Sencore MRD 4400 User manual
Quick Start
MRD 4400 Advanced Modular Receiver
1Contents
Unpack the MRD 4400 from the box
and packaging materials it was shipped
in. Verify all of the following items are
present:
• MRD 4400 Advanced Modular Receiver
1x
• Line Cord
1x
• User Manual CD
1x
If any of these items are missing or
damaged, please contact Sencore to
obtain replacements.
Installation Management Port
The MRD 4400 can be managed through its web interface, SNMP or
the front panel. To use the web GUI or SNMP, the management IP
address must be congured. Contact your IT department if you are
unsure of these settings.
DHCP IP Address Setup:
1.Press
2.Use and to move the cursor to “Admin”, then press
3.Use and to move the cursor to “Unit Networking:” then press
4.Press
5.Use and to move the cursor to “DHCP”, then press
6.Use and to change the selection to, “Enabled”, then press to save.
Static IP Address Setup:
1.Use and to move the cursor to “DHCP”, then press
2.Use and to change the selection to “Disabled” and then press to
save.
3. Use and to select the column to edit and use and to change
the IP and then press to save.
4.The cursor will now be on, “Mask.”
5.Use and to select the column to edit and use and to change
the Subnet Mask, then press to save.
6.The cursor will now be on, “Gateway.”
7.Use and to select the column to edit and use and to change
the Gateway, then press to save.
Open a web browser (IE 7 or above, Firefox 3.5 or above, or Chrome) and type:
http://<IP Address> Default password is blank.
1.Secure the MRD 4400 into the rack space.
2.Make all appropriate I/O connections on the
back of the unit.
3.Connect an Ethernet Cable from a
management network to the LAN port.
4.Connect the line cord and move the power
switch from 0 to I to power on the unit.
23
Congratulations on purchasing the MRD 4400. Follow these installation and conguration instructions to get started. Use the web
interface for easiest conguration. If you need assistance, please contact Sencore ProCare at (605) 978-4600 or procar[email protected].
Form 8086A
3200 W. Sencore Dr. |Sioux Falls, SD 57107 |T605.978.4600 |www.sencore.com
Declaration of Conformity
In accordance with EN ISO 17050-1:2004
Corporate Name: SENCORE, Inc.
Corporate Address: 3200 Sencore Dr.
Sioux Falls, SD 57107
Declares that the product:
Product Name: Modular Receiver, Modular Receiver, Advanced Modular Receiver
Product Model: MRD 2600, MRD 4400, MRD 5800
Conforms to the following standards:
Safety: IEC 60065:2001 (Seventh Edition)+ A1:2005 + A2:2010
EMC: EN 55022:2010 / AC:2011 / CISPR 22(ed.6) (Emission)
EN 61000-3-2:2006 +A1:2009 +A2:2009 / IEC 61000-3-2(ed.3);am1;am2
(Power Line Harmonics)
EN 61000-3-3:2008 / IEC 61000-3-3(ed.2) (Power Line Flicker)
EN 55024:2010/ CISPR 24(ed.2) (Immunity)
EN 61000-4-2:2009 (ESD)
EN 61000-4-3:2006+A2:2010 (Electromagnetic Field)
EN 61000-4-4:2004+A1:2010 (EFT)
EN 61000-4-5:2006 (Surge)
EN 61000-4-6:2009 (Conducted RF Immunity)
EN 61000-4-11:2004 (Mains Voltage Dip/Fluctuation)
EU Directive: Safety 2006/95/EC
EMC 2004/108/EC
RoHS 2002/95/EC;2011/65/EU
Signed by: Tim Graham
Title: Director of Quality
Date: 7/9/2013
Table of contents
Other Sencore Receiver manuals
