037-EU1-03
S100-103-037-EU1-04
S100-103-037-EU1-05
S100-103-037-EU1-06
S100-103-037-EU1-07
S100-103-037-EU1-08
S100-103-037-EU1-09
S100-103-037-EU1-10
S100-103-037-EU1-11 Drawer Base
Drawer Front
Right Side Drawer
Left Side Drawer
Drawer Back 3
3
3
3
3
3
2
7
10 9
8

HARDWARE LIST
(SCREWDRIVER NOT PROVIDED)
USE A FLAT HEAD SCREWDRIVER TO TIGHTEN THE CAM NUTS. A QUARTER TURN CLOCKWISE IS ALL THAT IS NEEDED.
STEP 1 - PUSH CAM BOLT INTO INSERT
STEP 2 - ALIGN THE CAM BOLT WITH THE HOLE AND PUSH TOGETHER UNTIL FLUSH. ( MAKE SURE THE ARROW OF
THE CAM LOCK IS POINTING TOWARD ON THE EDGE OF THE PANEL.)
STEP 3 - THE HEAD OF THE BOLT GOES INTO THE WIDE MOUTH OF THE CAM LOCK. YOU THEN TURN THE LOCK SO
THE NARROW PART CLOSES OVER THE BOLT.
Page 03
A
B
C
D
E
F
G
H
I
DOWEL 6 X 30MM 20 PCS
DRAWER RUNNER A - L/R 6 PCS
BOLT M7 X 60MM
3 PCS
SCREW M4 X 38MM 12 PCS
CAM BOLT + CAM NUT 10 SETS
BOLT M6 X 50MM
HANDLE
2 PCS
2 PCS
SCREW M3.5 X 16MM 22 PCS
TACK 28 PCS
J
K
L
M
N
O
P
DRAWER RUNNER B - L/R
SCREW M3.5 X 12MM
ANTI - TIP STRAP
HANDLE SCREW 19MM
SCREW M4 X 16MM
PLASTIC FOOT
ALLEN KEY
6 PCS
2 PCS
2 PCS
28 PCS
6 PCS
4 PCS
1 PC
SEC/SH/01/21/EU2

STEP 1
PARTS REQUIRED
1 - LEFT SIDE PANEL x1
HARDWARE REQUIRED
A04
H04
PARTS REQUIRED
2 - BASE FRONT APRON x1
HARDWARE REQUIRED
A
H04
STEP 2
04
Page 04
FIRST HOLE
FRONT
TOP SECOND HOLE
BACK
LAST SECOND HOLE
A
1
4
H
A
I
L
4 - RIGHT SIDE PANEL x1
I06
L24
TOOLS REQUIRED
5
H
A
A
3 - BACK CROSSBAR x1
5 - TOP PANEL x1
SEC/SH/01/21/EU2
3
2
TOOLS REQUIRED

STEP 3
PARTS REQUIRED
1 - LEFT SIDE PANEL x1
HARDWARE REQUIRED
B02
C02
PARTS REQUIRED
5 - TOP PANEL x1
STEP 4
Page 05
1
4
C
B
SEC/SH/01/21/EU2
2 - BASE FRONT APRON x1
3 - BACK CROSSBAR x1
4 - RIGHT SIDE PANEL x1
TOOLS REQUIRED
TOOLS REQUIRED
H
3
5
HARDWARE REQUIRED
2