Seg DTR 705 User manual

USER MANUAL
DTR 705
English
DVB-T Set-Top-Box
DTR 705

NOTE:
This equipment hasbeen tested and foundto comply withthe limits fora Class Bdigital device
pursuant to part15 of theFCC Rules. Theselimits are designed toprovide reasonable protection
against harmful interferencein a residentialinstallation. This equipmentgenerates, uses andcan
radiate radio frequencyenergy and, ifnot installed andused in accordancewith the instructions,
may cause harmfulinterference to radio communications.However, there isno guarantee that
interference will notoccur in aparticular installation. If thisequipment does causeharmful interference
to radio ortelevision reception, whichcan be determinedby turning theequipment off and
on, the useris encouraged totry to correctthe interference byone or moreof the followingmeasures:
- Reorient orrelocate the receivingantenna.
- Increase the separationbetween the equipment andreceiver.
- Connect theequipment into anoutlet on acircuit different from thatto which thereceiver is
connected.
- Consult thedealer or anexperienced radio/TV technician forhelp.
FCC and SafetyInformation
Important Safety Instructions
1. Read theseinstructions.
2. Keep theseinstructions.
3. Heed allwarnings.
4. Follow allinstructions.
5. Do not usethis apparatus near water.
6. Clean only witha damp cloth.Please unplugpower.
7. Do notblock any ofthe ventilation openings.Install in accordancewith the manufacturer’s
instructions.
8. Do notinstall near any heatsources such asradiators, heat registers, stoves,or other
apparatus (including amplifiers) thatproduce heat.
9. Do notdefeat the safety purposeof the polarized-type plug.A polarized plughas two blades
with one widerthan the other.The wide bladeis provided foryour safety. When theprovided
plug does notfit into youroutlet, consult an electricianfor replacement ofthe obsolete
outlet.
10. Protect thepower cord frombeing walked onor pinched particularlyat plug, convenience
receptacles, and thepoint where theyexit from theapparatus.
11. Only use attachments/accessoriesspecified by the manufacturer.
12. Use only witha cart, stand, tripod,bracket, or tablespecified by the manufactureror sold
with the apparatus. Whena cart is used,use caution when movingthe cart/apparatus
combination to avoid injuryfrom tip-over.
13. Unplug this apparatusduring lighting storms orwhen unused forlong periods oftime.
14. Refer all servicingto qualified service personnel.Servicing is required whenthe apparatus
has been damaged inany way; such aswhen the power-supply cordor plug isdamaged, liquid
has been spilledor objects havefallen into the apparatus,the apparatus has beenexposed to
rain or moisture,does not operatenormally, or hasbeen dropped.
FCC and Safety Information
A Class IIAPPARATUS shall bepermanently marked with thewords DOUBLE INSULATION or Double
insulated and hen servicing useonly identical replacementparts.
WARNING: To reducethe risk offire or electricshock, do notexpose this apparatus torain or
moisture. The apparatusshall not beexposed to drippingor splashing and thatno objects filled
with liquids, suchas vases, shallbe placed onthe apparatus.

Precautions
Please read theseprecautions before operatingthis unit.
Power cord protection
To avoid anymalfunctions of theunit, and toprotect against electric shock,fire or personal injury,
please observethe following.
Hold the plugfirmly when connectingor disconnecting theAC power cord.
Keep the ACpower cord awayfrom heating appliances.
Never put anyheavy object onthe AC powercord.
Do not attemptto repair orreconstruct the ACpower cord inany way.
Never make orchange connections withthe power switchedon.
Placement
Avoid placing theunit in areasof:
direct sunlight orheating radiators, orclosed automobiles
high temperature (over350C) or highhumidity (over 90%)
much dust asthe internal partsmay be seriouslydamaged.
Non-use periods
When the unitis not beingused, turn it off. When leftunused for along period of time, the unitshould
be unplugged fromthe household ACoutlet.
No fingers or other objects inside
Touching internal partsof this unitis dangerous, andmay cause seriousdamage to theunit. Do notatte
important to disassemblethe unit.
Do not putany foreign objectin this unit.
Keep away from water/magnet
Keep the unitaway from flowervases, tubs, sinks,etc. If liquidsare spilled into the unit, seriousdamage
could occur.
Never bring amagnet or magnetizedobject near theunit.
Stacking
Place the unitin a horizontalposition, and donot place anythingheavy on it.
Condensation
Moisture may formon the lensin the followingconditions:
immediately after aheater has beenturned on
in a steamyor very humidroom
when the unitis suddenly movedfrom a coldenvironment to awarm one
If moisture formsinside this unit,it may notoperate properly. Inthis case, turn on the powerand wait about
one hour forthe moisture toevaporate.
If there is noise interference on the TV while a broadcast is being received
Depending on thereception condition ofthe TV, interferencemay appear onthe TV monitor while you watch
a TV broadcastand the unitis left on.This is nota malfunction ofthe unit orthe TV. Towatch a TVbroadcast,
turn off theunit.
English
This symbol onthe product orin the instructionsmeans that yourelectrical and electronic
equipment should bedisposed at theend of itslife separately fromyour household waste.
There are separatecollection systems forrecycling in theEU. For moreinformation, please
contact the localauthority or yourretailer where youpurchased the product.

FCC and Safety Information
INTRODUCTION
Front panel
Rear panel
Remote control
SYSTEM CONNECTION
General about connections
Connection to theTV and videorecorder with SCART
Connecting a HiFiSystem
GETTING STARTED
WELCOME PAGE
System setup
INSTALLATION
Automatic channel scan
Manual channel scan
Aerial Adjustment
OPERATION
Accessing the favoritechannels
Access the ElectronicProgramme Guide(EPG)
CHANNEL
Channel list
Channel list menu
TV Channel list
Radio Channel list
Delete All Favorites
Delete All Channels
SYSTEM SET UP
System setup mainmenu
OSD Language
TV System
Start up Service
Region and Time
Timer Setting
OSD Setting
Parental Lock
TOOLS
Tools main menu
Information
Load Factory Default
Remote Control Help
1
1
2
3
3
3
4
4
5
5
6
13
13
14
15
15
16
17
17
18
18
19
19
7
7
8
8
9-11
11
12
12
CONTENTS

DTR 705
Front panel
Rear panel
Remote sensor
Standby button
Channel up
Channel down
Power indicator
Coaxial Digital Audio
TV Scart
for connection tothe TV
AUX Scart
for connection toa VCR
or a satellitereceiver
TV aerial
Loop through
for an externalTV aerial
RF
AC Mains
1
INTRODUCTION
RS232
AC220-240V
~50/60Hz
POWER SUPPLY: AC 220-240V~50/60Hz
POWER CONSUMPTION: 10WATTS
Art-Nr.:_________
Veseg GmbH, Ostring 60,
D-66740 Saarlouis-Fraulautern
DVB-T SET TOP BOX
DTR 705
Serial port
for connection toPC

MENUMENU
OKOK
DTV/ VCRDTV/ VCR
EXITEXIT
CH+CH+
CHCH
--
VOLVOL
--
VOL
+
VOL
+
PAUSEPAUSE FAVORITEFAVORITE
LANGLANG INFOINFO
RECALLRECALL
MUTEMUTE
TV/RADIOTV/RADIO AUDIOAUDIO
EPGEPG
XX
TTXTTX SUBTITLESUBTITLE
MENUMENU
OKOK
DTV/ VCRDTV/ VCR
EXITEXIT
CH+CH+
CHCH
--
VOLVOL
--
VOL
+
VOL
+
PAUSEPAUSE FAVORITEFAVORITE
LANGLANG INFOINFO
RECALLRECALL
MUTEMUTE
TV/RADIOTV/RADIO AUDIOAUDIO
EPGEPG
XX
TTXTTX SUBTITLESUBTITLE
Power On/Standby
(Switch the STBON/STANDBY mode)
Numeric entry
(Enter numeric valuesand to selectthe
channel directly byentering it's number)
Menu
(Open up menu)
Red Button (Forteletext function)
Page up
Cursor/ Enter
( to selectsub-menu from the
main menu andchannel +/-,
to select menuand sub-menu
from the menu and volume +/-,
Press to enter.)
Yellow Button
(For teletext function)
Mute
RECALL
(switch to previouschannel)
EPG
(Open up Electronic Program Guide
menu)
TTX
(Open Teletext function)
DTV/VCR
(Switch between TVand external input
through AUX scart)
EXIT
(Exit from menu)
Green Button (Forteletext function)
Page down
Blue Button
(For teletext function)
FAVORITE
(Open up Favouritelist)
PAUSE
INFO
(Press for currentchannel information)
LANG
(Select language forthe two ormore language
simultaneous programmes)
AUDIO
(Select audio: Left/ Right /Stereo/ Mono)
TV/RADIO
(Switch between TVand Radio)
SUBTITLE
(On/Off Subtitle)
8
9
11
10
12
13
15
14
1
2
3
4
5
6
7
1
2
3
4
7
5
6
11
12
13
14
15
10
8
9
16
17
18
19
20
21
16
17
18
19
20
21
2
INTRODUCTION

There are many different types ofTV/VCR and other equipment that you can
connect to the STB.In this manual you will see some of the most common
ways to connect your equipment.
General
4
SYSTEM CONNECTION
Connection to the TV and video recorder
with SCART
Video Cassette Recorder
VCR
TV
Scart cable
Scart cable
Antenna
R cable
F
RS232
Connecting a HiFi system
Hi-Fi
Coaxial cable
RS232
3
AC220-240V
~50/60Hz
POWER SUPPLY:AC 220-240V~50/60Hz
POWER CONSUMPTION:10 WATTS
Art-Nr.:_________
Veseg GmbH,Ostring 60,
D-66740 Saarlouis-Fraulautern
DVB-T SET TOP BOX
DTR 705
AC220-240V
~50/60Hz
POWERSUPPLY: AC 220-240V~50/60Hz
POWERCONSUMPTION: 10 WATTS
Art-Nr.:_________
VesegGmbH, Ostring 60,
D-66740 Saarlouis-Fraulautern
DVB-T SET TOP BOX
DTR 705

WELCOME PAGE
If you use the STB the first time or after you delete all channel information in the STB,the
"WELCOMOE PAGE" picture for quick shortcut menu will display .
WELCOME PAGE
OSD Language
Region
Tuner Power
Auto Scan
Main Menu
1
2
3
4
5
Press "1~5" numeric button to enter Region, OSD Language Tuner
Power, Auto Scan and Main Menu quickly.
Press to return.
System setup
Press the to enter the setup menu of the STB.
Press the to select "Setup" .
Press the to enter the sub-menu.
Press to select the desired
item and press to confirm.
Press to exit.
1
2
3
4
5
System Setup
Select Enter Exit OK MENU
OSD Language
TV System
Start up Service
Region and Time
Timer Setting
OSD Setting
Parental Lock
4
GETTING STARTED
Main Menu
Select Enter Exit
Channel
Tools
Installation
Setup
OK MENU
MENU
MENU
MENU

Automatic channel scan
Manual channel scan
Installation
Select Enter Exit OK MENU
Auto Scan
Channel Scan
Aerial Adjustment
Auto Scan
MENU
UHF 470.0~862.0 MHz Ch No.
Frequency 858.00 MHz FFT
Modulation GI
Exit
40%
TV Service Radio Service
The automatic search will start and the picture shown right is displayed.
Press to enter the setup menu of the STB.
Press to select "Installation".
Press to enter the sub-menu.
Select the "Channel Scan" and press , Channel
Scan menu appears
Press to select Scan mode,
Scan Band and Channel No. and highlight "Search",then press
to confirm .
1
2
3
4
5
Installation
Select Enter Exit OK MENU
Auto Scan
Aerial Adjustment
Channel Scan
Channel Scan
MENU
UHF 470.0~478.0 MHz
Frequency FFT
Modulation GI
Exit
40%
TV Service Radio Service
Your STB will start to scan the desired service or Frequency
and the picture shown right is displayed.
Press the to enter the setup menu of the STB.
Press to select "Installation".
Press to enter the sub-menu.
Select the "Auto Scan" and press , Auto Scan menu
appears
Press to select Scan mode
and highlight "Search",then press the to confirm .
1
2
3
4
5
Channel Scan mode: By channel
By frequency
5
Channel Scan
Select MENU
Mode
Scan Band
Ch No.
Search
Frequency
BandWidth
By Channel
UHF
21
000.000MHz
8 MHz
Change Exit 0-9 Input
Signal Intensity
Signal Quality
65%
90%
Main Menu
Select Enter Exit
Channel
Tools
Setup
Installation
OK
MENU
Installation
Auto Scan
Select MENU
Scan Mode
Search
All
Change Exit OK Enter
MENU
MENU

Press to enter the main menu of the STB.
Press to select "Installation".
Press the to enter the sub-menu.
Select the "Aerial Adjustment" and press , Aerial
Adjustment appears.
Press to select the desired channel No.
1
2
3
4
5
Aerial Adjustment
Installation
Select Enter Exit OK MENU
Auto Scan
Channel Scan
Aerial Adjustment
The signal intensity and quality for the desired channel will display as above.
When you adjust the location of aerial,use this menu to check signal intensity and quality of the
selected channel.
Aerial Adjustment
Change MENU
21
On
Exit
Signal Intensity
Signal Quality
65%
90%
Ch No.
Tuner Power
6
Main Menu
Channel
Tools
Setup
Installation
Select Enter Exit OK MENU
Installation
MENU

Accessing the favorite channels
Press to open up the "FAVOURITE LIST".
Press to select the desired favourite group.
Select the favourite channels and press to view the
selected channel.
1
2
3
Channel
Tools
Installation
System Setup
Favorite Group 1
0001 HN Radio2
0002 BBC NEWS 24
0003 BBC Text
0004 BBC Two
7
FAVORITE
Accessing the Electronic Program Guide (EPG)
Accessing the EPG of all channels:
1
2
3
4
Press to enter EPG menu .
Press to view the current selected in full screen.
Press the numeric button"1" to display all programs schedule
information of the selected channel as right.
Press the numeric button"2" to display the detail informations of
current channel.
EPG
Schedule
Detail 2
15/02/2006 14:29
Select Page Enter
OK
Exit MENU
1
14:05-14:55
BBC News
Theme: News
Rate:00
15:00-16:00
BBC News
Theme: News
Rate:00
0001 HN Radio2
0003 BBC Text
0004 BBC Two
0005 BBC CHOICE
0002 BBC NEWS 2
Detail 15/02/2006 14:29
Page Extend
Timer 2
BBC NEWS 24
13:00-15:00 BBC News
Bill Turnbull and Valerie Sanderson present
the news,with live reports from around the
world. Widescreen.
Exit MENU 1
Schedule
Detail 1
15/02/2006 14:29
Select Page
Enter
Exit MENU
OK
0002 BBC NEWS 24
15/02/2006
Timer 2
Date
5In schedule and detail menu,press numeric button "2" can open the timer menu directly. This operation can
add the highlighted program to a timer quickly.
EPG
OPERATION

Channel list
There are four ways of channel selection - stepping through the channel list, selection by number, from the
on-screen channel list, and using the electronic programme guide(EPG).
Stepping through the channel list:
To move through the channel list, press the upward arrow or downward arrow
key on the remote control.
Selection by number:
Enter the channel list number directly by remote control to select desired channel.
Selection by on-screen channels list:
You can also select the required channel directly from on-screen channel list. This is
displayed using the STB's main menu.
1
2
3
4Selection by EPG:
You can also select the required channel directly from electronic program guide (EPG).
For EPG details ,see previous page.
Channel list menu
Main Menu
Select Enter Exit
Tools
Installation
Setup
OK MENU
Channel
Channel
Select Enter Exit OK MENU
TV Channel List
Radio Channel List
Delete All Favorites
Delete All Channels
Press to enter the main menu of the STB.
Press to highlight channel.
Press to enter the sub-menu.
Press to highlight the desired item and press
to confirm .
Press to exit.
1
2
3
4
5
8
CHANNEL

TV Channel list
Enter Channel menu.
Press to highlight TV
channel list.
Press ,TV channel list appears.
Press to select channel group.
Press to preview the desired
channel
Press to view the selected channel in full screen.
1
2
3
4
5
6
Favorite
2
OK
MENU
1
TV Channel List
All Channel
0001 BBC CHOICE
0002 BBC NEWS 2
Preview
Move
3
Find
Select Page Enter Exit
4
Sort
5
Edit
Group
Favorite
Favorite
2
OK
MENU
1
TV Channel List
All Channel
0001 BBC CHOICE
0002 BBC NEWS 2
Preview
Move
3
Find
Select Page Enter Exit
4
Sort
5
Edit
Group
Favorite
Favorite 1
Favorite 2
Favorite 3
Favorite 4
Favorite 5
Favorite 6
Favorite 7
Favorite 8
In channel list menu, press numeric button "1" to setup Favorite
item.
Press to move highlight
between 8 favorite groups ,you can setup the desired channel to
the selected favorite group.
Press to confirm,a favorite mark will be added.
Press on the marked favorite group to cancel
favorite group,the mark will be cancel too.
Press to and return to Channel list menu.
1
2
3
4
Move
In channel list menu, press numeric button "2" , there will show a
"moving mark" in the right side of the selected channel.
Press to move the selected
channel to the position that you want to place
1
2
5
Favorite
2
OK
MENU
1
TV Channel List
All Channel
Preview
Move
3
Find
Select Page Enter Exit
4
Sort
5
Edit
Group
0001 BBC CHOICE
0002 BBC NEWS 2
Find
In channel list menu, press numeric button "3" to open Find menu.
Press to
highlight the letter or numeric and press to
input one by one.
After input each character, the program list on the left will search
the channel according your input, and list the matched channel.
Pressing to close "Find" and select
channel from the channels list directly.
1
2
3
4
Favorite
2
OK
MENU
1
TV Channel List
All Channel
0001 BBC CHOICE
0002 BBC NEWS 2
Preview
Move
3
Find
Select Page Enter Exit
4
Sort
5
Edit
Group
Find
ABCDEFG
HIJKLMN
OPQRSTU
VWXYZ12
3456789
0()@&-+
/
SP
?DEL OK
Use this menu to find a desired channel.
9
CHANNEL
EXIT
EXIT

TV Channel list (Continued)
Sort
Favorite
2
OK
MENU
1
TV Channel List
All Channel
0001 BBC CHOICE
0002 BBC NEWS 2
Preview
Move
3
Find
Select Page Enter Exit
4
Sort
5
Edit
Group
Sort
Default
Name(A-Z)
Name(Z-A)
FTA
Lockd
In channel list menu, press numeric button "4" to open "Sort"
menu.
Press to highlight sorting
way you want and Press to confirm.
1
2
Default:
Name (A-Z):
Name (Z-A):
FTA:
Locked:
Sorting by scanning result.
Sorting in Alphabetical Order.
Sorting in Alphabetical Order.
Sieving out all free fare channels.
Accumulating all locked channels and list in the
last of TV Channel List.
Edit
In channel list menu, press numeric button "5" to open channel
list edit menu.You will be asked to enter the password.The default
password is "0000".
.
Use this menu to delete ,skip,lock and edit channel list.
Favorite
21
TV Channel List
All Channel
No Signal!
Move
3
Find
Select Page
ok
Enter
4
Sort
5
Edit
Group
0679 SZTV-M
Input Password
----
Delete:
In "Edit Channel" menu, press numeric button "1" can make
a delete mark in the right side of the highlighted channel. After save
and exit "Edit Channel" menu, the marked channel will be
deleted.
Press "1" again to cancel delete channel.
Skip:
In "Edit Channel" menu, press numeric button "2" can make
a skip mark in the right side of the highlighted channel. After
save and exit "Edit Channel" menu, the marked channel will
be skip while you change the channel in full screen.
Press "2" button again to cancel the skip channel .
Lock:
In "Edit Channel" menu, press numeric button "3" can make a lock mark in the right
side of the highlighted channel. After save and exit "Edit Channel" menu, the marked
channel will be locked.STB will request you to input the password while you want to watch
the locked channel.
Press "3" button again to cancel the lock channel .
MENU
Exit
10
CHANNEL
Delete
2
MENU
1
Edit Channel
All Channel
0001 BBC CHOICE
0002 BBC NEWS 2
Skip
3
Lock
Select Page Exit
4
Edit
5
Del All
Group
Preview

TV Channel list (Continued)
Edit:
Edit Channel
All Channel
0001 BBC CHOICE
0002 BBC NEWS 2
Preview
Edit Channel
Name BBC ONE
Video PID
Audio PID
PCR PID
Save
Exit
Delete
21
Skip
3
Lock
Select Page
MENU
Exit
4
Edit
5
Del All
Group
160
82
160
Del All:
In "Edit Channel" menu, press numeric button "5" can mark all the channel with delete mark.
After save and exit , all channels are deleted.
Press number "5"button again to cancel Del All function..
Use edit to rename a channel.
In "Edit Channel" menu, press numeric button "4" to open
edit channel menu.Highlight name item and press
to confirm.The mock keypad will be showed.
Input letter and numeric one by one by pressing
and press to confirm.
After complete input,highlight "OK" on mock keypad to confirm,
you change the name of channel successfully.
After modification, highlight "Save" item and press
to save the modified value and exit "Edit"
mode.
Highlight "Exit" item and press to exit
"Edit" mode and won't save any modification.
"Video PID", "Audio PID" and "PCR PID" items are
grey and can not be edited.
NOTE:
Radio Channel list
Enter Channel menu.
Press to highlight Radio
channel list.
Press the ,Radio channel list appears.
Press to select channel group.
Press to preview channel
logo of the desired channel
Press to listen the selected radio channel .
1
2
3
4
5
6
Favorite
2
OK
MENU
1
Radio Channel List
All Channel
Preview
Move
3
Find
Select Page Enter Exit
4
Sort
5
Edit
Group
0001 BBC PARLMNT
NOTE:
Basically, the operationof "Radio Channel List" is sameas "TV
Channel List", butthere is onepoint different: In"Radio Channel
List" mode, thereis no videoinformation, so itwill always display
Radio's logo inthe right side preview window.
11
CHANNEL

Delete All Favorites
Delete All Channels
Enter Channel menu.
Press to highlight Delete
All Favorites item.
Press the ,you will be asked to input the
password.
Input the password using the numeric buttons,a warning
window is displayed.
1
2
3
4
5
Channel
Select Enter Exit OK MENU
TV Channel List
Radio Channel List
Delete All Channels
Delete All Favorites
Input Password
----
Warning! Do you really want
to delete all favorite channels?
Yes No
Highlight "Yes" to confirm,
Highlight"No" to cancel .
Use this menu to delete all favorite channels.
Enter Channel menu.
Press to highlight Delete
All channels item.
Press the ,you will be asked to input the
password.
Input the password using the numeric buttons,a warning
window is displayed.
1
2
3
4
5
Warning! Do you really want
to delete all channels?
Yes No
Highlight "Yes" to confirm,
Highlight"No" to cancel
Use this menu to delete all channels.
Channel
Select Enter Exit OK MENU
TV Channel List
Radio Channel List
Delete All Favorites
Delete All Channels
Input Password
----
12
CHANNEL

Many aspects of your STB can be set to reflect your circumstances and preference. The SETTINGS menu
screen is accessed from main menu.
System setup main menu
Use system menu to setup OSD Language, TV System, Start up
Service,Region and Time, Timer Setting, OSD Setting and
Parental Lock.
Press to enter the main menu of the STB.
Press to select "Setup".
Press to enter the sub-menu.
Press to highlight the
desired item and press to confirm .
Press to exit.
1
2
3
4
5
System Setup
Select Enter Exit OK MENU
OSD Language
TV System
Start up Service
Region and Time
Timer Setting
OSD Setting
Parental Lock
OSD Language
OSD Language
Select Change Exit MENU
OSD Language
First Audio
Second Audio
English
English
English
Use OSD Language to setup OSD Language , First Audio and
Second Audio language.
Enter "System Setup" menu, highlight "OSD Language".
Press ,the sub-menu appears.
Press to select the desired
item and press to setup the
desired language
Press to confirm.
1
2
3
OSD Language:
4
To select yourdesired OSD language.
First Audio: Some channels have more than one audio language for choosing; use this
function you can set the first audio for this channel. If the playing channel
has the same audio as the "First Audio" you set, system will play this audio
language as default. If the channel hasn't the suited audio language, then
the system will compare automatically with second audio language.
Second Audio: If the channel has no correspond audio with "First Audio" but have corres
ponded audio with "Second Audio", system will play the second audio l
anguage as default. If no audio language corresponds with the "Second
Audio", then the default language of current channel will
be played automatically.
13
Main Menu
Channel
Tools
Installation
Setup
Select Enter Exit OK MENU
MENU
MENU
SYSTEM SET-UP

TV System
Use this menu to setup Display Mode,Aspect Ratio.Dolby Digital,
Video Output and LCN Mode.
Enter "System Setup" menu, highlight "TV System".
Press ,the sub-menu appears.
Press to select the desired
item and press to setup the
desired selection.
Press to confirm.
1
2
3
TV System
Select Change Exit MENU
Display Mode
Aspect Ratio
Dolby Digital
Video Output
LCN Mode
Auto
4:3PS
Off
CVBS
Off
Display Mode:
4
TV System menu is to set up the broadcast system.
Aspect Ratio: Aspect Mode is used for switching the screen aspect ratio mode.
Auto
PAL
NTSC
Auto switch to TV System
PAL TV System
NTSC TV System
Auto
4:3PS
4:3LB
16:9
Auto switch to Aspect Ratio
4:3 Pan Scan
4:3 Letter Box
16:9 Wide Screen
Dolby Digital: Dolby Digital to set AC3 on or off.
Video Output: Video Output is use for switching the video output mode.
RGB
CVBS
Set to output RGB video signal
Set to output CVBS video signal
LCN Mode: If LCN (Logical Channel Number)Select function is activated,You can't change the
original number of TV channels by scanning .
On
Off
Activate "LCN Select" function if there is LCN for the TV station of the country.
Deactivate "LCN Select" function.
14
SYSTEM SET-UP

Start up Service
Use this menu to setup a start up service when you power on STB.
Enter "System Setup" menu, highlight "Start up Service".
Press ,the sub-menu appears.
Press to select the desired
item and press to setup the
desired selection.
Press to confirm.
1
2
3
Start up Service
Select Change Exit MENU
Boot on Service
Mode
Start up Service
On
TV
Boot on Service:
4
Set up Start up Service On/Off.
Start up Service: Set up a channel as Start up Service.
On
Off
Activate "Start up Service" function
Deactivate "Start up Service" function
Mode: Set up TV or Radio as Start up Service mode .
Region and Time
Use this menu to setup country and time.
Enter "System Setup" menu, highlight "Region and Time".
Press ,the sub-menu appears.
Press to select the desired
item and press to setup the
desired selection.
Press to confirm.
Press to exit.
1
2
3
GMT Usage:
4
This item is use for open the usage of GMT.There are three mode for using.
Off / User Define / By Region, press to switch.
GMT Offset: This item is valid only when the setting of "GMT Usage" is "Uesr Define".
Press to switch "GMT Offset" value. and the range is
"-12:00 ~ +12:00", increase each half hour progressively.
Date:
Time:
"Date" and "Time" items are valid only when the setting of "GMT Usage" is "Off".
Press to moving highlight and use number keys to
input directly.
Summer Time: This item is valid only when the setting of "GMT Usage" is "By Region".
Press to switch between "On" and "Off".
Time Display: This function can control whether the time will be displayed on screen or not.
Press to switch between "On" and "Off".
5
15
Region and Time
Select Change
Region
GMT Usage
Summer Time
Time Display
GMT Offset
Date
Time
France
By Region
Off
Off
GMT+01:00
05/10/2005
11:23
Exit MENU
Input Enter
0~9 OK
SYSTEM SET-UP
MENU

Timer Setting
Timer
Select Change Exit MENU
Current Date/Time
Timer Number
Timer Mode
Timer Service
Wakeup Channel
Wakeup Date
Wakeup Time
Duration
Off
Message
General
06/10/2005
03:10
01:00
1
06/10/2005 03:17
Input 0~9
For "Timer Service",if youselect Message,a remind message will appear at
setting timer. Press "OK"button to exit the message window.
Message mode:General/Birthday/Anniversary
Sleep Timer: You can set the STB to power off in 10 min,30min,
60min,90min and 120min automatically.
Sleep Timer
Change Exit MENU
Sleep Time Off
Load Default Timer Setting:
This function can clear all timer setting and return back to default timer setting.
If you enter this menu,you will be asked to input password
(the default password is "0000").
After input password, a confirmation window appears.
All Timers will be cleared,
continue?
NoYes
Highlight "Yes" or "No" and press"OK" to confirm or cancel.
Various time can be set, such as program time, Sleep time.
Enter "System Setup" menu, highlight "Timer Setting".
Press ,the Timer Setting menu appears.
Press to select the desired
item and press ,the sub-menu appears.
Press to highlight the desired
item and press to set up the
selection you want.
Press to exit.
1
2
3
4
Program Timer: This item is use for setting program timer you want
to change to.
When you want to exit program timer,a saving window appears
5
16
Time Setting
Select Enter Exit MENU
Program Timer
Sleep Timer
Load Default Timer Setting
OK
SYSTEM SET-UP
MENU