SEI FA982900TX User manual

FA982900TX
Townsend Fireplace Curio
-Espresso
Assembly Instructions
For assistance with assembly
,
contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
[email protected]
www.seidal.com

Townsend Fireplace Curio
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded
surface like carpet or blanket. Check that you have all parts indicated. Call customer service if hardware is
missing. Before beginning assembly, carefully study the diagrams below and sort your hardware according to the
pictures. Using the incorrect hardware will cause damage.
A Quantity
of 16
Wood Dowel (Ø5/16”*1-3/16”L)
B Quantity
of 16
Bolt (Ø1/4 ”*1-1/8”L)
CQuantity
of 16
Flat Washer
DQuantity
of
8
Shelf Pin
EQuantity
of 22
Round Head Screw (Φ3mm*12mmL)
F Quantity
of 12
Flat Head Screw (Φ3mm*12mmL)
G Quantity
of 1
Firebox (shipped in a separate carton)
H Quantity
of 2
Flat Head Screw (Φ5/16”*7/8”L)
I Quantity
of 1
Magnet Door Lock
J Quantity
of 2
Round Head Screw (Φ3mm*13.5mmL)
K Quantity
of 2
Nob (Φ1-3/16”*1”L)
L Quantity
of 2
Pan Head Bolt (Φ5/32”*1”L)
M Quantity
of 4
Plastic Cover
N Quantity
of 4
Screw (Φ7*5/8”L)
O Quantity
of 4
Bracket
P Quantity
of 4
Long Screw
(
Φ
7
*
1
”
L
)
Q Quantity
of 4
Wall Anchor
R Quantity
of 2
Plastic Strap

(1) Quantity
of 1
Top Panel
(2L) Quantity
of 1
Left
Upp
e
r
Frame
(2R) Quantity
of 1
Right Upper Frame
(3) Quantity
of 1
Left Door
(4) Quantity
of 1
Right Door
(5) Quantity
of 2
Adjustable Shelf Panel
(6) Quantity
of 1
Middle Shelf Panel
(7L) Quantity
of 1
Left Lower Frame
(7R) Quantity
of 1
Right Lower Frame
(8) Quantity
of 1
Bottom Panel
(9) Quantity
of 4
Leg
(10) Quantity
of 1
Back Panel
(11) Quantity
of 1
Wood Holder
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
Call Customer Service at 1-800-633-5096 for
assistance, questions or parts.
Assembly Tool Required
No.2 Phillips Screwdriver
(Not Included)

Townsend Fireplace Curio
Assembly Instructions
Figure 1
Attach 4pcs legs (9) to bottom panel
(8) by rotating the legs (9) clockwise
tightly with hand.
Figure 2
Attach left lower frame (7L) and right
downside frame (7R) to bottom panel
(8) by inserting 4pcs wood dowels
(A).
Use 4pcs bolts (B) through 4pcs flat
washers (C) to connect lower frames
(7L and 7R) to bottom panel (8).
Tighten bolts (B) with Phillips
screwdriver.
9
B
C
7L

Townsend Fireplace Curio
Assembly Instructions
Figure 3
Attach middle shelf panel (6) to lower
frames (7L and 7R) by inserting 4pcs
wood dowels (A).
Use 4pcs bolts (B) through 4pcs flat
washers (C) to connect middle shelf
panel (6) to lower frames (7L and
7R).
Tighten bolts (B) with Phillips
screwdriver.
Figure 4
Attach left upper frame (2L) and right
upper frame (2R) to the middle shelf
panel (6) by inserting 4pcs wood
dowels (A).
Use 4pcs bolts (B) through 4pcs flat
washers (C) to connect upper frames
(2L) and (2R) to the middle shelf
panel (6).
Tighten bolts (B) with Phillips
screwdriver.
Cover bolt holes with plastic covers
(M).
A
B
CB
7L
7R
6

Townsend Fireplace Curio
Assembly Instructions
Figure 5
Turn the top panel (1) over and use
2pcs round head screws (J) to
connect magnet (I) to top panel (1)
with Phillips screwdriver.
Figure 6
Attach top panel (1) to the upper
frames (2L) and (2R) by inserting
4pcs wood dowels (A).
Use 4pcs bolts (B) through 4pcs flat
washers (C) to connect the top panel
(1) to upper frames (2L) and (2R).
Tighten bolts (B) with Phillips
screwdriver.
Insert shelf pins (D) into
corresponding holes on upper frames
(2L) and (2R), then, place the two
adjustable shelf panels (5) on them
as shown.
I
1
J
1
5
5
B
C
A

Figure 7
Attach the back panel (10) onto the
back of the unit by using 22pcs
screws (E).
Figure 8
Use 2pcs pan head bolts (L) to
connect knobs (K) to door panels (3)
and (4) with Phillips screwdriver as
shown.
L
KK
L
34
10

Figure 9
Use 12pcs screws (F) to connect
door panels (3) and (4) to assembled
unit with Phillips screwdriver.
Figure 10
Place firebox (G) into the back of the
unit.
4

Townsend Fireplace Curio
Assembly Instructions
Figure 11
Attach wood holder (11) by
inserting 2pcs flat head screws
(H) into corresponding holes and
tighten with Phillips screwdriver.
Figure 12
Use screws (N) to connect
brackets (O) to the back of the
top panel (1) as shown. Tighten
screws (N) with Phillips
screwdriver.
Drill 1/4 inch pilot holes in near
proximity of the brackets (L) attached
to the top panel then tap the plastic
anchor (Q) into wall.
Use screws (P) to connect
brackets (O) to plastic anchors (Q) on
wall. Tighten screws (P) with Phillips
screwdriver.
Move this item closed to the fastened
wall brackets (O) and tie in both
brackets (O) with plastic straps (R) as
shown in diagram.
Now you can enjoy your new
fireplace.

Please examine this product carefully upon immediate receipt. Any request for missing parts or damage
replacement must be received within 90 days of your receipt of the product. Replacement, if available,
will be honored within this time frame.Parts will not be available for items arriving fully assembled. We
do not recommend modifying product(s) and we are not responsible for any damages due to product
modification(s). If damages or missing parts are not reported within 90 days of your receipt, we are
under no obligation to provide parts or replacement merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri
Central time if you have product issues or email us at [email protected]. Please ask for customer
service representative for issues involving damages or replacement parts. Please ask for technical
assistance representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity
Needed
Parts Replacement Form
Customer Service 1-800-633-5096
[email protected]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019