SEI HO973400TX User manual

12.12.2013
HO973400TX, HO973500TX
MULTIFUNCTION DESK
Assembly Instructions
For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
[email protected]
www.seidal.com
Max top weight = 50 lb., max weight for shelf = 20 lb.

p. 2
PARTS LIST
DESCRIPTION QUANTITY
Side Frame1. 2
Shelf Support Bar2. 2
Left Metal Frame3. 1
Right Metal Frame4. 1
Cross Bar5. 2
Upper Tube6. 1
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Using a screw that is too long will cause damage.
Before beginning assembly, separate each type of
screw. Carefully study the screw diagrams below.
MULTIFUNCTION DESK
Care and Cleaning Instruction:
Before using, wipe with a clean, dry cloth. Avoid
rubbing or scratching the surface with rough or
abrasive objects.
For replacement parts or questions, please
call Customer Service at 1-800-633-5096.
Please call manufacture for assistance, questions
or parts.
Assembly Tool Required
Phillips Screwdriver
Not Included

p. 3
PARTS LIST
DESCRIPTION QUANTITY
Lower Tube7. 1
Desktop8. 1
Bottom Panel9. 1
Upper Shelf10. 1
Rear Panel11. 1
Drawer Front Panel12. 1
Drawer Front Inside Panel13. 1
Drawer Rear Panel14. 1
Cork Board15. 1

p. 4
PARTS LIST
DESCRIPTION QUANTITY
Middle Panel - Right16. 1
Middle Panel - Left17. 1
Side Panel18. 2
Drawer Left Side Panel19. 1
Drawer Right Side Panel20. 1
Front Panel21. 2
Drawer Bottom Panel22. 1
Handle23. 1
Leveler24. 4

p. 5
PARTS LIST
DESCRIPTION QUANTITY
Allen Bolt - 1/4” x 1-7/8”25. 10
Phillips Screw - 5/32” x 1-1/4”26. 12
Phillips Screw - 3/16” x 1-3/4”27. 8
Phillips Screw - 3/16” x 1-1/4”28. 4
Phillips Screw - 5/32” x 1”29. 2
Phillips Screw - 5/32” x 1/2” 30. 10
Phillips Bolt - 5/32” x 1-1/4”31. 2
Phillips Bolt - 3/16” x 1/2”32. 1
Cam Bolt33. 4
Cam Lock34. 4
Wooden Dowel35. 30
Nut - Larger36. 4
Nut - Small37. 1
Allen Wrench38. 1

p. 6
• Attach Middle Panel (#16 and #17) to Desktop (#8) using Cam Bolt (#33),
Cam Lock (#34) and Wooden Dowel (#35).
8
16
17
34
33
33
35
33
35
33
34
F
R
ONT
SI
DE
STEP 1

p. 7
• Attach Rear Panel (#11), Side Panels (#18) and Front Panels (#21) to
Desktop (#8) and Middle Panel (#16 and #17) using Wooden Dowel (#35).
• Attach Bottom Panel (#9) to Middle Panels (#16 and #17) using Phillips
Screws (#26).
FR
ON
T
S
I
DE
STEP 2
8
21
21
18
18
26
26
9
11
35
35
17
16

p. 8
• Attach Side Frames (#1), Cross Bar (#5) and Lower Tube (#7) to DESKBOX
using Phillips Screws (#27 and #30, ), Allen Bolts (#25), Phillips Bolt (#32)
and Nut-Small (#37).
• Attach Leveler (#24) to bottom of Side Frames (#1).
STEP 3
24
1
7
37
32
5
27
27
30
30
24
25
25
DESK BOX
1

p. 9
• Attach Upper Tube (#6) to Shelf Support Bars (#2) using Allen Bolts (#25).
• Attach Shelf Support Bar (#2) to Side Frames (#1) using Allen Bolt (#25)
and Nut-Larger (#36).
STEP 4
2
6
25
36
25
25
36
2
25
25

p. 10
• Attach Left Metal Frame (#3) and Right Metal Frame (#4) to Cord Board
(#15) using Phillips Screws (#30).
• Attach Upper Shelf (#10) and Cork Board (#15) to Upper Tube (#6) using
Phillips Screws (#28 and #30) and Allen Bolts (#25).
STEP 5
10
15
3
4
28
28
25
25
BACK SIDE
30 30
30 30

p. 11
• Attach Drawer Left Side Panel (#19) and Drawer Front Inside Panel (#13)
to Drawer Rear Panel (#14) and Drawer Bottom Panel (#22) using Phillips
Screws (#26).
• Attach Drawer Right Side Panel (#20) to Drawer Rear Panel (#14), Drawer
Bottom Panel (#22) and Drawer Front Inside Panel (#13) using Phillips
Screws (#26).
• Attach Drawer Front Panel (#12) to Drawer Front Inside Panel (#13) using
Phillips Screws (#29).
• Attach Handle (#23) to Drawer Front Panel (#12) using Allen Bolts (#31).
STEP 6
12
19
20
22
31
29
13
26
26
23
14
26
26

p. 12
• Attach Drawer slide into the desk.
STEP 7
ATTENTION !
• Make sure all bolts and screws have been fully tightened for safety
before using this product.
• Check and re-tighten all bolts and parts at least every 2 months.

p. 13
HO973400TX/ HO973500TX - Parts Replacement Form
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/catalog
Style No Parts No Parts Description Quantity Needed
Customer Service 1-800-633-5096
[email protected]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019
Please immediately examine this product carefully. Any request for missing parts or damage
replacement must be received within 90 days of your receipt of the product. Replacement, if
available, will be honored within this time frame. Parts will not be available for items arriving
fully assembled. We do not recommend modifying product(s) and we are not responsible for
any damages due to product modification(s). If damages or missing parts are not reported
within 90 days of your receipt, we are under no obligation to provide parts or replacement
merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/9am - 4pm
Mon-Fri Central time if you have product issues or email us at [email protected]. Please ask
for customer service representative for issues involving damages or replacement parts.
Please ask for technical assistance representative for any issues with product and assembly/
construction.
Please contact the retailer that you purchased from for returns.