Sei Torres desk ho270500tx-black User manual

For assistance with assembly contact:

Southern Enterprises Inc.

Customer Service 1-800-6 -5096

service@seidal.com

www.seidal.com

TORRES DESK

HO270500TX-BLACK

Assembly Instructions

PO#11906

A Quantity

of 45

CAM BOLT（￠6.5*5mm）

B Quantity

of 41

WOOD DOWEL（￠8*0mm）

C Quantity

of 45

CAM LOCK（￠14.8*11.5mm）

D Quantity

of 2

HEXAGON SOCKET BOLT（￠5/16”*1-1/8”）

E Quantity

of 2

SPRING WASHER（￠5/16”）

F Quantity

of 2

FLAT WASHER（￠5/16”*16mm）

G Quantity

of 1

ALLEN WRENCH（5mm）

H Quantity

of 1

STOPPER（L55*W16mm）

I Quantity

of 8

FLAT HEAD LONG SCREW（#8*25mm）

J Quantity

of 1

FLAT HEAD SHORT SCREW（￠ *12mm）

TORRES DESK

Parts List

Please review all parts and hardware before disposing of any packaging.

Call Customer Service if missing hardware. Do not return to store/retailer.

Using a screw that is too long will cause damage.

Before beginning assembly, separate each type of screw. Carefully study the

screw diagrams below . You may receive extra hardware with your unit.

K Quantity

of 45

COVER（￠16mm）

(1) Quantity

of 1

TOP PANEL

(2) Quantity

of 1

LEFT SIDE PANEL

(3) Quantity

of 1

MIDDLE VERTICAL PANEL

(4) Quantity

of 1

RIGHT SIDE PANEL

(5) Quantity

of 1

VERTICAL PANEL

(6) Quantity

of 1

FRONT PANLE

(7) Quantity

of 1

BACK PANEL

(8) Quantity

of 1

UPPER SHELF PANEL

(9) Quantity

of 1

LOWER SHELF PANEL

(10) Quantity

of 1

BASE

(11) Quantity

of 1

CROSS BAR

(12) Quantity

of 1

CONNECTION PANEL

(13) Quantity

of 1

DRAWER FRONT PANEL

(14) Quantity

of 2

DRAWER SIDE PANEL

(15) Quantity

of 1

DRAWER BACK PANEL

(16) Quantity

of 1

DRAWER BOTTOM PANEL

TORRES DESK

Parts List

Please review all parts and hardware before disposing of any packaging.

Call Customer Service if missing hardware. Do not return to store/retailer.

Using a screw that is too long will cause damage.

Before beginning assembly, separate each type of screw. Carefully study the

screw diagrams be

low . You may receive extra

hardware with your unit.

Care and Cleanin Instructions:

Before using, wipe with a clean, dry cloth.

Periodically apply furniture wax to renew

the finish . Avoid rubbing or scratching the

surface with rough or abrasive objects.

For replacement parts or questions, please

Call Customer Service at 1-800-6 -5096

Do not return product to store, please call

Manufacturer for assistance, questions or

Parts.

Assembly Tool Required

No.2 Phillips Screwdriver (Not Included)

Fi ure 1

INSERT CAM LOCKS(C) INTO

PREDRILLED HOLES ON LOWER SHELF

PANEL (9). SCREW CAM BOLT(A) INTO

PREDRILLED HOLES ON VERTICAL

PANEL (5). ATTACH LOWER SHELF

PANEL (9) TO VERTICAL PANEL (5) BY

SLIPPING WOOD DOWEL(B) & CAM

BOLT(A) INTO CORRESPONDING

PREDRILLED HOLES UNTIL LOWER

SHELF PANEL (9) & VERTICAL PANEL

(5) MEET. SECURE BY ROTATING CAM

LOCK (C) COUNTERCLOCKWISE WITH

PHILLIPS SCREWDRIVER.

Fi ure 2

INSERT CAM LOCKS(C) INTO

PREDRILLED HOLES ON ASSEMBLED

UNIT IN THE STEP 1. SCREW CAM

BOLT(A) INTO PREDRILLED HOLES ON

FRONT PANEL (6).

ATTACH ASSEMBLED UNIT IN THE STEP 1

TO FRONT PANEL (6) BY SLIPPING WOOD

DOWEL(B) & CAM BOLT(A) INTO

CORRESPONDING PREDRILLED HOLES

UNTIL FRONT PANEL (6) & ASSEMBLED

UNIT IN THE STEP 1 MEET. SECURE BY

ROTATING CAM LOCK (C)

COUNTERCLOCKWISE WITH PHILLIPS

SCREWDRIVER.

TORRES DESK

Assembly Instructions

Fi ure 3

INSERT CAM LOCKS(C) INTO

PREDRILLED HOLES ON ASSEMBLED

UNIT IN THE STEP 2. SCREW CAM

BOLT(A) INTO PREDRILLED HOLES ON

UPPER SHELF PANEL (8). ATTACH

ASSEMBLED UNIT IN THE STEP 2 TO

UPPER SHELF PANEL (8) BY SLIPPING

WOOD DOWEL(B) & CAM BOLT(A) INTO

CORRESPONDING PREDRILLED HOLES

UNTIL UPPER SHELF PANEL (8)) &

ASSEMBLED UNIT IN THE STEP 2 MEET.

SECURE BY ROTATING CAM LOCK (C)

COUNTERCLOCKWISE WITH PHILLIPS

SCREWDRIVER.

Fi ure 4

INSERT CAM LOCKS(C) INTO

PREDRILLED HOLES ON RIGHT

SIDE PANEL (4). SCREW CAM

BOLT(A) INTO PREDRILLED HOLES

ON ASSEMBLED UNIT IN THE STEP

. ATTACH RIGHT SIDE PANEL (4)

TO ASSEMBLED UNIT IN THE STEP

BY SLIPPING WOOD DOWEL(B) &

CAM BOLT(A) INTO

CORRESPONDING PREDRILLED

HOLES UNTIL RIGHT SIDE PANEL

(4) & ASSEMBLED UNIT IN THE

STEP MEET. SECURE BY

ROTATING CAM LOCK (C)

COUNTERCLOCKWISE WITH

PHILLIPS SCREWDRIVER.

TORRES DESK

Assembly Instructions

Fi ure 5

INSERT CAM LOCKS(C) INTO

PREDRILLED HOLES ON

ASSEMBLED UNIT IN THE STEP 4.

SCREW CAM BOLT(A) INTO

PREDRILLED HOLES ON BACK

PANEL (7). ATTACH BACK PANEL (7)

TO ASSEMBLED UNIT IN THE STEP

4 BY SLIPPING WOOD DOWEL(B) &

CAM BOLT(A) INTO

CORRESPONDING PREDRILLED

HOLES UNTIL BACK PANEL (7) &

ASSEMBLED UNIT IN THE STEP 4

MEET. SECURE BY ROTATING CAM

LOCK (C) COUNTERCLOCKWISE

WITH PHILLIPS SCREWDRIVER.

USE FLAT HEAD SHORT SCREW (J) TO

ATTACH STOPPER (H) & CROSS BAR (11)

TOGETHER.

INSERT CAM LOCKS(C) INTO

PREDRILLED HOLES ON CROSS BAR (11).

SCREW CAM BOLT(A) INTO PREDRILLED

HOLES ON ASSEMBLED UNIT IN THE

STEP 5. ATTACH CROSS BAR (11) TO

ASSEMBLED UNIT IN THE STEP 5 BY

SLIPPING WOOD DOWEL(B) & CAM

BOLT(A) INTO CORRESPONDING

PREDRILLED HOLES UNTIL CROSS BAR

(11) & ASSEMBLED UNIT IN THE STEP 5

MEET. SECURE BY ROTATING CAM LOCK

SCREWDRIVER. INSERT CAM LOCKS(C)

INTO PREDRILLED HOLES ON MIDDLE

VERTICAL PANEL ( ). SCREW CAM

BOLT(A) INTO PREDRILLED HOLES ON

ASSEMBLED UNIT. ATTACH ASSEMBLED

UNIT TO MIDDLE VERTICAL PANEL ( ) BY

SLIPPING WOOD DOWEL(B) & CAM

BOLT(A) INTO CORRESPONDING

PREDRILLED HOLES UNTIL ASSEMBLED

TORRES DESK

Assembly Instructions

Fi ure 6

UNIT & MIDDLE VERTICAL PANEL ( )

MEET. SECURE BY ROTATING CAM LOCK

SCREWDRIVER.

Fi ure 7

INSERT CAM LOCKS(C) INTO

PREDRILLED HOLES ON

ASSEMBLED UNIT IN THE STEP 6.

SCREW CAM BOLT(A) INTO

PREDRILLED HOLES ON BACK BASE

(10). ATTACH BASE (10) TO

ASSEMBLED UNIT IN THE STEP 6 BY

SLIPPING WOOD DOWEL(B) & CAM

BOLT(A) INTO CORRESPONDING

PREDRILLED HOLES UNTIL BASE

(10) & ASSEMBLED UNIT IN THE

STEP 6 MEET. SECURE BY

ROTATING CAM LOCK (C)

COUNTERCLOCKWISE WITH

PHILLIPS SCREWDRIVER.

INSERT (18) INSERT TO THE

INSERT CAM LOCK(C) INTO

PREDRILLED HOLES ON

CONNECTION PANEL (12).

SCREW CAM BOLT(A) INTO

PREDRILLED HOLES ON ASSEMBLED

UNIT IN THE STEP 7. ATTACH

CONNECTION PANEL (12)) TO

ASSEMBLED UNIT IN THE STEP 7 BY

SLIPPING WOOD DOWEL(B) & CAM

BOLT(A) INTO CORRESPONDING

PREDRILLED HOLES UNTIL

CONNECTION PANEL (12) &

ASSEMBLED UNIT IN THE STEP 7

MEET. SECURE BY ROTATING CAM

LOCK (C) COUNTERCLOCKWISE

TORRES DESK

Assembly Instructions

Fi ure 8

WITH PHILLIPS SCREWDRIVER.

ATTACH LEFT SIDE PANEL (2) TO

ASSEMBLED UNIT BY SLIPPING

WOOD DOWEL(B) INTO

CORRESPONDING PREDRILLED

HOLES UNTIL LEFT SIDE PANEL(2)

& ASSEMBLED UNIT MEET. USE

ALLEN WRENCH (G) & HEXAGON

SOCKET BOLT (D) & SPRING WASHER

(E) & FLAT WASHER (F) CONNECT

LEFT SIDE PANEL (2) & ASSEMBLED

UNIT TOGETHER.

Fi ure 9

INSERT CAM LOCKS(C) INTO

PREDRILLED HOLES ON

ASSEMBLED UNIT IN THE STEP 8.

SCREW CAM BOLT(A) INTO

PREDRILLED HOLES ON TOP PANEL

(1). ATTACH TOP PANEL (1) TO

ASSEMBLED UNIT IN THE STEP 8 BY

SLIPPING WOOD DOWEL(B) & CAM

BOLT(A) INTO CORRESPONDING

PREDRILLED HOLES UNTIL TOP

PANEL (1) & ASSEMBLED UNIT IN

THE STEP 8 MEET. SECURE BY

ROTATING CAM LOCK (C)

COUNTERCLOCKWISE WITH

PHILLIPS SCREWDRIVER.

USE FLAT HEAD LONG SCREW (I)

TO CONNECT DRAWER SIDE

PANELS (14) & DRAWER FRONT

PANEL (1 ) & DRAWER BOTTOM

PANEL (16) & DRAWER BACK PANEL

(15) TOGETHER.

TORRES DESK

Assembly Instructions

Fi ure 10

Fi ure 11

Stick covers (K) to the cam locks

PUSH DRAWER INTO ASSEMBLED

UNIT IN THE STEP 10.

Fi ure 12

NOW YOUR NEW DESK IS READY

TO USE.

Please immediately examine this product carefully. Any request for missing parts or damage replacement must

be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this

time frame.Parts will not be available for items arriving fully assembled. We do not recommend modifying

product(s) and we are not responsible for any damages due to product modification(s).

If damages or missing

parts are not reported within 90 days of your receipt, we are under no obligation to provide parts or replacement

merchandise.

Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri Central

time if you have product issues or email us at service@seidal.com. Please ask for customer service

representative for issues involving damages or replacement parts. Please ask for technical assistance

representative for any issues with product and assembly/construction.

Please contact the retailer that you purchased from for returns.

Customer Information

Name

Address

City/State/Zip Code

Phone Number

Please indicate where you purchased this item: Store/Website/Catalog

Please indicate color/size/style number:

Style No Parts Letter Parts Description Quantity Needed

Parts Replacement Form

Customer Service 1-800-633-5096

service@seidal.com

Southern Enterprises, Inc.

600 Freeport Parkway, Suite 200

Coppell, Texas 75019

Table of contents

Popular Indoor Furnishing manuals by other brands

Regency

Regency LWMS3015 Assembly instructions

Furniture of America

Furniture of America CM7751C Assembly instructions

Safavieh Furniture

Safavieh Furniture Estella CNS5731 manual

PLACES OF STYLE

PLACES OF STYLE Ovalfuss Assembly instruction

Trasman

Trasman 1138 Bo1 Assembly manual

Costway

Costway JV10856 manual

moss DESIGN

moss DESIGN Caisson Credenza Assembly instructions

Aquaglide

Aquaglide FULL DECK 15.0 owner's manual

AREBOS

AREBOS AR-HE-SW30 user manual

Till-Hilft

Till-Hilft Fulda 87005.330 Assembly instructions

Twoey Outside

Twoey Outside 2010 quick start guide

Hettich

Hettich Easys 200 operating instructions

The bedboss

The bedboss RELAX 404 Series owner's manual

Oeseder Möbelindustrie

Oeseder Möbelindustrie Bern 991 720 Assembly instructions

Costway

Costway HW68469 user manual

Next ALIX A27743 Assembly instructions

BROSA

BROSA Hans Assembly guide

Prodigg

Prodigg MINIKA PBA015T-FUR installation manual

SEI TORRES DESK HO270500TX-BLACK User manual

Popular Indoor Furnishing manuals by other brands