Sena SRL3 User manual

QUICK START GUIDE ENGLISH / 1.0.0
SRL3
MOTORCYCLE COMMUNICATION SYSTEM
FOR SHOEI COMLINK

Sena Technologies Co., Ltd.
Customer Support: sena.com
Downloadable Sena Software
Download the Sena Motorcycles App on Google Play Store or
App Store.
Sena Motorcycles
• Device Configuration Setting
Download the following items at sena.com.
Sena Device Manager
• Firmware upgrade
• Device configuration setting
Quick Start Guide,
User’s Guide
Follow us on Facebook, YouTube, Twitter and Instagram to check
the latest information and helpful tips.

Product Details
15 6 7 8
12 13 15 1716 1811
243
10 14
9
˝ Status LED
˞ (-) Button
˟ Center Button
ˠ (+) Button
ˡ Antenna (L)
ˢ Clip (L)
ˣ Speaker Connector
ˤ Battery Module
˥ Charging LED
˦ Button Module (L)
˧ Microphone Connector
˨ Speaker (R)
˩ Button Module (R)
˪ Mesh Intercom Button
˫ Speaker (L)
≗ Antenna (R)
≘ Clip (R)
≙ DC Power Charging & Firmware
Upgrade Port

Installation
The following SHOEI helmets are compatible with the SRL3.
• GT-Air 3, Neotec 3
Helmet and Module Cover
2.
1.
3. 4.
1
2

Inner Padding
Battery Module
1.

Wired Boom Microphone
1.
2.
x 2

Wired Microphone
1. 2.

Speakers
1. 2.

Antenna, Clip, and Button Module
2.
1.
3. 4.
1
2

Helmet and Inner Padding
3.
2.
1
2
1.

Icon Legend
1x
TAP Tap button the specified
number of times 10s
HOLD Press and Hold button for the
specified amount of time
“Hello” Audible prompt
Basic Operations
Powering On
1s
HOLD
Volume Up
1x
TAP
Powering Off
1x
TAP
Volume Down
1x
TAP
Checking the Battery Level
Powering On
=
=
=

Phone Pairing
˝ 10s
HOLD “Configuration menu”
˞ 1x
TAP
Blinking
“Phone pairing”
˟ Select SRL3 in the list of Bluetooth
devices detected.
Device B
Pi
Bluetooth
SRL3
• The headset will enter the Phone Pairing mode automatically when
you initially turn on the headset.
• For more information on phone pairing, refer to the User’s Guide.

Using the Phone
Answer a Call
1x
TAP
Reject a Call
2s
HOLD
End a Call
2s
HOLD
Siri and Google Assistant
Activate the Siri or Google Assistant Installed on Your Phone
“Hey Google”
or “Hey Siri” or 3s
HOLD

Speed Dial
˝ Enter into the Speed Dial.
3s
HOLD “Speed dial”
˞ Navigate between Speed Dial Preset numbers.
1x
TAP
or
1x
TAP
(1) Last number redial
(2) Speed dial 1-3
(3) Cancel
˟ Call the Speed Dial Preset number.
1x
TAP
Note: Before using speed dial, you need to assign the speed
dial presets through the Sena Device Manager or the Sena
Motorcycles App.

Music Control
Play/Pause
1s
HOLD
Track Forward
1s
HOLD
Track Back ward
1s
HOLD
Mesh Intercom™
Open Mesh™: communication within the same channel.
Group Mesh™: communication within the same private group.
• For more information on Mesh Intercom, refer to the User’s Guide.
Mesh Intercom On
1x
TAP
Blinking
“Mesh intercom on,
Open Mesh, channel 1”
Mesh Intercom Off
1x
TAP “Mesh intercom off”
Note: When Mesh Intercom is on, the SRL3 will automatically
connect to nearby SRL3 users and the headset will be in Open
Mesh (default: channel 1) initially.

Open Mesh
Channel Setting (Default: channel 1) in Open Mesh
˝ Enter into the Channel Setting.
2x
TAP “Channel setting, 1”
˞ Navigate between channels.
(1 2 ••• 8 9 Exit 1 •••)
1x
TAP
or
1x
TAP
“#”
˟ Save the channel.
1x
TAP “Channel is set,
channel #”
Note: You can use the Sena Motorcycles App to change the
channel.

Group Mesh
Group Mesh is a closed group intercom function that allows users to
join, leave, or rejoin a group intercom conversation without pairing
each headset.
1) Creating a Group Mesh
Creating a Group Mesh requires two or more Open Mesh users.
Open Mesh Group Mesh
You
B
C
You B C
˝ Users (You, B, and C) enter into Mesh Grouping to create a
Group Mesh.
5s
HOLD “Mesh grouping”
˞ When Mesh Grouping is completed, the users (You, B and C) will
hear a voice prompt on their headsets as Open Mesh switches to
Group Mesh.
You B C
“Group Mesh”

2) Joining an Existing Group Mesh
One of the current users in an Existing Group Mesh can allow new
users (one or more) in Open Mesh to join the Existing Group Mesh.
Existing
Group Mesh Open Mesh Existing Group Mesh
F
D
You
B
C
You
D
B
F
C
˝ One (You) of the current users in the Existing Group Mesh and
new users (D and F) in Open Mesh enter into Mesh Grouping to
join the Existing Group Mesh.
5s
HOLD “Mesh grouping”
˞ When Mesh Grouping is completed, the new users (D and F) will
hear a voice prompt on their headsets as Open Mesh switches to
Group Mesh.
D F
“Group Mesh”

Enable/Disable Mic (Default: Enable)
Users can enable/disable the microphone when communicating in a
Mesh Intercom.
1s
HOLD “Mic on” or “Mic off”
Mesh Reach-Out Request
You (caller) can send a request message to turn on the Mesh Intercom
to nearby friends who have it turned off.
˝ If you want to send or receive a request massage, you need to
enable Mesh Reach-Out on the Sena Motorcycles App.
˞ While your headset’s Mesh Intercom is on, you (caller) send a
request message using the headset’s Button or the Sena
Motorcycles App.
[Caller]
3x
TAP
[Caller]
“Mesh reach-out request”
[Nearby Friends]
“Mesh intercom requested”
˟ Friends who receive the request message need to manually turn
on their Mesh Intercom using the headset’s Button or the Sena
Motorcycles App.

Reset Mesh
If the headset in an Open Mesh or Group Mesh resets the Mesh, it
will automatically return to Open Mesh (default: channel 1).
8s
HOLD “Reset Mesh”
Bluetooth Intercom
Up to three other people can be paired with the headset for
Bluetooth intercom conversations.
A
B
C
D
YOU
Intercom Pairing
There are two ways to pair the headset.
Using the Smart Intercom Pairing (SIP)
SIP allows you to quickly pair with your friends for intercom
communication by scanning the QR code on the Sena Motorcycles
App without remembering the button operation.