SEI VM5061C User manual

For assistance with assembly contact:
Southern Enterprises, Inc.
Customer Service 1-800- 33-509
[e-mail]
www.seidal.com
VM50 1C "BURGUNDY CHERRY"
VM50 2C "FROSTY WHITE"
VM50 4 "PLANTATION OAK"
VM50 5 "WARM BROWN WALNUT"
JS50 “BLACK”
WALL MOUNT JEWELRY MIRROR
Assembly Instructions
Page 1
Please find hardware in red plastic bag before discarding packaging materials.

A Quantity of 1
ARMOIRE
B Quantity of 1
compartment box
(1) Quantity of 3
WOOD SCREW
(2) Quantity of 3
WALL ANCHOR
(3) Quantity of 2
KEY
(4) Quantity of 1
LEVEL
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
Call Customer Service at 1-800- 33-509
, please call Manufacturer for assistance, questions
or Parts.
Assembly Tool Required
No.2 Phillips Screwdri er
(Not Included)
Tool List: 3/16" drill bit, drill, tape measure and pencil.
WALL-MOUNT JEWELRY MIRROR
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware.
Using a screw that is too long will cause damage.
Before beginning assembly, separate each type of screw. Carefully study the
screw diagrams below. You may receive extra hardware with your unit.
Page 2

Figure 1
Assembly Instructions:
Step 1
Unpack and lay parts on clean, padded
surface like carpet or blanket. Check that you
have all parts indicated on the front page.
Step 2
Find a desired location. Mark 3 locations for
screws on wall.
Step3
Drill two 3/1 " hole. The distance between
the three holes must be the same as figure 1
shows. One screw must be attached directly
into a wall stud. Wall anchor is not needed
when mounting to wall stud
Insert plastic anchors (2) into the 2 drilled
holes on wall as shown. (When doing this, you
will need a hammer help you).
Figure 2
Step 4
With an assistant, insert 3 screws (1) through
Mount Jewelry Mirror (A) and into plastic
anchor (2). Tighten all screw (1) using Phillips
head screwdriver (not included).
Step 5
Place levels on top of unit to make sure
product is level.
WALL-MOUNT JEWELRY MIRROR
Assembly Instructions
Page 3
9.7”
44.2” 44.2”
(2)
A
(1)
9-3/4"
44-1/4" 44-1/4"

Figure 3
Step
If the door rubs against the casing frame,
please loosen the screws on the door hinges
and readjust accordingly (as shown in
Figure 3)
Figure 4
Step 7
Put the compartment box (B) on the inside of
the unit.
Now your WALL MOUNT JEWELRY MIRROR is
ready for use.
WALL-MOUNT JEWELRY MIRROR
Assembly Instructions
(B)

Please immediately examine this product carefully. Any request for missing parts or damage replacement must
be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this
time frame.Parts will not be available for items arriving fully assembled. We do not recommend modifying
product(s) and we are not responsible for any damages due to product modification(s). If damages or missing
parts are not reported within 90 days of your receipt, we are under no obligation to provide parts or replacement
merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri Central
time if you have product issues or email us at [e-mail]. Please ask for customer service
representative for issues involving damages or replacement parts. Please ask for technical assistance
representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Parts Replacement Form
Customer Service 1-800-633-5096
[e-mail]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019
Page 4