Seicane S166224 Guide

www.seicane.com
Seicane S166224 2009-2012 Hyundai H1 aftermarket radio dvd gps
stereo upgrade installation replacement instruction
Seicane S166224 2009-2012 Hyundai H1 car radio after installation
Please notice before t e installation:
1. Please apply the parkin brake and remove the ne ative cable on the vehicle battery before
the removal to ensure safety.
2. A lever and a screwdriver need to be prepared before the installation.
3. For your convenience, here’s the recommended tools for removal and installation from
Seicane, please check for more details:
http://www.seicane.com/car-dvd-dismantlin -device-srd-400

www.seicane.com
2009-2012 Hyundai H1 car radio installation steps
1.Pry the plastic panel with a removal tool.
2.Remove the panel, and disconnect the connectors at the back of the panel.
3. Unscrew three screws securin the panel with a screwdriver.

www.seicane.com
4. Pry the trim panel shown as below with a removal tool.

www.seicane.com
5.Remove the trim panel, then disconnect the connectors at the back of the panel.
6. Unscrew all screws securin the ori inal car radio with a screwdriver.
7. Gently take the factory radio out of the dashboard.
8. Disconnect all connectors at the back of the ori inal car radio.
9. Check all the accessories for the new Seicane car radio.
10. Connect the harnesses to the back of the new Seicane car radio.
11. Connect the Seicane car radio to your ori inal car radio 's plu s.
12. Turn on the new Seicane car radio to have a careful check if everythin works well. If it
doesn't, please check whether all the cables are connected correctly.
13.Put the new Seicane car radio into the dash.
14. Put everythin into their ori inal place. All the installation is done.
Please note:
We su est you arran e a professional to install it. If you have any questions about installation,
please send us photos about your ori inal car's plu s, we can make a wirin dia ram for your car.