Cat. No. 002872
MKH 30 P 48
Microphones | RF Symmetrical Capsule
Condenser Microphone
General Description
The symmetrical transducer design of the figure-of-eight MKH 30 produces
an unusually wide and smooth frequency response. It is particularly suited
to soloists and small instrumental groups and can also serve as an ‘S’
microphone in MS stereo applications. As a support microphone it is
particularly useful in the effective suppression of sounds from adjacent
sound sources.
Features
j
High rejection of lateral sounds
j
Exceptionally low inherent self-noise
j
Symmetrical transducer technology ensures extremely low distortion
j
Transformerless and fully floating balanced output
j
Switchable roll-off filter to compensate for proximity effects at a
distance of approx. 0.5 m
j
Switchable pre-attenuation
j
Black, anodised light metal body
j
Delivery includes: 1 MKH 30, 1 MZS 80 shock mount,
1 MZW 41 windshield
Recommended Accessories
j
MZA 14 P 48 U battery power supply unit Cat. No. 002960
j
MZT 441 table stand Cat. No. 000799
j
MZT 100 table stand Cat. No. 001883
j
MZD 30 dual clip, for MS stereo Cat. No. 002990
j
MZB 415 fish pole Cat. No. 000972
j
MZS 80 shock mount Cat. No. 003685
j
MZW 41 foam windshield Cat. No. 029681
j
MZP 40 popshield Cat. No. 003132
j
MZS 20-1 shock mount Cat. No. 003609
j
MZW 20-1 basket windshield Cat. No. 003606
j
MZH 20-1 hairy cover Cat. No. 003610
Technical Data
Pick-up pattern ..........................................................figure-of-eight
Frequency response .................................................40 – 20,000 Hz
Sensitivity (free field, no load, 1 kHz)......... 25 (8) mV/Pa ± 1dB
Nominal impedance ................................................................. 150 Ω
Min. terminating impedance..................................................... 1 kΩ
Equivalent noise level
A-weighted (DIN IEC 651)............................................... 13 (19) dB
CCIR-weighted (CCIR 468-3)........................................... 22 (28) dB
Max. sound pressure level .........................134 (142) dB at 1 kHz
Power supply........................................................phantom 48 ± 4 V
Supply current............................................................................. 2 mA
Dimensions ................................................................Ø 25 x 174 mm
Weight ...........................................................................approx. 110 g
Values in parentheses with attenuator switched on (–10 dB)
Cable pictured is an accessory not supplied with the microphone
Profile
Figure-of-eight studio directional microphone with switch-
able pre-attenuation and switchable roll-off filter. Frequency
response 40 – 20,000 Hz, sensitivity (free field, no load)
25 (8) mV/Pa ± 1 dB at 1 kHz, nominal impedance 150 Ω,
min. terminating impedance 1 kΩ, equivalent noise level
A-weighted 13 (19) dB, CCIR-weighted 22 (28) dB, max. SPL
134 (142) dB at 1 kHz, phantom powering 48 ± 4 V, supply
current 2 mA, dimensions Ø 25 x 174 mm, weight approx. 110 g.
Values in parentheses with attenuator switched on (–10 dB).
Effect of switchable roll-off filter
