Home Styles Naples 88 5530 08 User manual

Part List
88 5530 08
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed. Casual Attire For Today's Home
Hardware List
A.
Top
1 pc.
Tools required for assembly : Phillips screwdriver
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
B.
Side Panel
1 pc.
D.
Front Rail
1 pc.
C.
Side Panel
1 pc.
E.
Back Panel
1 pc.
G.
Base
1 pc.
H.
Shelf
4 pcs.
F.
Plinth
1 pc.
I.
Door
1 pc.
J.
Door
1 pc.
Cam Lock
10 pcs.(+1 extra)
Cam Lock Screw
10 pcs.(+1 extra)
Adjustable Pin
16 pcs. (+2 extra)
Machine Screw
2 pcs.
Wood Screw
for Megnet
8 pcs. (+1 extra)
Magnet
4 pcs.
Wood Screw
for Back Panel
6 pcs.(+1 extra)
Naples
Media Cabinet
Steel Plate
2 pcs.
Head Cap Bolt
4 pcs.(+1 extra)
Hex Wrench
1 pc.
Small
Hex Wrench
1 pc.
Door
Pull Handle
2 pcs.

A
Cam Lock Screw
IMPORTANT
Do not tighten up all the screws until
each part is properly assembled.
STEP 1
Assembly Instructions 2/4
Attach 2X Magnets
to Front Rail (D) with Wood Screws.
Insert Cam Lock Screws into the pre-drilled holes
of Top (A), .Side Panel (B), (C) and (F)Plinth
Cam Lock Screw
F
D
Magnet
Wood Screw
B
C

STEP 3
Assembly Instructions 3/4
Figure 1
STEP 2
Attach Front Rail (D), Base (G)
and Plinth (F) to Side Panel (B)
with Cam Locks (see Figure 1).
Attach Side Panel (C) to
the unit with Cam Locks.
Slide Back Panel (E) into the unit.
Attach the Steel Plate connecter to the unit at the
pre-drilled holes, then tighten the Head Cap Bolts.
Cam Lock
B
C
D
F
G
E
Head Cap Bolt
Steel Plate connecter

Assembly Instructions 4/4
Figure 2 Figure 3
Figure 4
STEP 4
STEP 5
Adjustable Pin
Figure 5
Insert 6X Wood Screws from the back of the unit
and tighten. (See figure 6)
Note: Please make sure unit is level
before tightening these screws.
Figure 6
Wood Screw
Cam Lock A
J
H
I
Magnet
H
H
H
Assemble Pull Handles to Doors (I) and (J)
with Machine Screws. (See figure 3)
Attach 2X Magnets to the pre-drilled holes at
the base of unit. (See figure 4)
Place Top (A) onto the unit, using Cam Locks.
Attach Doors (I) and (J) by sliding the door
lift hinges into the side panel lift hinges.
(See figure 2)
Insert Adjustable Pins into side panels at the
desired level. (See figure 5)
Place Shelves (H) into position.