SEI Artisan BC946100TX User manual

For assistance with assembly, contact:
Southern Enterprises Inc.
customer service 1-800-633-5096
[e-mail]
www.seidal.com
BC946100TX
Artisan Storage Bench
Assembly Instructions
PO#:

Artisan Storage Bench
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean,
padded surface like carpet or blanket. Check that you have all parts indicated. Call customer service if hardware is
missing. Before beginning assembly, carefully study the diagrams below and sort your hardware according to the
pictures. Using the incorrect hardware will cause damage.
A.
Quantity
of 1
top panel
B.
Quantity
of 1
apron back panel
C.
Quantity
of 2
apron side panel
D.
Quantity
of 1
right side frame
E.
Quantity
of 1
left side frame
F.
Quantity
of 1
fixed shelf
G.
Quantity
of 1
front panel
H.
Quantity
of 1
front bottom rail
I.
Qu
antity
of 2
back rail
J.
Quantity
of 1
back panel
K.
Quantity
of 1
drawer front panel
L.
Quantity
of 1
drawer left side panel

M.
Quan
tity
of 1
drawer right side panel
N.
Quantity
of 1
drawer back panel
O.
Quantity
of 1
drawer bottom panel
P.
Quantity
of 1
seat cushion
1.
Quantity
of 10
wood dowel ø8*30mm
2.
Quantity
of 32
cam bolt
3.
Quantity
of 32
cam lock
4.
Quantity
of 2
drawer bolt ø6 x 23mm
5.
Quantity
of 12
round head screw ø1/8”
x 1/2”L
6.
Quantity
of 2
short bolt ø1/4” x 7/8”L
7.
Quantity
of 5
bolt ø1/4” x 31-1/2”
8.
Quantity
of 1
spring hinge - left
9.
Quantity
of 1
spring hinge - right

10.
Quantity
of 8
Flat head screw ø1/8” x 5/8”
11.
Quantity
of 1
handle
12.
Quantity
of 2
bolt for handle
ø5/32 x 1/2”
13.
Quantity
of 10
sticker cover
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish.Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questi
ons, please
call customer service at 1-800-633-5096.
Assembly Tool Required No.2 Phillips
Screwdriver (Not Included)

Figure 1
Connect apron back panel (B) to apron
side panels (C) with bolts (6) and wood
dowels (1).
Tighten bolts (6) with phillips
screwdriver.
Figure 2
Connect assembled unit to top panel (A)
with bolts (7) and wood dowels (1).
Tighten bolts (7) with phillips
screwdriver.
Artisan Storage Bench
Assembly Instructions

Figure 3
Insert cam locks (3) into holes on drawer
back panel (N). Screw cam bolts (2) into
holes on drawer left side panel (L) and
drawer right side panel (M).Attach
drawer left side panel (L) and drawer
right side panel (M) to drawer back
panel (N) by inserting cam bolts (2) into
corresponding holes until they meet.
Tighten by rotating cam locks (3)
clockwise with phillips screwdriver.
Figure 4
Slide drawer bottom panel (O) into the
grooves of drawer right side panel (M),
drawer left side panel (L), and drawer
back panel (N).
Artisan Storage Bench
Assembly Instructions

Figure 5
Insert cam locks (3) into holes
on assembled unit.
Screw cam bolts (2) into holes on
drawer front panel (K). Attach
assembled unit to drawer front panel (K)
by inserting cam bolts (2) into
corresponding holes until they meet.
Tighten by rotating cam locks (3)
clockwise with phillips screwdriver.
Figure 6
Attach handle (11) to drawer front panel,
with bolts (12).
Tighten bolts (12) with phillips
screwdriver as shown.
Cover cam lock holes with sticker covers
(13).
Artisan Storage Bench
Assembly Instructions

Figure 7
Insert cam locks (3) into holes on
underside of fixed shelf (F).
Screw cam bolts (2) into holes on front
panel (G).
Attach front panel (G) to fixed shelf (F)
by inserting cam bolts (2) into
corresponding holes until front panel (G)
and fixed shelf (F) meet.
Tighten by rotating cam locks (3)
clockwise with phillips screwdriver.
Figure 8
Insert cam locks (3) into holes
on assembled unit, back rail (I), and
front rail (H).
Screw cam bolts (2) into holes of right
leg frame (D).Attach assembled unit,
back rail (I), and front bottom rail (H) to
right leg frame (D) by inserting wood
dowels (1) and cam bolts (2) into
corresponding holes until they meet.
Tighten by rotating cam locks (3)
clockwise with phillips screwdriver.
Artisan Storage Bench
Assembly Instructions

Figure 9
Repeat the steps on figure 8 to attach
left side frame (E) to the assembled unit.
13
3
3
3
13
2
Figure 10
Insert cam locks (3) into holes on
assembled unit.
Screw cam bolts (2) into holes on
underside of top panel (A).Attach top
panel to assembled unit by inserting
wood dowels (1) and cam bolts (2) into
corresponding holes until they meet.
Tighten by rotating cam locks (3)
clockwise with phillips screwdriver.
Cover cam lock holes with sticker covers
(13).
Artisan Storage Bench
Assembly Instructions

Figure 11
Connect back panel (J) to assembled
unit on as shown using screws (5).
Tighten screws (5) with phillip
screwdriver.
Figure 12
Open the top panel as shown.
Attach spring hinge-left (8) and spring
hinge-right (9) to the top panel and
bench base with screws (10).
Tighten screws with phillips screwdriver
.
Artisan Storage Bench
Assembly Instructions

Figure 13
Screw drawer bolts (4) into holes on side
leg as shown.
Attach assembled drawer box into
assembled unit on as shown.
Make sure the bolts (4) holds the drawer
box stably.
Figure 14
Place seat cushion (P) on top panel as
shown.
Artisan Storage Bench
Assembly Instructions

Figure 15
Now your new Artisan storage
bench is ready to use.
Artisan Storage Bench
Assembly Instructions

Please immediately examine this product carefully. Any request for missing parts or damage replacement
must be received within 90 days of your receipt of the product. Replacement, if available, will be honored
within this time frame.Parts will not be available for items arriving fully assembled. We do not recommend
modifying product(s) and we are not responsible for any damages due to product modification(s). If
damages or missing parts are not reported within 90 days of your receipt, we are under no obligation to
provide parts or replacement merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri
Central time if you have product issues or email us at serv[email protected]. Please ask for customer service
representative for issues involving damages or replacement parts. Please ask for technical assistance
representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Parts Replacement Form
Customer Service 1-800-633-5096
[e-mail]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019
Page 4
Page11