Widex CROS FUSION User manual

WIDEX CROS QUICK GUIDE
For CROS/BiCROS Solutions
Models and Compatibility
WIDEX CROS Receiving Hearing Aid
Features
Can be matched to all UNIQUE or DREAM models
at all price points*
Low battery drain = Longer battery life
• FUSION: 1.0mA (150 hrs.)
• FASHION: 1.2mA (120 hrs.)
Slim design BTE model for CROS and BiCROS solutions
CROS Transmission Volume Control (FASHION only)
CROS Transmission Auto OFF with Auto ON selection
WidexLink™wireless technology
Available in FUSION and FASHION BTE
*Not available with CIC MICRO model
Any WIDEX UNIQUE™or WIDEX DREAM™Models*
For additional support,
please call Widex at 1-800-221-0188 or visit www.widexpro.com

DRM236/0617
1Select and connect receiving hearing aid.
3Go to handling.
Select CROS/BiCROS.
Start matching.
2Fit and program receiving hearing aid.
5Matching begins.
4Select ‘Type of Fitting’,
‘Microphone Mode’ and
activation control.
6Matching complete.
8Demonstrating CROS/BiCROS.
Follow directions on screen.
WIDEX CROS QUICK GUIDE
For CROS/BiCROS Solutions
Fitting and Matching CROS in COMPASS™GPS
NOTE: If the CROS is set to “auto-activate streaming” and the CROS/BiCROS matching needs to be reset,
please follow these steps:
1) open and close the CROS battery door,
2) press the program button on the CROS one time to stop CROS transmission,
3) choose “delete matching”on the CROS fitting screen, 4) Follow step 3-8 to start the matching process again.
7CROS fitting complete.
Select ‘Start Demonstration Mode’.
Note: This message is only if the CROS/BiCROS configuration
needs to be modified, not for gain or balance fine tuning