Blaupunkt SAN MARCOS 370 User manual

CAR MULTIMEDIA
SAN MARCOS 370 - 9" & 10.1"
NOTE: Please do not watch videos or use Apps while the vehicle is in motion. Doing so, is a safety
violation. To watch videos or use Apps, please ensure that the vehicle is in parked mode with
handbrake activated. Please check compatibility of the device with your mobile phone
before purchase. New phone software versions in the future may or may not be compatible
with the device. In-Warranty replacement will not be applicable for non compatibility of
mobile phone with the device.

2
1 Microphone
2 Reset button
Restore to default factory settings of the device.
Caution: All personal settings will be lost
3 POWER button
Turn ON/OFF device (Press and hold for more than 2 seconds)
In operation: Mute audio source (Short press)
4 HOME button
Return to home page at any point
5 BACK button
6 Increase volume
7 Decrease volume
8 Touchscreen user interface

3
Safety Notes 4
Road Safety 5
Placing the device in operation 6
Switching ON / OFF 6
Volume 6
Main menu (Home) 6
Setting the reception area 6
Radio mode 6
Start radio mode 6
Select memory bank 6
Tuning into a station 6
Storing stations manually 7
Storing stations automatically 7
Scanning stations 7
Adjusting the seek tuning sensitivity 7
RDS options 7
Switching the AF function on/ off 7
Switching priority for TA on/off. 8
Switching the CT function on/off 8
Selecting Program Type & Start
Seek Tuning 8
USB media playback 8
USB data carrier 9
Audio playback from USB 9
Video playback from USB 9
Image playback from USB 10
Bluetooth mode 11
Starting Bluetooth mode 11
Registering Bluetooth devices 11
Telephone mode 11
Alphabetic search 12
Audio playback via Bluetooth streaming 12
WebLink 12
Connect with Android phone 12
Connect with iPhone 12
External audio source 13
Rear camera input 13
Sound settings 13
Equalizer 13
Volume distribution (fader/balance) 13
Steering wheel control 14
Basic settings 14
System Language 14
Adjust Radio Region 14
Steering Wheel Control Programming 14
Adjust General Settings 15
Adjust Time 15
Useful information 15
Connection diagram 16
Troubleshooting 17
Appendix 18

4
device. In case you need any assistance,
please visit the nearest service centre. The
device should be open by an authorised
person only.
ŸUse as Directed: this car audio system is
intended for installation and operation in a
vehicle with 12V (negative ground) vehicle
system voltage. Observe the output limits
of the device. Only an authorised specialist
should perform repairs and installation, if
necessary.
ŸInstallation Instructions: You may only
install the car audio system yourself if you
are experienced in installing car audios
systems, and are very familiar with the
electrical system of the vehicle. For this
purpose, observe the connection diagram
at the end of these instructions. For self-
installation make sure you have the right
tools with you.
ŸUse your device in such a way that you
can always safely control your vehicle. In
case of doubt, stop at a suitable location
and operate your device while the vehicle is
parked. As the driver, you must not use the
applications that will distract you from
traffic (depending on the scope of
functions of the device, e.g. viewing videos,
searching for a destination) (Navigation
equipped radios and other downloaded
application)
ŸFollow driving recommendations
during the route guidance only if you are
not violating any traffic regulations:
Traffic signs and traffic regulations always
h a v e p r i o r i t y o v e r d r i v i n g
recommendations.
ŸAlways listen at moderate volume to
protect your hearing and to be able to hear
warning signals (e.g. police sirens and other
external alerts while driving). During mute
phases (e.g. when changing the audio
source), changing the volume is not
advisable. Do not increase the volume
during this mute phase.
Safety notes
This car audio system was manufactured
according to recommended and established
safety guidelines in a state of the art facility.
Even so, dangers may occur if you do not
observe the safety notes in the instruction
manual.
These instructions are intended to familiarise
you with important functions.
ŸFor best results, please read the user
manual carefully and completely before
using the car audio system.
ŸAlways keep the user manual accessible to
all users.
ŸAlways handover the car audio system to
rd
any 3 party along with these instructions.
ŸIn addition, observe the instructions of the
devices used in combination with this car
audio system.
Symbols used
Below are the symbols used in this user
manual, please go through them carefully.
CAUTION:
Warns about possibilities of any
injuries that might occur.
DANGER:
Warns about damages to the DVD/CD
drive (No applicable to all Series 900
Model)
LOUD VOLUME:
Warns about high volume
üIdentifies a sequencing step
Ÿ Identifies a listing
General Warning
To avoid any injury or damage to yourself, your
car and others, please make sure to do as
following. Observe the following note to
protect yourself against injuries:
ŸDo not modify or open the device. Do not
do any unauthorised modification to the

5
Instructions to read this User
Manual
Illustrations are used in this manual to explain
operations and precautions. The illustrations
used in this manual are only for reference,
please take the actual unit as standard.
Marks
Mark for important preventive measures;
please read carefully to prevent any
injury.
Mark for a special explanation, auxiliary
interpretation, imitation and references.
Mark for additional information to
operate this unit. Warm notes: When
there is any difference between the
Manual and the actual unit, please take
the actual units as standard.
Cleaning notes
ŸSolvents, cleaning and scouring agents as
well as dashboard spray and plastics care
products may contain ingredients that will
damage the surface & screen of the audio
system.
ŸUse only a dry or slightly moistened cloth
for cleaning the audio system.
Disposal notes
ŸDo not dispose of your old unit/batteries in
the household trash.
ŸUse the return and collection systems
available to dispose of the old device.
Scope of delivery
The scope of delivery includes:
ŸCar Audio System
ŸWiring Harness
ŸExternal Microphone
ŸInstallation Screws
Road safety
Observe the following notes about road
safety:
To avoid any injury or damage to yourself, your
car and others, please make sure to do as
following. Observe the following note to
protect yourself against injuries:
ŸBefore using this unit, please read all
related instructions carefully.
ŸAny damage to this unit caused by
improper operations will void the warranty.
ŸPlease do not watch videos or use other
Apps while the vehicle is in motion. Doing
so, is a Safety violation. To watch videos or
use Apps, please ensure that the vehicle is
in parked mode with handbrake activated.
ŸThe below-listed applications while driving
the vehicle may divert your attention form
the traffic situation and may lead to serious
accidents:
¡Using the navigation feature like
entering the destination address
¡Video playback or watching any kind of
video o Usage of internet via the browser
¡Use of connected phone via WebLink
¡Use or Download of Google PlayStore /
Google Maps / YouTube is not permitted
in the automotive environment
ŸYou are advised to refrain from any activity
which could possibly divert your attention
while driving. The best way to use these
applications is when your vehicle is parked
in a safe location.
ŸTo avoid short circuit, please do not dispose
the unit into the water and please do not
place or leave any kind of metal object
(such as a coin or metal tools) in the unit.
ŸPlease operate the unit as per this Manual, it
is not allowed to open the unit for
maintenance; In case if maintenance is
required, please seek professional help.
ŸAfter the car engine is off, please do not use
the car audio for a long time, otherwise, the
battery could be drained.
Road Safety | Scope of delivery

Setting the reception area
This car audio system is designed for
operation in different regions with different
frequency ranges and station technologies.
FIn the main menu, press the [ ] button.
The Settings menu is displayed.
FTap on the [ ] button to display the list of
available reception areas. The current
setting is highlighted.
FSelect the desired reception area by
clicking.
FPress the [ ] button. The main menu is
displayed again.
Radio mode
Start radio mode
In the main menu, press the [Radio] button.
The radio playback menu is displayed.
Select memory bank
Different memory banks and wave bands are
available. Up to 6 stations can be stored in
each memory bank.
FPress the [ ] button repeatedly until the
desired memory bank is displayed.
FM1 -> FM2 -> FM3 -> AM1 -> AM2 ->
Fm1
Tuning into a station
Tuning into stations manually
FBriefly press the [t] or [u] button once or
several times to change the frequency in
increments.
Placing the device in operation
Switching ON / OFF
Switching on/off with the rotary /
pushbutton
FFor switch-on, hold the [ ] button pressed
for more than 2 seconds.
FFor switch-off, hold the [ ] button again.
Switching on/off via vehicle ignition
If the car audio system is connected with the
vehicle ignition and it was switched off with
the POWER button, it is switched on or off with
the ignition.
Volume
Adjusting the volume You can adjust the
volume in steps from 0 (off) to 40 (maximum).
FPress [ ] / [ ] to change the volume.
Main menu (Home)
In the main menu, you press the buttons on
the touchscreen to call up the different
sources and operating modes.
FIn the current source, press the[ ] button.
The main menu is displayed.
F
[ ] Enter standby mode
[ ] Enter settings menu
[ ] Change the wallpaper
Note:
FSome sources can't be selected if the
external devices aren't ready.
FThe figures used in these instructions are
intended to facilitate the explanations
and details may deviate from your device.
6
Placing the device in operation Radio mode

Note:
For European Reception Area: If traffic
announcements feature is switched ON, only
stations with TA enabled broadcasts are stored
in the memory bank .
Scanning stations
You can use the scan function to play all the
receivable stations of the current waveband
for a few seconds.
FPress the [ PS ] button.
The seek tuning searches for stations in
the current waveband. Each receivable
station is played for a few seconds in the
process.
Adjusting the seek tuning sensitivity
The seek tuning sensitivity decides whether
the automatic station seek tuning finds only
strong stations or also weaker stations that
may be noisy.
FPress the [ LOC ] button to adjust the
sensitivity of station seek tuning.
If LOC is on, only stations with a strong
signal are found during seek tuning.
If LOC is off, stations with a strong and
weak signal are found during seek tuning.
RDS options
Many FM stations broadcast an RDS (Radio
Data System) signal in addition to their
programme in the reception area Europe that
allows additional functions, such as the
display of the station name.
FPress the [ ] button to show RDS options.
Switching the AF (alternate frequency)
function on/off
If the AF function is activated, the car audio
system automatically tunes into the best
receivable frequency for the station that is
currently set.
FPress the button right to [ AF ] to switch
the AF function on or off.
The AF button is illuminated if the AF
Enter broadcast frequency directly
If the frequency of the desired stations is
known, it can be entered directly via the
touchscreen.
FPress the [ ] button.
A numeric keypad is displayed for the
frequency input.
FEnter the frequency of the desired station
with the numeric keypad.
FPress the [ OK ] button.
F The radio playback menu is displayed, the
station of the frequency entered is played
back. Starting station seek tunin
FPress the [t] or [u] button for approx. 2
seconds to start station seek tuning.
The radio tunes into the next receivable
station.
Note:
For the reception area Europe: In the FM
waveband, only traffic information stations
are tuned into if the priority for traffic
information is switched on.
Storing stations manually
FSelect the desired memory bank with the
[ ] button.
FSet the desired station. or Press one of the
memory buttons [ P1 ] - [ P6 ] for approx. 2
seconds to store the current station at the
button.
The station is stored.
Storing stations automatically.
You can automatically search for and store the
strongest reception in the region in the
current memory bank. Any previously stored
stations in this memory bank are deleted in
the process.
FSelect a memory band.
FPress the [L] button.
The tuner starts the automatic station
seek tuning. After the storing is
completed, the radio plays the station at
memory location 1 of the previously
selected memory band.
7

function is switched on.
Switching priority for traffic
announcements on/off
In the reception region Europe, a FM station
can identify traffic announcements via RDS
signal. If priority for traffic reports is switched
on, a traffic report is automatically switched
through, even if the car audio system is
currently not in radio mode.
FPress the button right to [ TA ] to switch
the priority for traffic announcements on
or off.
The TA button is illuminated if the priority
for traffic announcements is switched on.
Switching the CT (Clock Time) function on/
off
Some stations broadcast the time and date
within the encoded radio data system signal.
The clock time is automatically adjusted when
'CT' is set to 'ON’.
FPress the button right to [ CT ] to switch
the clock time on or off.
NOTE:
Stations broadcasting close to time zones may
not broadcast the correct time in your
particular area. In this case, turn CT Off and
manually set the time.
Selecting Program Type and Start Seek
Tuning
You can select a programme type with the PTY
function to purposefully search for stations,
for example, that broadcast rock music or
sport events.
FPress the button [ ] on Radio menu to
display the programme types.
Scroll up/down a program with the
selected program type, it locks on to it and
commences playback.
8
USB media playback
Basic information
The car audio system can be used to play MP3
or WMA files on USB data carriers.
In addition, you can view movies and images
from USB data carriers on the display or a
connected monitor.
For safety reasons, the playback of movies and
images on the integrated monitor is allowed
only while the vehicle is in parked mode and
the handbrake is applied. The "BRAKE" cable
must be connected with the hand brake
connection of the vehicle (see Connection
diagram at the end of these instructions). The
movie playback on an external monitor is also
possible while driving.
Notes:
Blaupunkt cannot guarantee the flawless
E
function of USB data carriers available on the
market.
Note the following information when
preparing an MP3/ WMA data carrier:
Naming of tracks and directories: Max. 32
E
characters without the file extension ".mp3" or
".wma" (the use of more characters reduces
the number of tracks and folders that the car
audio system can recognise)
File system: FAT/FAT16/FAT32
E
File extension of audio files:
E
.MP3 for MP3 files
.WMA for WMA files
WMA files only without Digital Rights
E
Management (DRM) and created with
Windows Media® Player version 8 or later
MP3 ID3 tags: Version 1 and 2
E
Bit rate for creating audio files:
E
MP3: 32 to 320 kbps
WMA: 32 to 192 kbps
Maximum number of files and directories:
E
USB medium: Up to 10,000 entries
Supported audio format:
E
MP3/OGG/VVMA/FLAC/APE/WAV
Radio Mode | USB playback

9
Supported video format:
E
MP4/MPEG/AVI/MKV
USB data carrier
This device features a USB port at the rear of
the device.
Connecting a USB data carrier
Insert the USB data carrier in the USB
E
socket.
The device automatically switches to USB
mode. The data is read and playback.
Removing the USB data carrier
E
Turn off the car audio system.
Disconnect the USB data carrier.
Audio playback from USB
The principles of the audio playback
(MP3/WMA) from data carriers are identical for
all sources.
Select the USB source via the main menu.
E
The device changes to the USB source and
the playback starts.
If the playback does not start with the audio
playback,
press the [ ] button to change to the
E
folder/file list.
Press the [ ] button to display all the
E¯
audio files of the data carrier.
Briefly tap on the name of the folder/track. The
folder is opened/the track is started.
USB playback
After starting a title, the playback menu is
displayed.
[ / ] Repeat/Random play
[ ] Title selection
[ / ] Interrupt playback & continue playback
[ ] Title selection
[ ] Display the folder/file list.
Video playback from USB
Select the USB source via the main menu.
E
press the [ ] button to change to the
E
folder/file list.
Press the [ ] button to display all the
E
video files of the data carrier.
E
Note:
Folders and videos are selected and
started as described under audio playback.

If you selected a movie, the playback is started.
During the movie playback, the playback
menu is hidden.
Briefly touch the touchscreen once to
E
display the playback menu again.
The playback menu is shown.
[ ] Select previous movie.
[ / ] Interrupt playback & continue playback.
[ ] Select next movie.
[ / ] Repeat/Random play.
[ ] Select Day/Night mode.
[ ] Select Normal/Full mode.
[ ] Display the folder/file list.
Image playback from USB
Select the USB source via the main menu.
E
press the [ ] button to change to the
E
folder/file list.
Press the [ ] button to display all the
E
images of the data carrier.
Note:
Folders and images are selected and start as
described under audio playback.
USB playback
10
[ ]Select previous image.
[ / ] Interrupt playback & continue playback.
[ ] Select next image
[ ] Rotate the image
[ ] Animation effects
[ ] Select Normal/Full mode
[ ] Display the folder/file list.

11
Bluetooth Mode
Bluetooth mode
The Bluetooth® function allows registering cell
phones and media playback devices with the
car audio system.
When you register a cell phone with the car
audio system, you can make phone calls with
the built-in hands-free function. You can
access the lists of dialled numbers and the
phone book of the registered cell phone.
If the connected Bluetooth® device supports
the functions A2DP and AVRCP, you can play
the music via the car audio system and control
the playback. During a call, the music playback
is interrupted and continued again after the
call.
If a cell phone is registered via Bluetooth® and
a call is received during the playback of
another source, the source playback is
interrupted and the call menu is displayed.
Starting Bluetooth mode
In the main menu, press on [ Phone ].
E
The Bluetooth® menu is displayed. It
contains the list of known Bluetooth®
devices. Other audio sources are switched
off.
Registering Bluetooth devices
If you want to register a device with the car
audio system for the first time, proceed as
follows:
Ensure that Bluetooth® is activated at the
E
car audio system and at your Bluetooth®
device.
Search for new devices/connections on
E
your Bluetooth® device.
The car audio system appears as "San
E
Marcos 370" in the list of Bluetooth®
devices.
Establish the connection; you may have to
E
enter the pairing code that was previously
entered on the car audio system.
The connection is being established and
the menu for the registered device is
displayed.
Note:
If a telephone is connected with the car
audio system, the Bluetooth® icon is
displayed at the top left of the display in all
audio/video sources.
Once the phone is paired with the radio the
below menu appears
Telephone mode
If you connected a phone with the car audio
system via Bluetooth®, the following menu
appears.
[ ] Display the dial keypad menu.
[ ] Call up records lists.
[ ] Call up the phone book.
[ ] Disconnect the device
[ ] Dial/Answer a call
[ ] End/Reject a call
[ ] Transfer the call to the phone
Enter a phone number with the keypad
E
and press the [ ] button.
Or
Select a contact/number via the caller lists
E
or phone book.
A call will be initiated.

If a call is coming in, the "Call in" number is
displayed.
[ ] Reject a call
[ ] Answer a call
Alphabetic search
Press [ ] on the left bottom of the screen to
access Phonebook. If you want to search a
contact, press [ L ] and enter the characters
via the keypad.
Once the phone is paired the screen on the
device displays the numeric keypad and is
ready to initiate a call.
Audio playback via Bluetooth streaming
If an audio streaming device is connected with
the car audio system via Bluetooth®, you can
play back the music via the car audio system
and control the playback.
Press the [ Bluetooth Audio ] button to
E
change to the audio playback.
[ ] Short press: Title selection.
[ ] Interrupt playback & continue playback.
[ ] Short press: Title selection.
12
Bluetooth Mode | WebLink
WebLink
Weblink function allows this audio system to
connect with a smartphone & display phone
screen on the main screen of the radio.
By WebLink, you can synchronize the screen
from your smart phone to the car multi-media
player.
And you can also control your phone by the
screen on the car multi-media player, such as
receiving calls, dialing calls, listening to the
music and watching movies or pictures from
your phone, as well using navigation from the
smart phone to the screen of the car multi-
media player.
The function of the WebLink depends on the
configuration of your smart phone.
Open the Main Menu and then touch
[WebLink ] to enter WebLink menu.
Connect with Android phone
Correctly connect your phone to the unit
E
by USB wire. (Original Data USB Cable
Recommended)
Make sure that the WebLink App is
E
installed on your phone.
After connection, operate according to the
E
screen software.
Connect with iPhone
Scan for Bluetooth devices and select this
E
system for connection. (Refer to the
chapter Bluetooth Mode)
Connect your iPhone with the unit by USB
E
wire. (Original Data USB Cable Recommended)
After connecting successfully, the screen of
E
your iPhone will sychronize to the unit's
display.
Tips:
For your driving safety, please do not use
E
the function during driving.
Since the mobile phone data cable differs
E
by brand, it is strongly recommended
using the original USB data line to connect
so as to guarantee the connection stability.
Due to variations in the performance and
E
standard features of mobile phones, the
performance of WebLink may vary with

each individual brand of mobile phone.
BPIN can not guarantee the compatibility
E
of all phones with this device.
External audio source
Audio Input - Aux-in
This device features AUX input for audio
playback.
Start the Aux-in mode with the button
E
[AUX]. The display shows the audio or
video playback of the selected AUX source.
Rear camera input
This device features a video input at the rear of
the device for connecting a camera that is
available as an option.
If a rear camera is connected, the image is
displayed on the screen, when the reverse
gear is engaged.
You can also visit the camera view by selecting
[Camera view] on the main menu. In this view,
Brightness/ Contrast/Colour can be adjusted.
By selecting “Camera View” on the main menu
the rear camera view, if connected, is
displayed on the screen. On this page,
Brightness/Contrast and Color can be
adjusted.
Sound settings
Equalizer
You can adjust the equalizer for all sources.
Press [ ] on the menu of the current
E
audio source.
The equalizer menu is displayed.
Select a preset equalizer via preset buttons
E
- Flat / POP / Classical / Rock / Jazz / User.
13
External audio source | Rear camera input | Sound settings
- Or -
Press the [ User ] button to adjust the level
E
of the available frequenc y bands
according to your preferences.
Note:
With the [ ] button, you can reset the
customised setting again.
- Or -
Press the [ Flat ] button for a linear sound
E
playback.
Press the [ Loud ] button to increase bass
E
and treble at low volume.
Volume distribution (fader/balance)
You can adjust the volume distribution in the
vehicle for all sources.
Press the [ ] button in EQ menu.
E
The menu for fader & balance is displayed.
Hold and drag the cursor to adjust fader
E
and balance.

Steering wheel control
Select [ ] in the Settings menu to enter SWC
setting
Touch number button to select a SWC
E
button.
Select a function icon on the screen.
E
Long press a steering wheel button.
E
Repeat step 2 and 3 until all the settings are
E
done.
To reset the programming, touch [ ].
E
14
Steering wheel control Basic Setting|
Basic settings
In the settings menu, you can adjust the basic
settings for the different functions of the
device to your requirements.
In the main menu, press the [ ] button.
A
The settings menu is displayed.
Call up the submenus with the buttons in
A
the lower area of the settings menu.
System Language
Touch [ ], if necessary.
E
Adjust Radio Region
Touch [ (X) ].
E
Select a radio region that matches your
E
location.
Steering Wheel Control Programming
Refer to previous page.

15
Adjust General Settings
Touch [ ].
E
The following settings are possible:
Dimmer Value: Adjust the display brightness
Beep Tone: Switch confirmation beep on/off
Safe Mode: When in Safe "On" mode, the
screen will display WARNING information if
you play a video. The warning screen will
prevent the driver from watching videos for
safety.
Guide line: Enable/Disable Guide line at
reverse mode.
Restore settings: Resets all personalised
settings.
Back camera Input: Enable/Disable Back
camera Input.
System information: Display the information
of software version.
Adjust Time
Touch [ ]
E
Set Date - Set the date
Set Time - Set the time
Use 24-hour format - Select between 12 & 24-
hour mode
Basic Setting | Useful information
Useful information
Warranty
We provide a 1 year manufacturer's warranty
for products bought within the India. For
devices purchased outside the India, the
warranty terms issued by our respective
responsible domestic agency is valid.
Register ONLINE within 15 days of
PURCHASE to activate WARRANTY.
The procedure to activate the warranty is
given below;
Service
If your device should need service or to get
more information about our local authorised
service center, you can email us at
Email: [e-mail]
OR
Call 1800 209 6820
Please activate your 1 Year warranty within
15 days of purchase.
To activate your e-warranty, please follow the below steps:
Should you require further assistance,
please call: Customer Support 1800 209 6820 OR
Email us: [e-mail]
Step 3. Complete a simple form to register
your product & activate e-warranty.
Step 1. Please SMS
<serial number> to 07760962759
Step 2. In response to the sent SMS, you should
receive back a link via SMS, please Click on it
E-user manual is available at www.blaupunktcar.in
and upon completion of registration.
INSTRUCTION CARD
for Warranty Registration.
Note: WARRANTY not applicable if bought from third party online portals.

Connection diagram
16

Unit does not Power ON
Troubleshooting
17

This item incorporates copy protection technology that is protected by U.S. patents and other
intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are
prohibited.
Windows® and Windows Media® are registered trademarks of the Microsoft Corporation in the
U.S.A. and/or other countries. This product is protected by certain intellectual property rights of
Microsoft. Use or distribution of such technology outside of this product is prohibited without a
license from Microsoft.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
Supported audio format: MP3/OGG/WMA/FLAC/APE/WAV
Supported video format: MP4/MPEG/AVI/MKV
18

19
Made for iPhone
Use of the Made for Apple badge means that an accessory has been
designed to connect specifically to the Apple product(s) identified in the
badge, and has been certified by the developer to meet Apple performances
standards. Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards. iPhone is a trademark of
Apple Inc., registered in the U.S. and other countries.
iPhone model names
iPhone 12 Pro Max
iPhone 12 Pro
iPhone 12
iPhone 12 mini
iPhone SE (2nd generation)
iPhone 11 Pro Max
iPhone 11 Pro
iPhone 11
iPhone XS Max
iPhone XS
iPhone XR
iPhone X
iPhone 8 Plus
iPhone 8
iPhone 7 Plus
iPhone 7
iPhone SE
iPhone 6s Plus
iPhone 6s

BPIN Private Limited
47, Atlanta Society, Nariman Point, Mumbai- 400 021
Toll Free: 1800 209 6820 | [email protected] | www.blaupunktcar.in