SEI BC4013 User manual

Shoe Bench With Baskets
Max Load: 250 LB
Assembly Instructions
Southern Enterprises, Inc.
Customer Service 1-800-633-5096
For assistance with assembly contact:
www.seidal.com
[e-mail]
SEI ITEM NO BC4013

Please review all parts and hardware before disposing of any packaging.
Using a screw that is too long will cause damage.
hardware with your unit.
the screw diagrams below. You may receive extra
Before beginning assembly, separate each type of screw. Carefully study
Call Customer Service if missing hardware. Do not return to store/retailer.
FOOT
RIGHT CROSS - PANEL
of 4
Quantity
FEET N
LEFT STAND PANEL
KJ
BACK PANEL
M
LEFT CROSS - PANEL
E
B
BOTTOM PANEL
HG
TOP PANEL
A
RIGHT FACING PANEL
D
CUSHION
of 3
Quantity Quantity
of 3
O
L
RIGHT STAND PANEL
MIDDLE CROSS - PANEL
LEFT FACING PANEL
C
F
I
Parts List
Shoe Bench With Baskets

Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
surface with rough or abrasive objects.
Assembly Tool Required
No.2 Phillips Screwdriver
the finish. Avoid rubbing or scratching the
parts.
manufacturer for assistance, questions or
Do not return product to store, please call
For replacement parts or questions, please
Call Customer Service at 1-800-633-5096
DOWELS
(5)
CAM-TOOL
(2)
Quantity
of 16
(7)
COTTON MAT
Quantity
of 24
Quantity
of 1
(3) Quantity
of 28 (4) of 28
Quantity
CAM-BOLTS CAM-LOCKS
(6) Quantity
of 12
SCREWS
SCREWS
O P of 3
Quantity
Quantity
of 3 of 24
Quantity
(1)

Insert the cross - panel (P) into slot
method as the left cross - panel (E) with
dowels (2).
and right cross - panel (G) by the same
NOTE: Attach the middle cross - panel (F)
stand panel (O) and left cross - panel
Insert the 2 dowels (2) into holes in
in stand panel (O).
(E).
E
O
P
Figure 2
Wood may scratch easily. Be careful when
assembling.
bottom panel (B).
Assembly Instructions:
surface like carpet or blanket.
Unpack and lay parts on clean, padded
Rotate the 5 feet (J/K) into holes in
K
J
B
Figure 1
Shoe Bench With Baskets
Assembly Instructions

Figure 4
Figure 3
cross - panel (P).
Rotate the 4 cam-bolts (3) into holes in
P
F
E
(2) I
H
Place the cam-bolts (3) into holes in
stand panel (H/I).
cam-locks (4).
panel (F) and attach using
Rotate the 4 cam-bolts (3) into holes in
panel (E) and attach using cam-locks (4).
cross - panel (P).
panel (H).
P
Insert the 4 dowels (2) into holes in
Insert the 4 dowels (2) into holes in
(2)
(4)
H
E
Place the cam-bolts (3) into holes in
left facing panel (C) and left stand
ARROW
(4) (3)
ARROW (5)