SEI MS986500TX User manual

MS986500TX
“Dynasty” TV/Media Stand
Espresso Finishing
Assembly Instructions For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
[email protected]
www.seidal.com

“
Dynasty” TV/Media Stand
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer.
Hardware shown actual size. Using hardware that is too long will cause damage.
Before beginning assembly, separate each type of hardware. Carefully study the hardware
diagrams below (SHOWN ACTUAL SIZE). You may receive extra hardware with your unit
B
Quantity
of 1 Quantity
of 1
Quantity
of 1
A C
Top Panel Left Middle Panel Right Middle Panel
E
Quantity
of 1 F
Quantity
of 1
D
Quantity
of 1
Bottom PanelLeft Side Panel Right Side Panel
H
Quantity
of 4 I
Quantity
of 1
G
Quantity
of 1
Leg Back PanelApron Frame
K
Quantity
of 1
L
Quantity
of 1
J
Quantity
of 1
Left Middle Door
Left Door Right Door
N O
Quantity
of 2 Quantity
of 1
M
Quantity
of 1
Side Shel
f
Middle Shel
f
Right Middle Door

“
Dynasty” TV/Media Stand
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer.
Hardware shown actual size. Using hardware that is too long will cause damage.
Before beginning assembly, separate each type of hardware. Carefully study the hardware
diagrams below (SHOWN ACTUAL SIZE). You may receive extra hardware with your unit
(3)(1) (2) Quantity
of 24
Quantity
of 16 Quantity
of 2
8mm x 30 mm
Wood Dowel Single Magnet
1/4
”
x 1
”
Bolt
Quantity
of 1
(4) (5)
Quantity
of 10 (6)
Quantity
of 8
3.5mm x 15 mm
Screw For Magnet
Double Magnet Washer
(8)
Quantity
of 1 (9)
Quantity
of 16
Quantity
of 8
(7)
3.5mm x 12 mm
Screw For Back1/4” x 1-1/2” Allen Bolt Allen Wrench
(11)
Quantity
of 1 (12)
Quantity
of 4
Quantity
of 24
(10)
5/32” x 22mm
Bolt For Handle
3.5mm x 12 mm
Screw For Door
Metal Handle
Quantity
of 12
(13)
Metal Pin
Assembly Tool Required
No. 2 Phillips Screwdriver
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
call Customer Service at 1-800-633-5096.
Do not return product to store. Please call
manufacturer for assistance, questions or
parts.
Assembly Tool Required
No. 2 Phillips Screwdriver
(Not Included)

“
Dynasty” TV/Media Stand
Assembly Instructions
Assembly Instructions:
Wood may scratch easily. Be careful
when assembling. Do not scratch.
Step 1. Unpack and lay parts on
clean, padded surface like
carpet or blanket. Check that
you have all parts indicated
on the front page.
Step 2. Put the Top Panel (A) on the
soft working surface.
Step 3. Attach the Single Magnet(3)
and Double Magnet(4) to the
Top Panel(A) with Screw For
Magnet(5), then fasten them.
Quantity
of 2
(3)
Single Magnet Quantity
of 1
(4)
Double Magnet Quantity
of 10
(5)
3.5mm x 15mm
Screw For Magnet
Fi
g
ure 1
Step 1. Insert the Wood Dowels(1) into
predrilled holes in Top Panel(A).
Step 2. Attach Middle Panels(B,C) and
Right side Panel(E) to the
Top Panel(A) with Bolt(2),
then fasten them.
Quantity
of 8
(1)
8mm x 30 mm
Wood Dowel
Quantity
of 6
(2)
Fi
g
ure 2 1/4” x 1” Bolt

“
Dynasty” TV/Media Stand
Assembly Instructions
Step 1. Insert the Wood Dowels(1) into
predrilled holes in Bottom
Panel(F) and Middle Panels(B,C)
as pictured.
Step 2. Attach the Bottom Panel(F) to
the Right Side Panel(E) and
Middle Panels(B,C).
8mm x 30 mm
Wood Dowel
Quantity
of 6
(1)
Fi
g
ure 3
Step 1. Insert the Wood Dowels(1) into
predrilled holes in Bottom
Panel(F).
Step 2. Attach Left Side Panels(D) to
the Top Panel(A) and Bottom
Panel (F) with Bolt(2), then
fasten them.
Quantity
of 2
(1)
8mm x 30 mm
Wood Dowel
Quantity
of 10
(2)
Fi
g
ure 4 1/4” x 1” Bolt
(2)
1/4” x 1” Bolt
Quantity
of 8
Step 1. Attach Apron Frame (G) as
Picture with Bolt(2), then fasten
them.
Fi
g
ure 5

“
Dynasty” TV/Media Stand
Assembly Instructions
Step 1. Put the Washer(6) into Allen
Bolt (7), attach the Legs(H) into
corner block with Allen Bolt (7)
by Allen Wrench(8), Then fasten
them.
(6)
Washer
Quantity
of 8
(7)
1/4” x 1-1/2” Allen Bolt
Quantity
of 8
(8)
Allen Wrench
Quantity
of 1
Fi
g
ure 6
Step 1. Attach the Back Panel(I) as
pictured with Screw For Back(9),
then fasten them.
Quantity
of 16
(9)
3.5mm x 12mm
Screw For Door
Fi
g
ure 7
Step 1. Attach Left Door(J) to Left
Middle Panel(B) with Screw For
Door(10), then fasten them.
Step 2. Attach Right Door(K) to Right
Middle Panel(C) with Screw For
Door(10), then fasten them.
Quantity
of 12
(10)
3.5mm x 12mm
Screw For Door
Fi
g
ure 8

Fi
g
ure 10
Fi
g
ure 9
“
Dynasty” TV/Media Stand
Assembly Instructions
Step 1. Attach Left Middle Door(L) to
Left Middle Panel(B) with Screw
For Door(10), then fasten them.
Step 2. Attach Right Middle Door(M) to
Right Middle Panel(C) with Screw
Step 3. Attach Handle(11) to Doors(L,M)
with Bolt For Handle(12).
(13)
(11)
5/32” x 12mm
Bolt For Handle
Quantity
of 4
Metal Handle
Quantity
of 1
(12)
Quantity
of 12
(10)
3.5mm x 12mm
Screw For Door
Step 2. Put the Shelves (N,O) above
the Metal Pins(13).
Panels (D,E) and Middle
Panels(B,C).
Step 1. Insert Metal Pins(13) to Side
Quantity
of 12
Metal Pin
For Door(10), then fasten them.

Customer Service 1-800-633-5096
[email protected]
Southern Enterprises, Inc.
2915 Merrell Road
Dallas, Texas 75229
MS986500TX
Parts Replacement Form
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Lette
r
Parts Description
Quantity Needed
Missing or damaged hardware and/or parts will be replaced free of charge. We do not sell parts.
Southern Enterprises Inc. Will provide replacement parts for only those items purchased within the last
9 months. If this product has not been purchased from our retail affiliates (within 9 months), we are
under no obligation to provide parts or replacement merchandise. Parts will not be available for items
arriving fully assembled. Parts will be sent if available from SEI.

1970 Crown Drive
Manufacture Date: 09/25/2008
Southern Enterprises, Inc
DO NOT EXCEED RECOMMENDED LOAD. Use with products heavier than the
maximum sizes and weights indicated may result in instability causing possible
injury.
This unit contains a permanent warning sticker located on under side of top shelf
or inside drawer.
Do not allow children under 16 years to move the cart.
Model: MS986500TX
“Dynasty” TV/Media Stand
The top shelf is NOT INTENDED for tube televisions.
Each center shelf should not be loaded with more than 20 lb. Each side shelf
should not be loaded with more than 15 lb.
CAUTION
The top shelf of this cabinet is intended for plasma/LCD televisions having a
maximum screen size of 46” and weight of 175 lb.