Sencore Mrd 2600 User manual

August 2021

8104S www.sencore.com | 1.605.978.4600 Revision 1.19

MRD 2600

Modular Receiver

User Manual

MRD 2600 –User Manual

Page 2 (87)

3200 Sencore Drive, Sioux Falls, SD USA

www.sencore.com

This publication containsconfidential, proprietary, andtrade secret information. No part ofthis document may

be copied, photocopied, reproduced, translated, or reduced to any machine-readable or electronic format

without prior written permissionfrom Sencore. Information in this document is subjectto change without notice

and Sencore Inc. assumes no responsibility or liability for any errors or inaccuracies. Sencore, Sencore Inc,

and the Sencore logo are trademarks or registered trademarks in the United States and other countries. All

other products or services mentioned in this document are identified by the trademarks, service marks, or

product names as designated bythe companies who market those products. Inquiries should be made directly

to those companies. This document may also have links to third-party web pages that are beyond the control

of Sencore. The presence of such links does not imply that Sencore endorses or recommends the content on

those pages. Sencore acknowledges the use of third-party open source software and licenses in some

Sencore products. This freely available source code can be obtained by contacting Sencore Inc.

About Sencore

Sencore is an engineering leader in the development of high-quality signal transmission solutions for the

broadcast, cable, satellite, IPTV, telecommunications, and professional audio/video markets. The

company’s world-class portfolio includes video delivery products, system monitoring and analysis solutions,

and test and measurement equipment, all designed to support system interoperability and backed by best-

in-class customer support. Sencore meets the rapidly changing needs of modern media by ensuring

efficient delivery of high-quality video from the source to the home. For more information, visit

www.sencore.com.

MRD 2600 –User Manual

Page 3 (87)

Revision History

Date

Version

Description

Author

06/10/2013

1.0

Initial Release (1.2.0 software)

NDM

08/30/2013

1.1

Update for ver. 1.2.0 Release

NGJ

11/21/2013

1.2

Update for ver. 1.3.0 Release

NGJ

3/11/2014

1.3

Update for ver. 1.4.0 Release

CDP

5/14/2014

1.4

Update for ver. 2.0.0 Release

CDP

9/18/2014

1.5

Update for ver. 2.1.0 Release

CDP

3/1/2015

1.6

Update for ver. 2.2.2

JDF

3/12/2015

1.7

Update for ver. 2.3.0

CDP

7/8/2015

1.8

Update for ver. 2.4.0

CDP

10/21/2015

1.9

Update for ver. 2.5.0

CDP

3/1/2016

1.10

Update for ver. 3.0.0

CDP

6/6/2016

1.11

Update for ver. 3.1.0

CDP

9/28/2016

1.12

Update for ver. 3.2.0

CDP

4/07/17

1.13

Update for 3.3.0

ACD

1/27/2020

1.14

Appending to S2X Module Specs

BCR

07/21/2020

1.15

Update for 4.2.3 Release

RAG

09/02/2020

1.16

Updated screenshots for new GUI

RAG

10/12/2020

1.17

Update for 4.3.0 Release

JDN

01/28/2021

1.18

Update for 4.4.0 Release

RAG

8/17/2021

1.19

Change PID filter from 10 to 5

IWG

MRD 2600 –User Manual

Page 4 (87)

Safety Instructions

•Read these instructions

•Keep these instructions

•Heed all warnings

•Follow all instructions

•Do not use this apparatus near water

•Clean only with dry cloth

•Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions

•Do not install near any heat sources such as radiators, heat registers, stoves, or

other apparatus (including amplifiers) that produce heat

•Do not defeat the safety purpose of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding type

plug has two blades and a third grounding prong. The wide blade or the third

prong is provided for your safety. If the provided plug does not fit into your outlet,

consult an electrician for replacement of the obsolete outlet.

•Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

•Only use attachments/accessories specified by the manufacturer.

•Unplug this apparatus during lightning storms or when unused for long periods of

time.

•Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not operate normally, or

has been dropped.

•Do not expose this apparatus to dripping or splashing and ensure that no objects

filled with liquids, such as vases, are placed on the apparatus.

•To completely disconnect this apparatus from the AC Mains, disconnect the

power supply cord plug from the AC receptacle.

•The mains plug of the power supply cord shall remain readily operable.

•Damage Requiring Service: Unplug this product from the wall outlet and refer

servicing to qualified service personnel under the following conditions:

oWhen the power-supply cord or plug is damaged.

oIf liquid has been spilled, or objects have fallen into the product.

oIf the product has been exposed to rain or water.

oIf the product does not operate normally by following the operating

instructions. Adjust only those controls that are covered by the

operating instructions as an improper adjustment of the controls may

result in damage and will often require extensive work by a qualified

technician to restore the product to its normal operation.

oIf the product has been dropped or damaged in any way.

oThe product exhibits a distinct change in performance.

•Replacement Parts: When replacement parts are required, be sure the service

technician uses replacement parts specified by Sencore, or parts having the

MRD 2600 –User Manual

Page 5 (87)

same operating characteristics as the original parts. Unauthorized part

substitutions made may result in fire, electric shock or other hazards.

SAFETY PRECAUTIONS

There is always a danger present when using electronic equipment.

Unexpected high voltages can be present at unusual locations in defective

equipment and signal distribution systems. Become familiar with the equipment

that you are working with and observe the following safety precautions.

•Every precaution has been taken in the design of your MRD 2600 to ensure that

it is as safe as possible. However, safe operation depends on you the operator.

•Always be sure your equipment is in good working order. Ensure that all points

of connection are secure to the chassis and that protective covers are in place

and secured with fasteners.

•Never work alone when working in hazardous conditions. Always have another

person close by in case of an accident.

•Always refer to the manual for safe operation. If you have a question about the

application or operation call Sencore for assistance.

•WARNING –To reduce the risk of fire or electrical shock never allow your

equipment to be exposed to water, rain or high moisture environments. If exposed

to a liquid, remove power safely (at the breaker) and send your equipment to be

serviced by a qualified technician.

•To reduce the risk of shock the MRD 2600 must be connected to a mains socket

outlet with a protective earthing connection.

•For the MRD 2600 the mains plug isthemain disconnect and should remain readily

accessible and operable at all times.

The MRD 2600 is equipped with an internal system battery. The MRD 2600 must

be sent to Sencore service for replacement of this battery.

•When installing the MRD 2600 utilizing the DC power supply, the power supply

MUST be used in conjunction with an over-current protective device rated at 50 V,

5 A, type: Slow-blo, as part of battery-supply circuit.

•To reduce the risk of shock and damage to equipment, it is recommended that the

chassis grounding screw located on the rear of the MRD 2600 –be connected to

the installation’s rack, the vehicle’s chassis, the battery’s negative terminal, and/or

earth ground.

CAUTION –Danger of explosion if battery is incorrectly replaced. Replace only

with the same or equivalent type.

MRD 2600 –User Manual

Page 6 (87)

FCC Class A Information

The MRD 2600 has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in which case the user will be

required to correct the interference at his or her own expense.

Shielded cables must be used with this unit to ensure compliance with the Class A FCC

limits.

Warning: Changes or modifications to this unit not expressly approved by the

party responsible for compliance could void the user’s authority to operate the

equipment.

MRD 2600 –User Manual

Page 7 (87)

Package Contents

The following is a list of the items that are included along with the MRD 2600:

1. Declaration of Conformity

2. AC Power Cable

3. Quick Start Guide

Note: If any option cables were ordered with the MRD 2600 they will be included in the

box as well.

If any of these items were omitted from the packaging of the MRD 2600 please call 1-800-

SENCORE to obtain a replacement. Manuals for Sencore products can be downloaded at

www.sencore.com

1) Declaration of Conformity

2) AC Power Cable

3) Quick Start Guide

MRD 2600 –User Manual 
Page 8 (87)
 
 
 
Table of Contents 
 
Section 1 Overview...........................................................................................10 
1.1 Product Introduction..............................................................................................11 
1.2 Front Panel Overview............................................................................................11 
1.3 Rear Panel Overview ............................................................................................11 
1.4 Cooling..................................................................................................................12 
1.5 Rack Information...................................................................................................12 
Section 2 Installation........................................................................................13 
2.1 Rack Installation....................................................................................................14 
2.2 Power Connection.................................................................................................14 
2.3 AC Power Connection...........................................................................................14 
2.4 AC Dual Redundant Power Connection (optional)..................................................15 
2.5 DC Power Connection...........................................................................................15 
2.6 Maintenance .........................................................................................................15 
2.7 Network Setup via Front Panel..............................................................................15 
Section 3 Operating the Front Panel...............................................................18 
3.1 MRD 2600 Front Panel Overview..........................................................................19 
Section 4 Operating the Web Interface ...........................................................20 
4.1 MRD 2600 Web Interface Overview.......................................................................21 
 Logging into the MRD 2600 Web Interface .......................................................21 
 Hiding Unused Inputs.......................................................................................21 
 Buttons and Status Indicators...........................................................................21 
 Drag and Drop Menus......................................................................................22 
4.2 Main Panel............................................................................................................23 
 Configuring Active Inputs..................................................................................24 
 Configuring ASI Input.......................................................................................26 
 Configuring MPEG/IP Input ..............................................................................27 
 Configuring DVB-S/S2/S2X Input......................................................................30 
 Configuring DVB-S/S2 Input.............................................................................32 
 Configuring 8VSB/QAM Input...........................................................................34 
 Configuring Turbo PSK Input............................................................................35 
 Configuring DVB-T2/C2/ISDB-T Input...............................................................36 
 Configuring DVB-CI Descrambling....................................................................38 
 Configuring Conditional Access........................................................................41 
 PID Filter..........................................................................................................43 
 Configuring ASI Output.....................................................................................44 
 Configuring the MPEG/IP Outputs....................................................................45 
 Configuring the MPEG/IP MPE Outputs............................................................47 
 Viewing PSIP Information.................................................................................49 
4.3 Admin Panel..........................................................................................................50 
 Changing Unit Password..................................................................................50 
 Profiles.............................................................................................................51 
 General Settings ..............................................................................................52 
 Unit Network Configuration...............................................................................52 
 TACACS+ Configuration...................................................................................53 
 MPEG/IP Network Configuration.......................................................................55 
 Licensing..........................................................................................................57 
 Date/Time........................................................................................................57 
 Configuring SNMP............................................................................................58 
 Syslog..............................................................................................................60 

MRD 2600 –User Manual 
Page 9 (87)
 
 
 
 In-Band Control................................................................................................61 
 Updating the MRD 2600...................................................................................61 
 Reboot Unit......................................................................................................63 
 Reset Defaults..................................................................................................63 
4.4 Reporting Panel ....................................................................................................64 
 Active Alarms...................................................................................................64 
 Event Logs.......................................................................................................65 
 Configuring the Logs ........................................................................................66 
4.5 About Panel ..........................................................................................................68 
Section 5 Appendices.......................................................................................69 
 –Acronyms and Glossary....................................................70 
 –Error and Event List...........................................................73 
 –Specifications.....................................................................75 
 –Pinouts for Relay Connectors...........................................83 
 –Open Source Software.......................................................84 
 –Warranty .............................................................................86 
 –Support and Contact Information.....................................86 
 