SEI BC9218R0TX User manual

For assistance with assembly contact:
Southern Enterprises, Inc.
Customer Service: 1-800-633-5096
[email protected]
www.seifurniturestore.com
BC9218R0TX -White
BC9318R0TX -Distressed Black
BC941800TX -Espresso
BC951800TX -Red
Bench w/Brown Rattan Baskets
Assembly Instructions
Max seat load: 300 lb.
PO#13488
Supports up
to 250 lb.

A Quantity
of 1
Left Side Frame
B Quantity
of 1
Right Side Frame
C Quantity
of 1
Bottom Panel
D Quantity
of 1
Front Brace
E Quantity
of 1
Seat Back
F Quantity
of 1
Divider
G Quantity
of 1
Seat panel
H Quantity
of 1
Back Panel
I Quantity
of 2
Basket Frame
J Quantity
of 2
Basket Bottom
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew the finish .
Avoid rubbing or scratching the surface with rough or
abrasive objects.
Call customer service at 1-800-633-5096 for assistance,
questions, or parts.
Assembly Tool Required:
No.2 Phillips Screwdriver (Not Included)
Bench With Brown Rattan Baskets
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean,
padded surface like carpet or a blanket. Check that you have all the parts indicated. Call customer service if any
hardware is missing. Before beginning assembly, carefully study the diagrams below and sort your hardware
according to the pictures. Using the incorrect hardware will cause damage.

1 Quantity
of 6
Bolt (1/4”x1-1/2”)
2 Quantity
of 12
Wood Dowel (Ø8x30mm)
3 Quantity
of 3
Wood Screw (8#x1-1/4”)
4 Quantity
of 10
Wood Plug
5 Quantity
of 2
Cam Locks
6 Quantity
of 1
Allen Wrench
7 Quantity
of 4
Bolt (1/4”x1-3/4”)
8 Quantity
of 4
T-nut
9 Quantity
of 2
Cam Locks
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew the finish. Avoid
rubbing or scratching the surface with rough or abrasive
objects.
Call customer service at 1-800-633-5096 for assistance,
questions, or parts.
Assembly Tool Required:
No.2 Phillips Screwdriver (Not Included)
B
ench
w/
B
rown
R
attan
B
askets
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded surface
like carpet or a blanket. Check that you have all the parts indicated. Call customer service if any hardware is missing.
Before beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures.
Using the incorrect hardware will cause damage.

Figure 1
Connect Bottom Panel (C) and
Divider (F) with Wood
Dowels (2) and Wood Screw (3).
Tighten screw with screwdriver (not
included).
Figure 2
Insert Back Panel (H) into the
grooves in the bottom Seat Back (E)
and the rear of Bottom Panel (C).
Figure 3
Attach Left Side Frame (A), Right
Side Frame (B), and Front Brace (D)
to the assembled unit from Figure 2
with Wood Dowels (2), Bolts (1/7)
and T-nuts (8).
Note: T-nuts are inserted into their
respective holes in the rear of Seat
Back (E). Bolts (7) are then
inserted through Side Frames
(A/B) and into the T-nuts (8).
Tighten bolt with Allen Wrench (6).
B
ench
w/
B
rown
R
attan
B
askets
Assembly Instructions
3
2
F
C
2
H
E
C
2
2
2
2
7
B
H
D
2
2
2
2
1
7
7
EC
8
1
1
1
1
1
A
the large groove is the back of the panel
the large groove is the back of the panel

Figure 4
Insert Cam Locks (C) into holes
on pre-assembled unit from Figure 3.
Screw Cam Bolts (A) into holes on
Seat Panel (G).
Attach Seat Panel (G) to
pre-assembled unit from Figure 3 by
inserting Wood Dowels (2) and Cam
Bolts (9) into corresponding holes
until panels meet.
Tighten by rotating Cam Locks (5)
clockwise with Phillips screwdriver
(not included).
Attach the Seat Panel (G) to the
pre-assembled unit with Screw (3)
Tighten screws with screwdriver (not
included).
Figure 5
Insert the Basket Base (J) into the
Basket Frame (I).
Figure 6
Cover the holes on the legs with
Wood Plugs (4). Place the baskets
into their positions.
Now your Bench w/Brown Rattan
Baskets is ready for use!
B
ench
w/
B
rown
R
attan
B
askets
Assembly Instructions
4
4
4
4
4
4
4
4
4
3
3
5
2
2
G
5
9

Parts Replacement Form
Please immediately examine this product carefully. Any request for missing parts or damage replacement must
be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this
time frame.Parts will not be available for items arriving fully assembled. We do not recommend modifying
product(s) and we are not responsible for any damages due to product modification(s). If damages or missing
parts are not reported within 90 days of your receipt, we are under no obligation to provide parts or replacement
merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri Central
time if you have product issues or email us at servi[email protected]. Please ask for customer service
representative for issues involving damages or replacement parts. Please ask for technical assistance
representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Parts Replacement Form
Customer Service 1-800-633-5096
[e-mail]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019