PotteryBarn LIVINGSTON QUADRUPLE BRIDGE User manual

Page 1of 4
LIVINGSTON QUADRUPLE BRIDGE
Date : 28-March-16
Rev : - www.potterybarn.com

Page 2of 4
Important Safety Instructions:
Please read all instructions carefully before assembling.
For your safety, assembly by two or more adults is strongly recommended.
Keep instructions for future use.
Use only vendor supplied hardware to assemble. Using unauthorized hardware could jeopardize the structural
integrity of the item.
The Livingston Quadruple Bridge is designed for use with Livingston Single Hutch or Double Hutch.
Pre-assembly:
Remove all parts and hardware from the box and lay out on a clear carpeted or scratch-free work surface, as
this will avoid damaging parts during assembly. The shipping box provides an ideal work surface.
Do not dispose of any packaging or contents of the shipping carton until assembly is completed to avoid
accidentally discarding small parts or hardware.
Use the parts and hardware lists below to identify and separate each of the pieces included.
The illustrations provided allow for easier assembly when used in conjunction with the assembly instructions.
The use of power tools to aid in assembly is not recommended. Power tools can damage hardware and split
wood.
Parts Enclosed: Hardware Enclosed:
Livingston Quadruple Bridge (A) –1x
Philip Scew Driver
Hutches Options (Sold Separately):
Configuration #1: Livingston Single Hutch (B) –2x
Configuration #2: Livingston Double Hutch (C) –2x
D. Bolts Connector –2 Set
E. Allen Key M4 –1x
Tool Required:

Page 3of 4
1. Turn out the mending plates on the top of Quadruple Bridge (A) by loosen the allen bolts pre-attached on its
mending plates with the Allen Key (E) as shown in fig. 1, illustration. 1.
2. Re-tighten with the Allen Key (E).
Fig. 1 Illustration.1
Assembly Instructions :
Configuration #1: Livingston Single Hutch (B) and Livingston Single Hutch (B).
Position all Livingston Modular items which will be set up together at the desired location.
Use drill bit to penetrate the pre-drilled holes on top side of the side panels of Hutches that will be connected
together as shown in illustration. 2.
Place the Quadruple Bridge (A) in between the Single Hutches (B) by laying the mending plates pre-attached
on the Quadruple Bridge (A) onto the Top of the Hutches Items as shown in fig. 2.
Align the holes at side panels of all cases and insert the connector bolts (D & D) then tighten with a screwdriver
(Not Included) as shown in fig. 3, illustration. 3.
Fig. 2 Fig. 3
Illustration. 2 Illustration. 3
A
B
B
A

Page 4of 4
Configuration #2: Livingston Double Hutch (C) and Livingston Double Hutch (C).
Position all Livingston Modular items which will be set up together at the desired location.
Use drill bit to penetrate the pre-drilled holes on the side panels of Hutches that will be connected together as
shown in illustration. 4.
Place the Quadruple Bridge (A) in between the Double Hutches (C) by laying the mending plates pre-attached
on the Quadruple Bridge (A) onto the Top of the Hutches Items as shown in fig. 4.
Align the holes at side panels of all cases and insert the connector bolts (D & D) then tighten with a screwdriver
(Not Included) as shown in fig. 5, illustration. 5.
Fig. 4 Fig. 5
Illustration. 4 Illustration. 5
Care Instructions:
Dust often using a clean, soft, dry and lint-free cloth.
Blot spills immediately and wipe with a clean, damp, cloth.
We do not recommend the use of chemical cleansers, abrasives or furniture polish on our lacquered finish.
Thank you for your purchase
Stores | catalog | www.potterybarn.com
A
C
C