KAP HYUNDAI-KIA 10b User manual

INSTRUCTION
MANUAL
CONTACT
W kaptrader.com
E [e-mail]
A (05854) A-912 RM Tera-tower2, 201
Songpa-Dearo, Songpa-gu, Seoul, Korea
F ([phone]
DATA.
CODE.
Video Interface
HYUNDAI-KIA 10b (GRANDEUR)
2023.02.14
HYUNDAI KIA
GRANDEUR
GENESIS G80, G380, DH330 8" / AZERA(GRANDEUR) HD / IG

INSTRUCTION MANUAL
CAR COMPATIBILITY SHEET
BRAND MODEL SCREEN YEAR
HYUNDAI
AZERA/GRANDEUR HD 8" 2014 ~ 2016
AZERA/GRANDEUR IG 8" 2016 ~ 2019
GENESIS G80 8" 2014 ~ 2018
GENESIS G380 8" 2014 ~ 2018
GENESIS DH330 8" 2014 ~ 2018
KIA
STINGAR 7" 2014 ~ 2016
CADENZA/K7 8" 2016 ~ 2019

INSTRUCTION MANUAL
COMPONENT
▶Warning
Please contact your dealer if any component is missing.
▶Warning
Please contact your dealer if any component is missing.
INTERFACE (BLACK) POWER CABLE (8") LVDS CABLE (BLACK)
MODE SWITCH
Power Cable Type
20PIN 20PIN
FEMALE MALE

INSTRUCTION MANUAL
INTERFACE SPEC
1INPUT
•1 x DIGITAL RGB (HDMI PORT)
•1 x CVBS VIDEO
•1 x CVBS REAR CAM
•1 x LVDS CAMMAND SYSTEM
2OUTPUT
•1 x LVDS OPERATION
4POWER
•Input Power : 8VDC ~ 24VDC
•Consumption Power : 12Watt, Max
5SWITCH INPUT MODE
•Possible to select CAR model while switching mode by DIP S/W
•By button on the Commander in the car via CAN
3TOUCH
•VIRTUAL ANALOG TOUCH (4PIN)
•UART DIGITAL TOUCH

INSTRUCTION MANUAL
EXTERNAL DEVICE SPECIFICATIONS
3 4 5
6 7 8 9 10
2LCD IN 1LCD OUT
5LED
6POWER/CAN 7RESISTIVE TOUCH 8DIGITAL RGB 9FRONT
10 REAR
Interface error
check
4PIN Touch
3DIP SWITCH 4PROGRAM
OSD connection
1 2
White Type White Type

INSTRUCTION MANUAL
PIN FUNCTION
INFORMATION
▲OFF ▼ON
1NAVIGATION USE Do not use
2FRONT CAM USE Do not use
3REAR CAM External
Camera
OEM
Camera
4REAR DETECT CAN WIRE
5~7 NAVI Type
8~10 CAR Type
ON 8 9 10
KIA
CADENZA(K7) -8" (2016~2019)
DIP SWITCH SETTING
ON 1ON 1
2 2
3 3
4 4
ON 8 9 10
HYUNDAI GENESIS
G80 / G380 / DH330 -8" (2014 ~ 2018)
ON 5 6 7
KPLAY2
(Black Board)
KPLAY1 cannot be used
ON 8 9 10
HYUNDAI
AZERA/GRANDEUR-HG - (2014~2016)
ON 8 9 10
KIA
STINGAR -7" (2014 ~ 2016)
ON 8 9 10
HYUNDAI
AZERA/GRANDEUR-IG - (2016~2019)

INSTRUCTION MANUAL
No PORT INFORMATION
1POWER
/CAN
2TOUCH
No. Color Signal Assignment No. Color Signal Assignment
1Red ACC 2Red REAR POWER (Max 200mA)
3Brown REAR DET 4
5Green CAN LOW 6 Orange CAN HIGH
7White CAN LOW 8Purple CAN HIGH
9Blue CAN LOW 10 Red CAN HIGH
11 12 Red ACC
13 Red FRONT POWER (Max 200mA) 14 Green MODE
15 Black GND 16 Black GND
CONNECTOR PIN ASSIGNMENT
1 3 5 7 9 11 13 15
2 4 6 8 10 12 14 16
1 2
No. Color Signal Assignment
1Red Y-
2Green X-
3Blue Y+
4White X+
1 2 3 4
1
2

INSTRUCTION MANUAL
BUTTON CONTROL
AZERA(GRANDEUR) HG -Change Mode to Interface Screen
Hang up
BUTTON PRESS FUNCTION
Hang up
Long press OEM screen to interface screen
Interface screen to the OEM screen
▶Screen change sequence : OEM > NAVI > OEM

INSTRUCTION MANUAL
BUTTON CONTROL
GENESIS G80 / G380 / DH330 -Change Mode to Interface Screen
Hang up
BUTTON PRESS FUNCTION
Hang up
Long press OEM screen to interface screen
Interface screen to the OEM screen
▶Screen change sequence : OEM > NAVI > OEM

INSTRUCTION MANUAL
INSTALL MANUAL
INTERFACE
MONITOR
Male
20PIN
20PIN
Female
GRANDEUR-IG
VIDEO INTERFACE
POWER/CAN TOUCH DIGITAL FRONT REAR
LED DIP_S/WPROGRAM LVDS-IN LVDS-OUT
OEM
LVDS

INSTRUCTION MANUAL
GRANDEUR-IG
VIDEO INTERFACE
POWER/CAN TOUCH DIGITAL FRONT REAR
LED DIP_S/WPROGRAM LVDS-IN LVDS-OUT
INSTALL MANUAL
KPLAY2
B+
GND
ACC
WiFi/Bluetooth
Antenna
MIC In
Audio L/R Out
Knob Controller
Video Out
microphone connection
Connect to vehicle with RCA to AUX
Knob controller is an optional purchase
External monitor connection is optional
USB Type-A (F)
CAR
No. 1 -▲OFF
No. 5 / 6 / 7 -▼/ ▲/ ▼
ON 1 2 3 4 5 6 78 9 10
5 6 7
ON 1
CAR ACC
CAR GND
DIGITAL
UART TOUCH
DET
KEY 1
ILL DET
TOUCH
REAR IN
VIDEO IN
Not Use
Not Use

INSTRUCTION MANUAL
INSTALL MANUAL
KPLAY2 TOUCH
•System
•System ▶Factory Mode
Touch calibration

A-912 Rm Tera-tower2, 201
Songpa-daero, Songpa-gu, Seoul, Korea
F. ([phone]
E. [e-mail]