Seconique PRADO BED 4 6 User manual

PRADO BED 4'6"
ASSEMBLY INSTRUCTION
FOR DOMESTIC USE ONLY
IMPORTANT
PLEASE READ BEFORE YOU CONTINUE FURTHER
THE PRODUCTS YOU HAVE PURCHASED WILL GIVE YOU MANY YEARS OF SERVICE, IF
YOU FOLLOW THE GUIDELINES FOR ITS SAFE ASSEMBLY AND PERIODIC MAINTENANCE
AND CLEANING.
ASSEMBLE ON A SOFT CLEANING SURFACE.
DO NOT USE ANY TOOLS OTHER THAN THOSE SHOWN.
ANY SPANNERS OR ALLEN KEYS REQUIRED ARE INCLUDED WITH THE FITTINGS KIT.
DO NOT FOR ANY REASON USE A POWER TOOL TO ASSEMBLE THIS PRODUCT,ITS USE
WILL INVALIDATE ANY CLAIM YOU MAY HAVE AND COULD MAKE THIS PRODUCT
UNSAFE.
DEPENDING ON THE AMOUNT OF USE THIS PRODUCT RECEIVES IT MAY BE
NECESSARY TO TIGHTEN UP THE FIXINGS FROM TIME TO TIME, THIS IS COMPLETELY
NORMAL FOR ANY FLAT PACK FURNITURE. DO NOT OVERTIGHTEN FIXINGS.
FOR THE CLEANING, YOU MAY USE A DAMP CLOTH(NOT WET), DO NOT USE POLISH,
DETERGENT OR CHEMICAL CLEANER.
THIS PRODUCT MAY STAIN OR MARK IF ALLOWED TO COME INTO THE CONTACT WITH
WET OR DAMP OBJECTS.
THE SURFACE OF THIS ITEM IS NOT HEAT RESISTANT, ALWAYS USE A PLACE MAT
UNDER HOT OR COLD ITEMS TO PREVENT MARKINGS.

ASSEMBLY INSTRUCTION
IMPORTANT NOTE:
* PLACE ALL PARTS ON A CLEAN AND SMOOTH SURFACE,
SUCH AS A RUG OR CARPET TO AVOID THE PARTS FROM
BEING SCRATCHED.
*KINDLY FOLLOW THE ASSEMBLY INSTRUCTION STEP
BY STEP.

PART LIST:
P1 HEADBOARD 1PC P2 FOOTBOARD 1PC P3 SIDE RAIL 2PC
P4 DOUBLE 13PCS P5 CENTRE RAIL 1 PC P6 SUPPORT LEG 2PCS
PLASTIC CAP
P7 SLAT 26 PCS P8 SINGLE PLASTIC CAP 26PCS P9 FEET 4PCS
HARDWARE LIST:
A BOLT B SPRING C WASHER 24PCS D NUT 4PCS
5
16"*1" 12PCS WASHER 24PCS
E BOLT F BOLT G ALLEN KEY 1 PCS H SPANNER 1 PC
5
16"*1-3/4" 4PCS 5 16"*3" 4PCS

STEP 1 FIXING THE SUPPORT LEGS
TO CERNTRE RAIL
STEP 2 FIXING FEET TO THE
HEADBOARD AND FOOTBOARD
STEP 3 FIXING SIDERAIL TO HEADBOARD STEP 4 FIXING SIDERAIL TO FOOTBOARD
STEP 5 FIXING CENTRE RAIL TO
HEADBOARD&FOOTBOARD
STEP 6 FIXING PLASTIC CAPS AND SLATS
P5
AG
x2
CB
P3
P1
AG
x2
CB
P3
P2
P1
AG
CB
x2
x2
x4