Senrun UT-616F User manual

UT-616F / UR-616F
UT-616F
UR-616F
PH-01
BM-103
Instruction Manual
Wireless Assistive Listening System /
Oral multi-languages translating system /
Tour Guide System
Belt-Pack
Transmitter
Belt-Pack
Receiver
Thank you for choosing this Wireless Assistive Listening
System. In order to perform at its best before operating the unit,
please read this manual thoroughly, and return it for future
reference.

NOTE ON UNIT OPERATION:
When using lavaliere microphone, try to place capsule close to the mouth while
doing, so do not turn high up the volume as it cannot achieve the best reception.
Transmitter (UR-616F) / Receiver (UT-616F)
It is a quality belt-pack UHF wireless transmitter. It is designed to
be used with a compatible UHF wireless receiver in many
application including tour guide use, oral multi-languages
translating system, audio-visual languages teching, auditoriums,
outdoor activities, among many others.
Operation/Helpful Hints
(1) A compatible transmitter must be able to transmit on the
same operating channel as the Receiver
Note:the setting of the “CH 1-16” switch on the Receiver as
required.
(2) Note that the cord of the clip on earphone assembly also
provides the antenna for the Receiver For maximum
sensitivity, do not hold the earphone cord.
(3) Adjust the volume control for a comfortable and intelligible
listening level in the connected clip-on earphone.
Diagram 1
To set up earphone properly and comfortable,
please use W type to be set on front of the
ear, and incline the cable head on the rear
side.

Descriptions of Parts
1.Power switch: Power on / Power off.
2.Neck strap jack
3.Power indicator: The red light indicator will be flash once when
turn it on. The red light indicator will be solid red when the
batteries are almost out of power.
4.Volume Control: Adjusted by turning clockwise to the volume
adjustment knob.
5.3.5 mmØ mcirophone input jack for transmitter and earphone
input jack for receiver.
6.Channel selector: Channel 1- 16. To set up channel properly
and match up to belt pack transmitter and receiver.
7.Battery chamber cover: To put batteries in and take out from
this chamber cover.
8.Battery compartment: 1.5V(AAA) x 2. Align the negative or
positive polarities properly.
1
2
3
4
5
6
7
8
<Front> <Rear>
When inserting the batteries. Remove the batteries when not been
used for a long period of time to keep the batteries life longer.
Options: Headset or Lavaliere microphone.

SPECIFCATIONS
SENRUN ELECTRONICS CO., LTD.
ECEN ELECTRONICS CO., LTD.
No.26-13-1, Fongle Road, Beitun District,
Taichung City, 40673,Taiwan, R.O.C.
TEL:[phone]
FAX:[phone]
E-mail:[e-mail]
http://www.ecen.com.tw
Model UT-616F UR-616F
Microphone Type Condenser type
Oscillation Mode Microprocessor PLL synthesized controlled
Carrier Frequency Range 680~960MHz
Channel synthesized controlled 16 channel
S/N Ratio 80dB overall
Spurious Emission <-50dBc
Power Output Max 10mW
Currency Consumption 50mA±10mA 70mA±10mA
Sensitivity -90dBm±2dBm
Deviation ±40KHz
Stability <±0.005%
T.H.D. <0.5% (At 1 KHz)
Frequency Response 100Hz~15KHz (±3dB)
Antenna Built in
Operation Range 60m
Battery Life 8~10 hours
Audio Input 3.5mm jack
Dimension(HxWxD)mm 85 x 60 x 19 mm
Weight 60g
Battery AAA x 2(UM-4)