Seconique RIMINI DINING CHAIR SEC/SH/04/23/PU1 User manual

RIMINI DINING CHAIR
ASSEMBLY INSTRUCTIONS
IMPORTANT
PLEASE READ BEFORE YOU CONTINUE FURTHER
THE PRODUCT YOU HAVE PURCHASED WILL GIVE YOU MANY YEARS OF
SERVICE IF YOU FOLLOW THE GUIDELINES FOR ITS SAFE ASSEMBLY
AND PERIODIC MAINTENANCE AND CLEANING.
ASSEMBLE ON A SOFT CLEAN SURFACE.
DO NOT USE ANY TOOLS OTHER THAN THOSE SHOWN.
ANY SPANNERS OR ALLEN KEYS REQUIRED ARE INCLUDED WITH THE
FITTINGS KIT.
DO NOT FOR ANY REASON USE A POWER TOOL TO ASSEMBLE THIS
PRODUCT. ITS USE WILL INVALIDATE ANY CLAIM YOU MAY HAVE AND
COULD MAKE THIS PRODUCT UNSAFE.
DEPENDING ON THE AMOUNT OF USE THIS PRODUCT RECEIVES IT MAY
BE NECESSARY TO TIGHTEN UP THE FIXINGS FROM TIME TO TIME.
THIS IS COMPLETELY NORMAL FOR ANY FLAT PACK FURNITURE.
DO NOT OVERTIGHTEN FIXINGS.
FOR CLEANING, YOU MAY USE A DAMP CLOTH (NOT WET). DO
NOT USE POLISH, DETERGENT OR CHEMICAL CLEANERS.
THE SURFACE OF THIS ITEM IS NOT HEAT RESISTANT. ALWAYS USE A
PLACE MAT UNDER HOT OR COLD ITEMS TO PREVENT MARKING.
SEC/SH/04/23/PU1
FOR DOMESTIC USE ONLY
DO NOT USE
!
Page 01
MAX CHAIR
WEIGHT
100KG

HARDWARE LIST
ABC
SEC/SH/04/23/PU1
Page 02
PARTS LIST
A
B
4PCS
4PCS
1PC
JCBC BOLTS (M70)
JCBC BOLTS (M40)
HARDWARE NAME QTY
REF
BEFORE YOU START ASSEMBLING.IF YOU DO FIND THAT
PLEASE CHECK THAT YOU HAVE ALL THE PARTS LISTED
PLEASE CONTACT YOUR SUPPLIER IMMEDIATELY.
SOMETHING IS MISSING.DO NOT CONTINUE ASSEMBLY.
Part Code
Part Number Part Description Quantity Carton
2
3
S400-402-081-PU1-01 Chair Back 11/1
Front Leg
Cushion Seat
S400-402-081-PU1-02
S400-402-081-PU1-03
2
1
1/1
1/1
JCBC BOLTS (M50)
D E
9PCS
9PCSSPRING WASHER
FLAT WASHER
1
3
F 1PCALLEN KEY
1
C
D
E
2
2

33
STEP 1
STEP 2
SEC/SH/04/23/PU1
Page 03
PARTS REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
B04
D04
2 - x2
FRONT LEG
PARTS REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
3 - x1
CUSHION SEAT
E04
2
B
ED
CC
3
1 - x1
CHAIR BACK
C01
D01
E01
C
D
E
1
FULLY TIGHTEN ALL BOLTS !!
DO NOT FULLY TIGHTEN THE BOLTS AT THIS STAGE !!
2
3

STEP 3
STEP 4
SEC/SH/04/23/PU1
Page 03
PARTS REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
A04
D04
PARTS REQUIRED
TOOLS REQUIRED
HARDWARE REQUIRED
E04
MAX CHAIR
WEIGHT
100KG
FULLY TIGHTEN ALL BOLTS !!
DO NOT FULLY TIGHTEN THE BOLTS AT THIS STAGE !!
A
D
E
After all parts have been loosely bolted
together, put the chair on the floor and make
it level. Finally tighten all bolts carefully.