Seconique ATHENS User manual

ATHENS RECTANGULAR DINING TABLE
ASSEMBLY INSTRUCTIONS
SEC/SH/04/21/SF1
Page 01
FOR DOMESTIC USE ONLY
IMPORTANT
PLEASE READ BEFORE YOU CONTINUE FURTHER
SERVICE IF YOU FOLLOW THE GUIDELINES FOR ITS SAFE ASSEMBLY AND
PERIODIC MAINTENANCE AND CLEANING .
ASSEMBLE ON A SOFT CLEAN SURFACE
DO NOT USE ANY TOOLS OTHER THAN THOSE SHOWN.
ANY SPANNERS OR ALLEN KEYS REQUIRED ARE INCLUDED WITH THE
FITTINGS KIT.
DO NOT FOR ANY REASON USE A POWER TOOL TO ASSEMBLE THIS
PRODUCT. ITS USE WILL INVALIDATE ANY CLAIM YOU MAY HAVE AND COULD
MAKE THIS PRODUCT UNSAFE.
DEPENDING ON THE AMOUNT OF USE THIS PRODUCT RECEIVES IT MAY
BE NECESSARY TO TIGHTEN UP THE FIXINGS FROM TIME TO TIME . THIS IS
COMPLETELY NORMAL FOR ANY FLAT PACK FURNITURE.
DO NOT OVERTIGHTEN FIXINGS.
FOR CLEANING, YOU MAY USE A DAMP CLOTH (NOT WET) DO NOT USE POLISH,
DETERGENT OR CHEMICAL CLEANERS.
THIS PRODUCT MAY STAIN OR MARK IF ALLOWED TO COME INTO
CONTACT WITH WET OR DAMP OBJECTS.
THE SURFACE OF THIS ITEM IS NOT HEAT RESISTANT. ALWAYS USE A
PLACE MAT UNDER HOT OR COLD ITEMS TO PREVENT MARKING.
THE PRODUCT YOU HAVE PURCHASED WILL GIVE YOU MANY YEARS OF

HARDWARE LIST
SEC/SH/04/21/SF1
Page 02
PARTS LIST
1234
Part Code
Part Number Part Description Quantity Carton
1
2
3
4
S400-403-043-SF1-01 Table Top 11/1
Side Support Bar
Table Legs
End Support Bar
S400-403-043-SF1-02
S400-403-043-SF1-03
S400-403-043-SF1-04
2
2
2
1/1
1/1
1/1
Bolts M8x25mm
Bolts M8x40mm
Adjusting Foot
Allen Key
Bolts M8x15mm
BEFORE YOU START ASSEMBLING.IF YOU DO FIND THAT
PLEASE CHECK THAT YOU HAVE ALL THE PARTS LISTED
PLEASE CONTACT YOUR SUPPLIER IMMEDLATELY.
SOMETHING IS MISSING.DO NOT CONTINUE ASSEMBLY.

STEP 1
STEP 2
1 - x1
TABLE TOP
PARTS REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
A08
2 - x2
SIDE SUPPORT BAR
3 - x2
TABLE LEGS
PARTS REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
B02
SEC/SH/04/21/SF1
Page 03
M8x40mm
M8x25mm M8x15mm
E
1
2
2
A
M8x40mm M8x25mm
M8x15mm
B
3
4
E
X2
4 - x2
END SUPPORT BAR

STEP 3
STEP 4
1 - x1
TABLE TOP
PARTS REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
C06
PARTS REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
SEC/SH/04/21/SF1
Page 03
M8x40mm
M8x25mm
M8x15mm
C
X2
D04
D

ATHENS DINING CHAIR
ASSEMBLY INSTRUCTIONS
SEC/SH/03/21/SF1
Page 01
FOR DOMESTIC USE ONLY
IMPORTANT
PLEASE READ BEFORE YOU CONTINUE FURTHER
SERVICE IF YOU FOLLOW THE GUIDELINES FOR ITS SAFE ASSEMBLY AND
PERIODIC MAINTENANCE AND CLEANING .
ASSEMBLE ON A SOFT CLEAN SURFACE
DO NOT USE ANY TOOLS OTHER THAN THOSE SHOWN.
ANY SPANNERS OR ALLEN KEYS REQUIRED ARE INCLUDED WITH THE
FITTINGS KIT.
DO NOT FOR ANY REASON USE A POWER TOOL TO ASSEMBLE THIS
PRODUCT. ITS USE WILL INVALIDATE ANY CLAIM YOU MAY HAVE AND COULD
MAKE THIS PRODUCT UNSAFE.
DEPENDING ON THE AMOUNT OF USE THIS PRODUCT RECEIVES IT MAY
BE NECESSARY TO TIGHTEN UP THE FIXINGS FROM TIME TO TIME . THIS IS
COMPLETELY NORMAL FOR ANY FLAT PACK FURNITURE.
DO NOT OVERTIGHTEN FIXINGS.
FOR CLEANING, YOU MAY USE A DAMP CLOTH (NOT WET) DO NOT USE POLISH,
DETERGENT OR CHEMICAL CLEANERS.
THIS PRODUCT MAY STAIN OR MARK IF ALLOWED TO COME INTO
CONTACT WITH WET OR DAMP OBJECTS.
THE SURFACE OF THIS ITEM IS NOT HEAT RESISTANT. ALWAYS USE A
PLACE MAT UNDER HOT OR COLD ITEMS TO PREVENT MARKING.
THE PRODUCT YOU HAVE PURCHASED WILL GIVE YOU MANY YEARS OF
GREY PU
MAX CHAIR
WEIGHT
100KG

HARDWARE LIST
123
SEC/SH/03/21/SF1
Page 02
PARTS LIST
A
B
C
D
4PCS
1PC
1PC
5PCS
Bolts M8x25mm
Bolts M8x40mm
Allen Key
Metal Washer
HARDWARE NAME QTY
REF
Part Code
Part Number Part Description Quantity Carton
1
2
3
S400-402-097-SF1-01 Seat Pad 11/1
Chair Leg (A)
Chair Leg (B)
S400-402-097-SF1-02
S400-402-097-SF1-03
1
1
1/1
1/1
BEFORE YOU START ASSEMBLING.IF YOU DO FIND THAT
PLEASE CHECK THAT YOU HAVE ALL THE PARTS LISTED
PLEASE CONTACT YOUR SUPPLIER IMMEDIATELY.
SOMETHING IS MISSING.DO NOT CONTINUE ASSEMBLY.

STEP 1
STEP 2
SEC/SH/03/21/SF1
Page 03
M8x40mm
M8x25mm M8x40mm
1 - x1
SEAT PAD
PARTS REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
B01
D01
2 - x1
CHAIR LEG (A)
PARTS REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
3 - x1
CHAIR LEG (B)
A04
D04
3
2
1
D
B
C
A
D
C
M8x25mm
MAX CHAIR
WEIGHT
100KG