SEI Mirage MS915800TX User manual

For assistance with assembly contact:
Southern Enterprises, Inc.
Customer Service 1-800-633-5096
[e-mail]
www.seidal.com
MS915800TX
Mirage TV/ Media Stand- Silver
ASSEMBLY INSTRUCTION
PO#：
Page1

A
Quantity
of 1
top panel
B
Quantity
of 1
left side panel
C
Quantity
of 1
right side panel
D
Quantity
of 1
left vertical panel
E
Quantity
of 1
right vertical panel
F
Quantity
of 1
fixed shelf panel
G
Quantity
of 1
middle leg
H
Quantity
of 1
bottom panel
I
Quantity
of 1
front rail
J
Quantity
of 1
drawer front panel
K
Quantity
of 1
left drawer side panel
L
Quantity
of 1
right drawer side panel
M
Quantity
of 1
drawer back panel
N
Quantity
of 1
drawer bottom panel
O
Quantity
of 1
top back panel
Mirage TV/Media Stand
Parts list
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded surface
like carpet or blanket. Check that you have all parts indicated. Call customer service if hardware is missing.
Before beginning assembly, carefully study the diagrams below and sort your hardware
according to the pictures. Using the incorrect hardware will cause damage.
P
age 2

P
Quantity
of 1
bottom back panel
Q
Quantity
of 1
middle adjustable shelf
R
Quantity
of 2
side adjustable shelf
S
Quantity
of 1
left door
T
Quantity
of 1
right door
1
Quantity
of 26
cam bolt
2
Quantity
of 22
cam lock
3
Quantity
of 14
wood dowel
4
Quantity
of 26
screw: Dia1/8”x1/2”L
5
Quantity
of 4
machine screw: Dia3/16”x1-3/4”L
6
Quantity
of 2
magnet
7
Quantity
of 3
knob
8
Quantity
of 3
small bolt
Dia5/32”x7/8”L
9
Quantity
of 12
shelf pin
P
age 3

10
Quantity
of 12
screw (for hinge and Magnet)
Dia1/8”x1/2”L
11
Quantity
of 3
plastic washer
12
Quantity
of 26
sticker cover
1
3
Quantity
of 4
nut
1
4
Quantity
of 4
Cam lock
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish.Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
Call Customer Service at 1-800-633-5096
Assembly Tool Required No.2 Phi
Assembly Tool Required No.2 Phillips
Screwdriver (Not included)

Figure 1
Insert cam locks (2) into holes on
fixed shelf (F). Screw cam bolts
(1) into holes on left vertical panel
(D) and right vertical panel (E).
Attach left vertical panel (D) and
right vertical panel (E) to fixed
shelf panel (F) by inserting wood
dowels (3) and cam bolts (1)into
corresponding holes until side
panel (D), (E), and fixed shelf
panel (F) meet.
Tighten by rotating cam locks (2)
clockwise with phillips
screwdriver.
Cover cam locks with sticker
covers (12).
Mirage TV/Media Stand
Assembly Instructions
2
D
E
F
1
1
3
1
Page 5

Figure 2
Attach front rail (I) by inserting
wood dowels (3) into holes on
front rail (I).
Insert cam locks (2) into holes on
front rail (I). Screw cam bolts (1)
into holes on left side panel (B)
and right side panel (C).
Attach left side panel (B) and right
side panel (C) to front rail (I) by
inserting wood dowels (3) and
cam bolts (1) into corresponding
holes until left side panel (B), right
side panel (C), and front rail (I)
meet.
Tighten by rotating cam locks (2)
clockwise with phillips
screwdriver.
Insert cam locks (2) into holes on
left side panel (B), left vertical
panel (D), right vertical panel (E),
and right side panel (C).
Screw cam bolts (1) into holes on
bottom panel (H).
Attach bottom panel (H) to left
side panel (B), left vertical panel
(D), right vertical panel (E), and
right side panel (C) by inserting
wood dowels (3) and cam bolts
(1) into corresponding holes until
all panels meet.
Tighten by rotating cam locks (2)
clockwise with phillips
screwdriver.
Cover cam lock holes with sticker
covers (12) as shown.
Attach middle leg (G) to bottom
panel (H) by hand.
P
age 6
H
B
C
D
E
3
1
2
1
2
3
3
3
2
2
2
3
13
1
3
2
G
12
12
2

Figure 3
Insert cam locks (2) into holes
on assembled unit.
Screw cam bolts (1) into holes
on top panel (A).
Attach top panel (A) to
assembled unit on by inserting
wood dowels (3) and cam bolts
(1) into corresponding holes
until top panel (A) and
assembled unit meet.
Tighten by rotating cam locks
(2) clockwise with phillips
screwdriver.
Cover cam lock holes with
sticker covers (12) as shown.
A
D
E
2
1
3
31
2
2
Page 7

Figure 4
Insert nut (13) into hole on
drawer back panel (M),attach
right drawer side panel (L) and
left drawer side panel (K) to
drawer back panel (M) with
machine screws (5).
Tighten screws (5) with phillips
screwdriver. Slide drawer
bottom panel (N) into the
grooves of right drawer side
panel (L), left drawer side panel
(K), and drawer back panel
(M). Insert cam locks (14) into
holes on left drawer side panel
(K) and right drawer side panel
(L).
Screw cam bolts (1) into holes
on drawer front panel (J).
Attach drawer front panel (J) to
left drawer side panel (K) and
right drawer side panel (L) until
all panels meet.
Tighten by rotating cam locks
(14) clockwise with phillips
screwdriver.
Cover cam lock holes with
sticker covers (12) as shown.
Attach knobs (7) to drawer front
panel (J) with small bolts (8)
through plastic washer (11).
Tighten small bolts with phillips.
Tip: Don’t over tighten bolts (8)
because it will cause the mirror
to crack.
Page 8

Figure 5
Attach top back panel (O) and
bottom back panel (P) to
assembled unit with screws (4).
Tighten screws (4) with phillips
screwdriver.
Figure 6
Attach magnet (6) to
assembled unit with screws
(10).
Attach left door (S) and right
door (T) to assembled unit on
with screws (10).
Insert shelf pins (9) to holes on
assembled unit.
Attach knobs (7) to left door (S)
and right door (T) with small
bolts (8) through plastic
washers (11).
Tighten screw and small bolt
with phillips screwdriver.
4
4
4
4
P
age 9
8
7
11
7
8
9
9
99
9
10
6
S
T

Figure 7
Place adjustable shelves (R)
and (Q) onto shelf pins as
shown.
Attach drawer into assembled
unit. Make sure drawer
smoothly slides into side
panel’s female slides.
Figure 8
Your Mirage TV/media stand is
ready to use.
R
R
P
age 10

Please immediately examine this product carefully. Any request for missing parts or damage replacement must
be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this
time frame.Parts will not be available for items arriving fully assembled. We do not recommend modifying
product(s) and we are not responsible for any damages due to product modification(s). If damages or missing
parts are not reported within 90 days of your receipt, we are under no obligation to provide parts or replacement
merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri Central
time if you have product issues or email us at [e-mail]. Please ask for customer service
representative for issues involving damages or replacement parts. Please ask for technical assistance
representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Parts Replacement orm
Customer Service 1-800-633-5096
[e-mail]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019
Page 9

CAUTION
The top shelf is intended for a flat screen television with a maximum overall width of 50” and supports up to 175
lb.
The top shelf is NOT INTENDED for tube televisions.
Each center shelf should not be loaded with more than 20 lb. Each side shelf should not be loaded with more
than 15 lb. the drawer box should not be loaded with more than 15 lb
DO NOT EXCEED RECOMMENDED LOAD. Use with products heavier than the
maximum sizes and weights indicated may result in instability causing possible injury.
This unit contains a permanent warning sticker located on under side of top shelf or inside drawer.
Do not allow children under 16 years to move the cart.
Model: MS915800TX
MIRAGE TV/MEDIA STAND
Southern Enterprises, Inc
600 Freeport Parkway,
Suite 200 Coppell, Texas, 75019
Manufacture Date: 04/01/2014
Page 10