SEI FA938400TX User manual

FA938400TX –DARK TOBACCO
BRENTFORD MEDIA
FIREPLACE MANTEL
ASSEMBLY INSTRUCTION
For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-6 -5096
[e-mail]
www.seidal.com

BRENTFORD MEDIA FIREPLACE
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer.
Using a screw that is too long will cause damage.
Before beginning assembly, separate each type of screw. Carefully study the
screw diagrams below. You may receive extra hardware with your unit.
A Quantity
of 20
CAM BOLT
B Quantity
of 20
WOOD DOWEL(￠8* 0MM)
C Quantity
of 20
CAM LOCK
D Quantity
of 4
DOOR PULL
E Quantity
of 4
Long Bolt (5/ 2”* /4”)
F Quantity
of 8
SHELF PIN
G Quantity
of 2
MAGNETIC CATCH
H Quantity
of 4
HINGE
I Quantity
of 2
METAL PLATE
J Quantity
of 2
SCREW(￠8*25mm)
K Quantity
of 28
ROUND HEAD SCREW( *14mm)
L Quantity
of 26
FLAT HEAD SCREW( *14mm)
M Quantity
of 1
FIREBOX (IN SEPARATE CARTON)

1) Quantity
of 1
TOP PANEL
2) Quantity
of 1
MIDDLE SHELF PANEL
3) Quantity
of 1
LEFT SIDE PANEL
4) Quantity
of 1
RIGHT SIDE PANEL
5) Quantity
of 1
LEFT DIVIDED PANEL
6) Quantity
of 1
RIGHT DIVIDED PANEL
7) Quantity
of 1
BOTTOM PANEL
8) Quantity
of 2
ADJUSTABLE SHELF PANEL
9) Quantity
of 1
LEFT DOOR PANEL
10) Quantity
of 1
RIGHT DOOR PANEL
11) Quantity
of 2
BACK PANEL
12) Quantity
of 1
WOOD HOLDER
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
Call Customer Service at 1-800-6 -5096
Do not return product to store, please call
Manufacturer for assistance, questions or
Parts.
Assembly Tool Required
No.2 Phillips Screwdriver Not Included)

BRENTFORD MEDIA FIREPLACE
Assembly Instructions
Figure 1
Unpack and lay parts on clean,
padded surface like carpet or
blanket. Check that you have all
parts indicated on the front page
Insert cam locks (C) into predrilled
holes on left divided panel (5) & right
divided panel (6).
Screw cam bolt (A) into predrilled
holes on shelf panel (2).
Attach left divided panel (5) & right
divided panel (6) to shelf panel (2) by
inserting wood dowel (B) & cam bolt
(A) into corresponding predrilled
holes until left divided panel (5) &
right divided panel (6) & shelf panel
(2) meet.
Secure by rotating cam lock (C)
clockwise with Phillips screwdriver.
Repeat with left side panel (3) & right
side panel (4) & shelf panel (2) as
shown.
FIGURE 2
Insert cam locks (C) into predrilled
holes on pre-assembled unit in
figure 1
Screw cam bolt (A) into predrilled
holes on bottom panel (7).
Attach bottom panel (7) to
pre-assemble parts in figure 1 by
inserting wood dowel (B) & cam bolt
(A) into corresponding predrilled
holes until assemble parts in figure 1
& bottom panel (7) meet.
Secure by rotating cam lock (C) cl
ockwise with Phillips screwdriver.
B

BRENTFORD MEDIA FIREPLACE
Assembly Instructions
Figure 3
Insert cam locks (C) into predrilled
holes on pre-assembled unit in
figure 2
Screw cam bolt (A) into predrilled
holes on top panel (1).
Attach top panel (1) to pre-assemble
parts in figure 2 by inserting wood
dowel (B) & cam bolt (A) into
corresponding predrilled holes until
assemble parts in figure 2 & top
panel (1) meet.
Secure by rotating cam lock (C)
clockwise with Phillips screwdriver.
Insert the shelf pin (D) into the
pre-drilled hole on the cabinet side
panel and divided panel, and well put
the two adjustable shelf panels (8) on
it as shown.
Figure 4
1) Attach the right door panel (10) to
the unit by the door hinge (H) and
screw (L).
2) assemble the magnet catch (G)
under the shelf panel by screw
(K), then attach the metal plate (I)
on the up inside of door panel by
screw (L) to let it can match the
position of the magnet catch.
3) At last, tighten the door pull (D)
on the door panel by long bolt (E)
as shown.
4) Repeat the same way to
assemble the left door panel (9)
on the unit.
1
8
8
BC
F
9
10
K
D
I
L

BRENTFORD MEDIA FIREPLACE
Assembly Instructions
Figure 5
Attach the back panel (11) on the
pre-assembled unit by screw (K) as
shown.
Figure 6
Well put the fireplace (M) into the unit
and avoid any scratch.

BRENTFORD MEDIA FIREPLACE
Assembly Instructions
Figure 7
Assemble the wood holder (12) on
bottom panel by screw (J) as shown.
Figure 8
Now you can enjoy your new
fireplace.

Please immediately examine this product carefully. Any request for missing parts or damage replacement must be
received within 90 days of your receipt of the product. Replacement, if available, will be honored within this time
frame.Parts will not be available for items arriving fully assembled. We do not recommend modifying product(s)
and we are not responsible for any damages due to product modification(s). If damages or missing parts are not
reported within 90 days of your receipt, we are under no obligation to provide parts or replacement merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri Central
time if you have product issues or email us at [e-mail]. Please ask for customer service
representative for issues involving damages or replacement parts. Please ask for technical assistance
representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Parts Replacement Form
Customer Service 1-800-633-5096
[email protected]om
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019

CAUTION
The top shelf is intended for a flat screen television with a maximum overall width of 8”
and supports up to 85lb.
VCR shelf should not be loaded with more than 20 lb.
Each side shelf should not be loaded with more than 10 lb.
DO NOT EXCEED RECOMMENDED LOAD. Use with products heavier than the
maximum sizes and weights indicated may result in instability causing possible injury.
This unit contains a permanent warning sticker located on back panel.
Do not allow children under 16 years old to move the cart.
Model: FA9 8400TX –DARK TOBACCO
BRENTFORD MEDIA
FIREPLACE MANTEL
Southern Enterprises, Inc
600 Freeport Parkway, Suite 200
Coppell, Texas, 75019
Manufacture Date: