Sencore MRD 2600 User manual

Quick StartQuick Start
MRD 2600 Modular Receiver
1Contents
Unpack the MRD 2600 from the box
and packaging materials it was shipped
in. Verify all of the following items are
present:
• MRD 2600 Modular Receiver
1x
• Line Cord
1x
If any of these items are missing or
damaged, please contact Sencore to
obtain replacements.
The user manual can be downloaded
from the MRD 2600 product page on the
Sencore website: www.sencore.com
Installation Management Port
The MRD 2600 can be managed through its web interface, SNMP or the
front panel. To use the web GUI or SNMP, the management IP address
must be congured. Contact your IT department if you are unsure of these
settings.
DHCP IP Address Setup:
1. Press
2. Use and to move the cursor to “Admin”, then press
3. Use and to move the cursor to “Unit Networking:” then press
4. Use and to move the cursor to “Primary Unit Networking”,
then press
5. Press
6. Press the use and to change the selection to “DHCP”
7. Press to save (any changes will be reverted if save is not completed)
Static IP Address Setup:
1. Complete steps 1-5 of the “DHCP IP Address Setup:”
2. Press then use and to change the selection to “Static”
3. Press to save.
4. Use and to select the column to edit and use and to change
the IP and then press to save.
5.The cursor will now be on, “Mask.”
6.Use and to select the column to edit and use and to change
the Subnet Mask, then press to save.
7.The cursor will now be on, “Gateway.”
8.Use and to select the column to edit and use and to change
the Gateway, then press to save.
Open a web browser (IE 7 or above, Firefox 3.5 or above, or Chrome) and type:
http://<IP Address> Default password is “mpeg101”
1.Secure the MRD 2600 into the rack space.
2.Make all appropriate I/O connections on the
back of the unit.
3.Connect an Ethernet Cable from a
management network to the LAN port.
4.Connect the line cord to power on the unit.
23
Congratulations on purchasing the MRD 2600. Follow these installation and conguration instructions to get started. Use the web
interface for easiest conguration. If you need assistance, please contact Sencore ProCare at [phone] or [e-mail].
www.sencore.com | 605.978.4600 | procar[email protected] | Copyright © Sencore Inc. 2020
Form 8100E

3200 W. Sencore Dr. |Sioux Falls, SD 57107 |T605.978.4600 |www.sencore.com
Declaration of Conformity
In accordance with EN ISO 17050-1:2004
Corporate Name: SENCORE, Inc.
Corporate Address: 3200 Sencore Dr.
Sioux Falls, SD 57107
Declares that the product:
Product Name: Modular Receiver, Modular Receiver, Advanced Modular Receiver
Product Model: MRD 2600, MRD 4400, MRD 5800
Conforms to the following standards:
Safety: IEC 60065:2001 (Seventh Edition)+ A1:2005 + A2:2010
EMC: EN 55022:2010 / AC:2011 / CISPR 22(ed.6) (Emission)
EN 61000-3-2:2006 +A1:2009 +A2:2009 / IEC 61000-3-2(ed.3);am1;am2
(Power Line Harmonics)
EN 61000-3-3:2008 / IEC 61000-3-3(ed.2) (Power Line Flicker)
EN 55024:2010/ CISPR 24(ed.2) (Immunity)
EN 61000-4-2:2009 (ESD)
EN 61000-4-3:2006+A2:2010 (Electromagnetic Field)
EN 61000-4-4:2004+A1:2010 (EFT)
EN 61000-4-5:2006 (Surge)
EN 61000-4-6:2009 (Conducted RF Immunity)
EN 61000-4-11:2004 (Mains Voltage Dip/Fluctuation)
EU Directive: Safety 2006/95/EC
EMC 2004/108/EC
RoHS 2002/95/EC;2011/65/EU
Signed by: Michael Carr
Title: Senior Manufacturing Manager
Date: 2/3/2017