SEI HE4012 User manual

Southern Enterprises, Inc.
Customer Service 1-800-633-5096
For assistance with assembly contact:
Max Load:
SEI ITEM NO HE4012
Assembly Instructions
Wall Storage With Bins and Baskets
www.seidal.com
[email protected]

BOLTS
Quantity
Quantity
M
J
of 3
DOWN REAR PANEL
UP STAND PANEL
of 2
DOWN CROSS - PANEL
G
SUPPORT
N
LK
IH
of 3
Quantity
BACK PANEL
Quantity
of 2
UP REAR PANEL
Quantity
of 2
DOWN STAND PANEL
UP CROSS - PANEL FRONT PANEL
of 4
Quantity
(1)
Wall Storage With Bins and Baskets
Please review all parts and hardware before disposing of any packaging.
the screw diagrams below. You may receive extra
Using a screw that is too long will cause damage.
Before beginning assembly, separate each type of screw. Carefully study
Call Customer Service if missing hardware. Do not return to store/retailer.
BOTTOM PANEL
A
D
Parts List
E
LEFT FACING PANEL
C
hardware with your unit.
B
F
RIGHT FACING PANEL

parts.
Assembly Tool Required
No.2 Phillips Screwdriver
DOWELS
Do not return product to store, please call
manufacturer for assistance, questions or
For replacement parts or questions, please
Call Customer Service at 1-800-633-5096
(11)
SCREWS
Quantity
of 12
NUTS
COTTON MAT
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
surface with rough or abrasive objects.
the finish. Avoid rubbing or scratching the
ANCHOR
(10)
CAM-LOCKS
Quantity
of 4
(9)
Quantity
of 29
(8) SCREWS
(7)
Quantity
of 2
(6)
ALLEN WRENCH
Quantity
of 1
(5) Quantity
of 1
(3) Quantity
of 33 (4)
CAM-TOOL
CAM-BOLTS
(2)
Quantity
of 2
Quantity
of 2
of 33
Quantity

Wall Storage With Bins and Baskets
Figure 2
J
A
Figure 1
F
D
Place the cam-bolts (3) into holes in
panel (D) and attach using
cam-locks (4).
cam-locks (4).
panel (J) and attach using
Place the cam-bolts (3) into holes in
bottom panel (A).
Rotate the 2 cam-bolts (3) into holes in
Rotate the cam-bolts (3) into holes in
front panel (F).
Assembly Instructions
Assembly Instructions:
surface like carpet or blanket.
assembling.
Wood may scratch easily. Be careful when
Unpack and lay parts on clean, padded
ARROW
(4) (3)
ARROW (5)

Place the cam-bolts (3) into holes in
bottom panel (B) and cross - panel (E).
Rotate the 8 cam-bolts (3) into holes in
cam-locks (4).
panel (G/H) and attach using
Figure 4
A
E
G
H
Figure 3
Place the cam-bolts (3) into holes in
cam-locks (4).
Rotate the 8 cam-bolts (3) into holes in
down cross - panel (D).
panel (G/H) and attach using
D
H
H
G
G

Figure 6
Figure 6
K
Attach the support (K) to rear
panel (I/J) using 4 bolts (1).
Attach the wicker bottom (M) to wicker
frame (N) using 4 screws (11).
M
N
J
I
rear panel (I/J).
B
HOW TO USE THE ALLEN WRENCH
Insert the 4 nuts (9) into holes in
B
Figure 5
I
2
front panel (F).
Insert the 2 dowels (10) into holes in
into slot in side panel (B/C).
L
A
9
1
C
panel (A/D/E/F/I) and attach using
At the same time,insert the back panel (L)
cam-locks (4).
Place the cam-bolts (3) into holes in
Rotate the 18 cam-bolts (3) into holes in
facing panel (B/C).

Figure 9
(7)
(6)
Figure 8
Please insert at least two screws into a
wall stud.
Drill to holes into the wall.
Holes should be spaced with the middle of
the top panel.
Insert screws (6) into anchors (7) and
rotate screws (6) until anchors (7) expand
Insert anchors (7) into holes.
in wall.
(8)
Cover cam-locks (4) with cotton mats (8)
provided.
Insert wicker baskets.

Missing or damaged hardware and/or parts will be replaced free
of charge. We do not sell parts. Southern Enterprises Inc.
will provide replacement parts for only those items purchased
within the last 9 months. If this product has not been
purchased from our retail affiliates (within 9 months), we are
under no obligation to provide parts or replacement
merchandise. Parts will not be available for items arriving
fully assembled. Parts will be sent if available from SEI
Please indicate where you purchased this item:Store/Website/Catalog
Quantity Needed
Please indicate color/size/style number:
Phone Number
Parts LetterStyle No Parts Description
600 Freeport Pkwy, Ste: 200
Customer Service 1-800-633-5096
[e-mail]
Name
Address
City/State/Zip Code
PARTS REPLACEMENT FORM
SEI ITEM NO HE4012
Customer Information
Coppell, TX 75019