Seconique BLUE VELVET FABRIC AMELIA 4'6" BED User manual

THE PRODUCT YOU HAVE PURCHASED WILL GIVE YOU MANY YEARS OF
SERVICE IF YOU FOLLOW THE GUIDELINES FOR ITS SAFE ASSEMBNLY AND
PERIODIC MAINTENANCE AND CLEANING.
ASSEMBLE ON A SOFT CLEAN SURFACE.
DO NOT USE ANY TOOLS OTHER THAN THOSE SHOWN.
ANY SPANNERS OR ALLEN KEYS REQUIRED ARE INCLUDED WITH THE FITTINGS
KIT.
DO NOT FOR ANY REASON USE A POWER TOOL TO ASSEMBLE THIS PRODUCT .
ITS USE WILL INVALIDATE ANY CLAIM YOU MAY HAVE AND COULD MAKE THIS
PRODUCT UNSAFE.
DEPENDING ON THE AMOUNT OF USE THIS PRODUCT RECEIVES IT MAY BE
NECESSARY TO TIGHTEN UP THE FIXINGS FROM TIME TO TIME. THIS IS
COMPLETELY NORMAL FOR ANY FLAT PACK FURNITURE.
FOR CLEANING YOU MAY USE A DAMP CLOTH(NOT WET). DO NOT USE
POLISH,DETERGENT OR CHEMICAL CLEANERS.
THIS PRODUCT MAY STAIN OR MARK IF ALLOWED TO COME INTO CONTACT
WITH WET OR DAMP OBJECTS AS MATERIALS USED HAVE NOT BEEN SCOTCH
GUARDED.
THE SURFACE OF THIS ITEM IS NOT HEAT RESISTANT, ALWAYS USE A PLACE
MAT UNDER HOT OR COLD ITEMS. PREVENT MARKING
AMELIA 4'6" BED
ASSEMBLY INSTRUCTIONS
IMPORTANT
PLEASE READ BEFORE YOU CONTINUE FURTHER
Page 01
FOR DOMESTIC USE ONLY
SEC/SH/09/22/YF1
BLUE VELVET FABRIC
MAX BED
WEIGHT
200KG

Page 02
5
PART LIST
Part Code
Part Number Part Description Quantity Carton
1
2a
2b
3
4
5
6
7
8
S200-203-104-YF1-01 Headboard 11/2
S200-203-104-YF1-02A
S200-203-104-YF1-02B
S200-203-104-YF1-03
S200-203-104-YF1-04
S200-203-104-YF1-05
S200-203-104-YF1-06
S200-203-104-YF1-07
S200-203-104-YF1-08
1
1
1
2
4
2
1
26
Le Wing
Footboard
Centre Support Leg
Side Rail
Wooden Slat
1/2
1/2
2/2
1/2
2/2
2/2
1/2
2/2
Right Wing
Wooden Feet
Centre Rail
9S200-203-104-YF1-09 1
Centre Cross Rail 2/2
4
2a
6
3
7
6
9
8
2b
1
PLEASE CHECK THAT YOU HAVE ALL THE PARTS LISTED
BEFORE YOU START ASSEMBLING, IF YOU DO FIND THAT
SOMETHING IS MISSING, DO NOT CONTINUE ASSEMBLY.
PLEASE CONTACT YOUR SUPPLIER IMMEDIATELY.
SEC/SH/09/22/YF1

No Part Name Qty Carton
A 5/16 x 25mm Bolt x12 2/2
B 5/16 x 50mm Bolt x11 2/2
C M8 Washer x18 2/2
D Nut x7 2/2
E Allen Key x1 2/2
F Spanner x1 2/2
G Plastic Centre Cap x13 1/2
H Plastic End Cap x26 1/2
PLEASE CHECK THAT YOU HAVE ALL THE PARTS LISTED
BEFORE YOU START ASSEMBLING, IF YOU DO FIND THAT
SOMETHING IS MISSING, DO NOT CONTINUE ASSEMBLY.
PLEASE CONTACT YOUR SUPPLIER IMMEDIATELY.
SEC/SH/09/22/YF1

STEP 1
STEP 2
1 - x1
HEADBOARD
PARTS REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
3 - x1
FOOTBOARD
PARTS REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
5 - x2
WOODEN FEET
Page 04
5 - x2
WOODEN FEET 1
5
5
3
5
5
SEC/SH/09/22/YF1

STEP 3
STEP 4
1 - x1
HEADBOARD
PARTS REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
A08
4 - x2
CENTRE SUPPORT LEG
PARTS REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
7 - x1
CENTRE RAIL
Page 05
3 - x1
FOOTBOARD
5/16x25mm
5/16x50mm
5/16x25mm
1
3
6
6
6 - x2
SIDE RAIL
A
A
7
4
4
B04
5/16x50mm
C08
D04
BB
CC
D
5/16x50mm
5/16x25mm
SEC/SH/09/22/YF1

STEP 5
STEP 6
PARTS REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
A04
PARTS REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
Page 06
5/16x25mm
G13
H26
5/16x50mm
5/16x25mm
B03
5/16x50mm
C06
D03
A
A
B
C
C
D
8 - x26
WOODEN SLAT
9 - x1
CENTRE CROSS RAIL
9
8
8
H
G
SEC/SH/09/22/YF1

STEP 7
STEP 8
PARTS REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
PARTS REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
Page 07
2a
B04
5/16x50mm
C04
2a - x1
LEFT WING
5/16x50mm
5/16x25mm
2b - x1
RIGHT WING 2b
C
C
B
B
MAX BED
WEIGHT
200KG
SEC/SH/09/22/YF1