Sennheiser ME 34 Dimensions

Microphones | Installed Sound
Kit Includes:
ME 34 Capsule
MZH 3015 Gooseneck
MZT 30 XLR Receptacle
MZS 31 Shockmount
General Description
Sennheiser’s modular Installed Sound Series microphones kits for podium,
hanging, boundary layer and table stand applications facilitate all possible
installation configurations at affordable prices. At the heart of the series are
three superbly engineered capsules: the ME 34 cardioid, the ME 35 super cardioid
and the unique lobar-patterned ME 36 mini shotgun. Each capsule can interface
with three different goosenecks: the 15 cm MZH 3015 (6"), the 40 cm MZH 3040
(15.75") and the dual flex 40 cm MZH 3042 (15.75"), all designed to maintain
proper capsule placement. Each system requires 12-48 volt phantom power.
All contact points are gold plated and corrosion resistant. All components have
anti-reflective matte black surfaces.
Technical Data
Acoustic operating principle Pressure gradient transducer
Pick-up pattern Cardioid
Frequency response 40–20,000 Hz
Sensitivity (free field, no load) 10 mV/Pa
Electrical impedance 50 Ω
Min. terminating impedance 1 K Ω
Equivalent noise level 26 dB-A
37 dB-CCIR
Power supply P 12–P 48
Dimensions .47" x .71" (11.93 x 18.03 mm)
Weight .30 oz.
Connector XLR-3
.69"
[17.53mm]
Ø.48"
[12.19mm]
ME34
MZH3015
MZT30
MZS31
ME 34
Polar Pattern Frequency Response Graph
i15-C
Cardioid patterned condenser microphone capsule. Its wide
cardioid pattern is excellent for universal miking applications.
.68"
[17.3mm]
2.96"
[75.2mm]
5.59"
[142.0mm]
1.95"
[49.5mm]
Ø .74"
[18.8mm]
Ø.32"
[8.1mm]
The MZH 3015 is a metal gooseneck for use with the ME 34, ME 35
and ME 36 microphone capsules and is 15 cm (6") in length.
It features a rugged anti-reflective matte black coating and uses
a balanced floating XLR-3 connector with standard polarity.
MZH 3015
i15-C
CBinder - MIcrophones.indd 3 11/11/08 2:22:59 PM

.10"
[2.5mm]
1.08"
[27.4mm]
Ø.14"
[3.6mm]
Ø1.15"
[29.2mm]
Ø1.43"
[36.3mm]
Ø.66"
[16.8mm]
Ø.75"
[19.0mm]
Ø.94"
[23.9mm]
MZT 30
MZS 31
1.96"
[49.8mm]
1.66"
[42.2mm] 2.30"
[58.4mm]
.34"
[8.6mm]
Ø2.88"
[73.2mm]
Ø.17"
[4.3mm]
Ø2.36"
[59.9mm]
Ø2.00"
[50.8mm]
Ø1.61"
[40.9mm]
The MZT 30 is a rugged metal XLR female receptacle for panel
or chassis mounting manufacturer by Switchcraft. Its flange
has three .140" (3.57 mm) diameter holes for #5-40 mounting
screws (not supplied). Mounts from front of panel or chassis in
0.953" (24.21 mm) diameter hole. Rugged press release tab
insures a secure fit and sound connection.
The MZS 31 is a quick installation shockmount for
MZH 3015(L), MZH 3040(L) and MZH 3042(L) goosenecks. It
requires a 50 mm (2") mounting hole.
i15-C
Sennheiser Electronic Corporation • 1 Enterprise Drive • Old Lyme, CT 06371
Architects Specifications
The podium mic system shall be modular and facilitate integration of different polar-patterned capsules with goosenecks of varying lengths. It must
utilize a condenser transducer element operational with 48v phantom power and have a frequency response of 40 Hz–20,000 Hz. The transducer
must have cardioid directional characteristics and be small and streamlined, no longer than 18 mm with a diameter no larger than 12.2 mm. (.5").
The gooseneck must also be streamlined in appearance, with a boom diameter of 8 mm (.31") and an overall length of 15 cm (5.9"). It must also be
finished with a durable anti-reflective matte black coating and have a pre-amp housed with its XLR connector housing. The podium mic system must
be mountable using either a direct to surface receptacle or via a silent shock mount system. The system must be a Sennheiser i15-C.
Limited Product Warranty/Service
Sennheiser Electronic Corporation extends the following limited product warranty for Sennheiser products:
The warranty period for all covered Sennheiser products is two years from the date of purchase. Not covered by this warranty are accessories and other consumables;
for example, items of wear and tear, such as cables. During the warranty period, Sennheiser Electronic Corporation warrants that the Sennheiser equipment will be
free from defects in materials and workmanship used in making the product. Abnormal conditions, deliberate abuse and damage due to accidents, operator’s error,
or unauthorized service attempts are excluded from any warranty claims.
Under this warranty, Sennheiser Electronic Corporation will repair, or at its option, replace free of charge the covered defective Sennheiser product, provided it is returned
(postage paid, with proof of purchase from the original seller) to a Sennheiser Service Facility. Products should be returned in their original package, or otherwise suitably
protected to avoid shipping damage. Either product registration or a valid, dated proof of purchase is accepted to establish the warranty period. The Sennheiser Service
Department will be the sole authority to determine the validity of all warranty issues.
This Limited Product Warranty is Sennheiser Electronic Corporation’s only warranty, and the customer’s only remedy concerning Sennheiser products. All other rep-
resentations and warranties, express or implied, written or oral, including, but not limited to, any warranties of merchantability, fitness for a particular purpose, or
non-infringement, are expressly excluded. As a result, except as set forth in the previous paragraphs, the product is sold “as-is” and the customer is assuming the
entire risk as to the product’s suitability for his needs, its quality and its performance.
In no event will Sennheiser Electronic Corporation be liable for direct, indirect, special, incidental or consequential damages resulting from any defect in the product or
from its use, even if advised of the possibility of such damages.
CBinder - MIcrophones.indd 4 11/11/08 2:23:00 PM