Unitron uTV 2 User manual

uTV 2
quick setup
guide
Distributor
Package contents
The complete Unitron uTV 2consists of the
following elements:
(h) Power supply with
mini-USB plug and
country adapter
(i) Audio cable for
RCA/Cinch sockets
(j) Audio cable
for 3.5mm jack
sockets
(k) SCART/Peritel
adapter (optional)
uDirect 2*
uTV 2
*The uDirect 2is sold separately.
Note: please see your uDirect 2guide for
complete information on the uDirect 2accessory.
Green for 2 seconds ON
Slow blink green No audio signal
Solid blue Audio transmission
Slow blink blue Pause
Rapid blink blue Pairing
uTV 2LED status
B/16-034 029-5895-02 © 2016 Unitron. All rights reserved.
unitron.com
Unitron Hearing, a division of
National Hearing Services Inc.
20 Beasley Drive, P.O. Box 9017,
Kitchener, ON N2G 4X1 Canada
Sonova AG
Laubisrütistrasse 28
CH-8712 Stäfa, Switzerland

Step 1
Connect power and audio cables
Step 3
Pairing uDirect 2
and uTV 2
Press and hold and on uDirect 2
simultaneously for 2 seconds to begin pairing
Press and hold
on uTV 2for 5 seconds.
uDirect 2will remain
in pairing mode for 2
minutes or until pairing
is complete
Bluetooth indicator lights on both uDirect 2and
uTV 2turn solid blue when pairing is completed
Step 5
Using uTV 2
To pause/resume,
press access button
To change
volume,
press +/–
Step 4
Wearing uDirect 2
Step 6
Charging uDirect 2using the uTV 2
Step 2
Switch on uDirect™2and uTV™2
ON/OFF
Slide the power switch
to the on position
ON/OFF
Short press
Up to 30 m
(100 )
Place in slot
Note: please see your uTV 2guide for
more information.